• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.19-29
• /
• 2021

This paper presents the validation of the MCS code for critical safety analysis with burnup credit for the spent fuel casks. The validation process in this work considers five critical benchmark problem sets, which consist of total 80 critical experiments having MOX fuels from the International Criticality Safety Benchmark Evaluation Project (ICSBEP). The similarity analysis with the use of sensitivity and uncertainty tool TSUNAMI in SCALE was used to determine the applicable benchmark experiments corresponding to each spent fuel cask model and then the Upper Safety Limits (USLs) except for the isotopic validation were evaluated following the guidance from NUREG/CR-6698. The validation process in this work was also performed with the MCNP6 for comparison with the results using MCS calculations. The results of this work showed the consistence between MCS and MCNP6 for the MOX fueled criticality benchmarks, thus proving the reliability of the MCS calculations.

• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.33-41
• /
• 2022

Liquid Bi pool is a candidate electrode for an electrometallurgical process in the molten LiCl-KCl eutectic to treat the spent nuclear fuels from nuclear power plants. The electrochemical behavior of Bi³⁺ ions and the electrode reaction on liquid Bi pool were investigated with the cyclic voltammetry in an environment with or without BiCl₃ in the molten LiCl-KCl eutectic. Experimental results showed that two redox reactions of Bi³⁺ on inert W electrode and the shift of cathodic peak potentials of Li⁺ and Bi³⁺ on liquid Bi pool electrode in molten LiCl-KCl eutectic. It is confirmed that the redox reaction of lithium with respect to the liquid Bi pool electrode would occur in a wide range of potentials in molten LiCl-KCl eutectic. The obtained data will be used to design the electrometallurgical process for treating actinide and lanthanide from the spent nuclear fuels and to understand the electrochemical reactions of actinide and lanthanide at liquid Bi pool electrode in the molten LiCl-KCl eutectic.

• 방사성폐기물학회지
• /
• 제4권3호
• /
• pp.301-309
• /
• 2006

한국형처분시스템에 이용될 가압경수로형 사용후핵연료를 위한 KDC-1 처분용기를 개발하였다. 처분용기 안전성 평가의 일환으로서 처분용기에 대한 구조적 안전성을 평가하였다. 처분용기의 구조적 안전성은 처분조건과 취급조건 2가지로 구분하여 평가하였다. 처분조건에서는 3가지 하중 조건, 정상하중 조건, 비정상 하중 조건, 암반의 움직임을 고려하였다. 처분조건에서 평가 결과 3가지 조건에 대해 모두 안전계수가 설계기준보다 컸다. 취급조건에서는 처분용기 취급 중 구조해석과 처분용기 낙하 사고시 구조해석을 수행하였다. 취급장비 고장 시나리오 평가결과 1개 혹은 2개의 취급 장치가 고장을 일으켰을 때도 취급장비를 계속 운전하는 것이 가능하였다. 처분용기 낙하 시나리오에서는 계산결과 최대 응력은 0.762 MPa 이었으며, 이 값은 주철의 항복응력과 비교하면 거의 무시할 수 있는 값이었다. 본 논문에서 제안한 KDC-1 처분용기에 대한 처분조건 및 취급조건에서의 구조해석 결과, 한국형처분시스템에서 고려하고 있는 조건에서 그 구조적 안전성을 확인하였다.

• 방사성폐기물학회지
• /
• 제14권2호
• /
• pp.179-188
• /
• 2016

원자력발전소에서 전기를 생산하고 난 후 발생하는 사용후핵연료 또는 이들 사용후핵연료의 재처리/재활용 공정으로부터 발생하는 고준위폐기물은 인간환경으로부터 안전하게 장기간 격리시켜야 한다. 최근 심부시추공 굴착기술의 획기적인 발전으로 인하여, 방사성폐기물의 심부시추공 처분기술에 대한 연구가 의미 있게 진행되고 있다. 본 논문에서는 이러한 심부시추공을 활용하여 고준위 방사성폐기물을 지하 3~5 km 심도에 격리시키는 심부시추공 처분기술의 국내 적용 가능성을 분석하기 위하여 국내 심부 지하환경 특성에 대하여 예비분석 하였다 이를 위하여, 미국 및 유럽권 국가 연구사례와 기술개발 현황을 검토하고, 실제 국내의 심부 지질조건을 검토하기 위하여 고지열 분포지역에 개발 중인 지열 탐사공을 대상으로 3~4 km 심도까지의 암석, 지온 등 특성 자료를 수집, 분석하였다. 결정질 암반 심도 및 지온경사 등 분석 결과와 국내 발생 사용후 핵연료를 바탕으로 심부시추공 처분시스템 구성요소인 처분용기, 밀봉시스템 등에 대하여 예비단계의 개념을 제안하였다.

