Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Fixed neutron absorbers for improved nuclear safety and better economics in nuclear fuel storage, transport and disposal

  • M. Lovecky (Research and Innovation Centre for Electrical Engineering, University of West Bohemia) ;
  • J. Zavorka (Research and Innovation Centre for Electrical Engineering, University of West Bohemia) ;
  • J. Jirickova (Research and Innovation Centre for Electrical Engineering, University of West Bohemia) ;
  • Z. Ondracek (TES s.r.o.) ;
  • R. Skoda (Research and Innovation Centre for Electrical Engineering, University of West Bohemia)
  • Received : 2022.10.25
  • Accepted : 2023.03.20
  • Published : 2023.06.25
Download PDF
⟨ Previous Next ⟩

Abstract

Current designs of both large reactor units and small modular reactors utilize a nuclear fuel with increasing enrichment. This increasing demand for better nuclear fuel utilization is a challenge for nuclear fuel handling facilities. The operation with higher enriched fuels leads to reduced reserves to legislative and safety criticality limits of spent fuel transport, storage and final disposal facilities. Design changes in these facilities are restricted due to a boron content in steel and aluminum alloys that are limited by rolling, extrusion, welding and other manufacturing processes. One possible solution for spent fuel pools and casks is the burnup credit method that allows decreasing very high safety margins associated with the fresh fuel assumption in spent fuel facilities. This solution can be supplemented or replaced by an alternative solution based on placing the neutron absorber material directly into the fuel assembly, where its efficiency is higher than between fuel assemblies. A neutron absorber permanently fixed in guide tubes decreases system reactivity more efficiently than absorber sheets between the fuel assemblies. The paper summarizes possibilities of fixed neutron absorbers for various nuclear fuel and fuel handling facilities. Moreover, an absorber material was optimized to propose alternative options to boron. Multiple effective absorbers that do not require steel or aluminum alloy compatibility are discussed because fixed absorbers are placed inside zirconium or steel cladding.

Keywords

Acknowledgement

R&D has been funded by TK02010102 Optimization of Dry Storage for Spent Nuclear Fuel.

References

  1. J. Abenojar, F. Velasco, M.A. Martinez, Optimization of processing parameters for the Al+10% B4C system obtained by mechanical alloying, Journal of Materials Processing Technology 184 (2007) 441-446. https://doi.org/10.1016/j.jmatprotec.2006.11.122
  2. J.C. Wagner, Ch.E. Sanders, Investigation of the effect of fixed absorbers on the reactivity of PWR spent nuclear fuel for burnup credit, Nuclear Technology 139 (2002) 91, 16.
  3. Control assembly materials for water reactors: experience, performance and perspectives. IAEA-TECDOC-1132, in: Proceedings of a Technical Committee Meeting Held in Vienna, 12-15 October 1998, Austria, 2000.
  4. J.C. Wagner, Computational Benchmark for Estimation of Reactivity Margin from Fission Products and Minor Actinides in PWR Burnup Credit, NUREG/CR6747, 2001.
  5. J. Leppanen, M. Pusa, T. Viitanen, V. Valtavirta, T. Kaltiaisenaho, The Serpent Monte Carlo code: status, development and applications in 2013, Annals of Nuclear Energy 82 (2015) 142-150. https://doi.org/10.1016/j.anucene.2014.08.024
  6. D.A. Brown, M.B. Chadwick, R. Capote, et al., ENDF/B-VIII.0: the 8th major release of the nuclear reaction data library with CIELO-project cross sections, new standards and thermal scattering data, Nuclear Data Sheets 148 (2018) 1-142. https://doi.org/10.1016/j.nds.2018.02.001
  7. M. Lovecky, J. Zavorka, R. Skoda, Neutron absorber concept in spent fuel casks aiming at