• 방사성폐기물학회지
• /
• 제20권2호
• /
• pp.193-207
• /
• 2022

Thermodynamically, TRUO_x, REO_x, and SrO_x can be chlorinated using ammonium chloride (NH₄Cl) as a chlorinating agent, whereas uranium oxides (U₃O₈ and UO₂) remain in the oxide form. In the preliminary experiments of this study, U₃O₈ and CeO₂ are reacted separately with NH₄Cl at 623 K in a sealed reactor. CeO₂ is highly reactive with NH₄Cl and becomes chlorinated into CeCl₃. The chlorination yield ranges from 96% to 100%. By contrast, U₃O₈ remains as UO₂ even after chlorination. We produced U/REO_x- and U/SrO_x-simulated fuels to understand the chlorination characteristics of the oxide compounds. Each simulated fuel is chlorinated with NH₄Cl, and the products are dissolved in LiCl-KCl salt to separate the oxide compounds from the chloride salt. The oxide compounds precipitate at the bottom. The precipitate and salt phases are sampled and analyzed via X-ray diffraction, scanning electron microscope-energy dispersive spectroscopy, and inductively coupled plasma-optical emission spectroscopy. The analysis results indicate that REO_x and SrO_x can be easily chlorinated from the simulated fuels; however, only a few of U oxide phases is chlorinated, particularly from the U/SrO_x-simulated fuels.

• 지질공학
• /
• 제13권2호
• /
• pp.171-191
• /
• 2003

본 연구의 목적은 고준위 방사성폐기물을 지하 심부 불연속 화강 암반 내에 처분할 때 처분공동 주변 절리에서의 장기간(500년)에 걸친 열수리역학적 연성거동 변화를 분석하고, 앞으로 처분 개념 설정에 활용 하고자 하는 것이다. 해석모델은 포화된 불연속 화강 암반, 처분공내 압축 벤토나이트로 둘러 쌓인 PWR 사용후 핵연료 및 처분용기, 그리고 처분동굴 내에 채워진 혼합 벤토나이트를 포함한다. 해석모델 내에는 2개의 절리 세트가 존재하는 것으로 가정하였다. 절리세트1은 20m간격의 $56^{\circ}$ 경사의 절리들로 구성되었고, 절리세트2는 절리세트1에 수직방향으로 20m간격의 $34^{\circ}$ 경사의 절리들로 구성되었다. 해석은 2차원 해석 코드인 UDEC을 사용하였다. 특히 공동 주변 절리에서의 거동변화를 파악하기 위하여 Barton-Bandis 절리 모델을 사용하였고, PWR 사용후 핵연료로부터의 시간의존 방사성 붕괴열 영향 분석 및 steady state 유동 알고리즘을 이용한 수리해석을 하였다.

• 분석과학
• /
• 제11권6호
• /
• pp.421-428
• /
• 1998

사용후핵연료의 화학특성을 규명하기 위하여 시료 중에 함유되어 있는 핵분열생성물 중 Zr을 분리, 정제하는 연구를 수행하였다. 우라늄과 핵분열생성물 대신 비방사성 금속이온들로 구성된 사용후핵연료 모의 용해용액을 시료로 사용하였다. 12 M HCl 용액으로 전처리한 Dowex $1{\times}8$ 음이온교환수지관에서 Ce, Nd, Cs, Rb, Ba, Sr, Ru, Rh, Pd, Ag 및 Cd을 용리시킨 후 5 M HCl 용액으로 Zr을 95% 이상 분리, 회수할 수 있었다. 용출액에 함유되어 있는 Zr 동위원소의 동중원소인 Mo을 제거하기 위하여 5 M HCl 용액으로 전처리한 Dowex $1{\times}8$ 음이온교환수지관에서 정제하였으며, 실제 PWR 사용후핵연료에 함유되어 있는 Zr 분리, 정제에 적용하여 질량분석한 결과 Mo 및 Sr에 의한 동중원소 영향이 나타나지 않았다.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1540-1554
• /
• 2023

To use nuclear energy sustainably, spent nuclear fuel, classified as high-level radioactive waste and inevitably discharged after electricity generation by nuclear power plants, must be managed safely and isolated from the human environment. In Korea, the land area is limited and the amount of high-level radioactive waste, including spent nuclear fuels to be disposed, is relatively large. Thus, it is particularly necessary to maximize disposal efficiency. In this study, a high-efficiency deep geological repository concept was developed to enhance disposal efficiency. To this end, design strategies and requirements for a high-efficiency deep geological repository system were established, and engineered barrier modules with a disposal canister for pressurized water reactor (PWR)-type and pressurized heavy water reactor type Canada deuterium uranium (CANDU) plants were developed. Thermal and structural stability assessments were conducted for the repository system; it was confirmed that the system was suitable for the established strategies and requirements. In addition, the results of the nuclear safety assessment showed that the radiological safety of the new system met the Korean safety standards for disposal of high-level radioactive waste in terms of radiological dose. To evaluate disposal efficiency in terms of the disposal area, the layout of the developed disposal areas was assessed in terms of thermal limits. The estimated disposal areas were 2.51 km² and 1.82 km² (existing repository system: 4.57 km²) and the excavated host rock volumes were 2.7 Mm³ and 2.0 Mm³ (existing repository system: 4.5 Mm³) for thermal limits of 100 ℃ and 130 ℃, respectively. These results indicated that the area and the excavated volume of the new repository system were reduced by 40-60% compared to the existing repository system. In addition, methods to further improve the efficiency were derived for the disposal area for deep geological disposal of spent nuclear fuel. The results of this study are expected to be useful in establishing a national high-level radioactive waste management policy, and for the design of a commercial deep geological repository system for spent nuclear fuels.

• Nuclear Engineering and Technology
• /
• 제40권1호
• /
• pp.9-20
• /
• 2008

Since plutonium accounts for 40-50% of the power produced by uranium fuels, spent fuel contains only residual plutonium. Management of this plutonium is one of the aspects influencing the choice of a fuel cycle back-end option: reprocessing, direct disposal or wait-and-see. Different grades and qualities of plutonium exist depending from their specific generation conditions; all are valuable fissile material. Safeguard authorities watch the inventories of civil plutonium, but access to those data is restricted. Independent evaluations have led to an estimated current inventory of 220t plutonium in total (spent fuel, separated civil plutonium and military plutonium). If used as MOX fuel, it would be sufficient to feed all the PWRs and BWRs worldwide during 7 years or to deploy a FBR park corresponding to 150% of today' s installed nuclear capacity worldwide, which could then be exploited for centuries with the current stockpile of depleted and spent uranium. The energy potential of plutonium deteriorates with storage time of spent fuel and of separated plutonium, due to the decay of $^{241}Pu$, the best fissile isotope, into americium, a neutron absorber. The loss of fissile value of plutonium is more pronounced for usage in LWRs than in FBR. However, keeping the current plutonium inventory for an expected future deployment of FBRs is counterproductive. Recycling plutonium reduce the required volume for final disposal in an underground repository and the cost of final disposal. However, the benefits of utilizing an energy resource and of reducing final disposal liabilities are not the only aspects that determine the choice of a back-end policy.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2288-2297
• /
• 2023

Current designs of both large reactor units and small modular reactors utilize a nuclear fuel with increasing enrichment. This increasing demand for better nuclear fuel utilization is a challenge for nuclear fuel handling facilities. The operation with higher enriched fuels leads to reduced reserves to legislative and safety criticality limits of spent fuel transport, storage and final disposal facilities. Design changes in these facilities are restricted due to a boron content in steel and aluminum alloys that are limited by rolling, extrusion, welding and other manufacturing processes. One possible solution for spent fuel pools and casks is the burnup credit method that allows decreasing very high safety margins associated with the fresh fuel assumption in spent fuel facilities. This solution can be supplemented or replaced by an alternative solution based on placing the neutron absorber material directly into the fuel assembly, where its efficiency is higher than between fuel assemblies. A neutron absorber permanently fixed in guide tubes decreases system reactivity more efficiently than absorber sheets between the fuel assemblies. The paper summarizes possibilities of fixed neutron absorbers for various nuclear fuel and fuel handling facilities. Moreover, an absorber material was optimized to propose alternative options to boron. Multiple effective absorbers that do not require steel or aluminum alloy compatibility are discussed because fixed absorbers are placed inside zirconium or steel cladding.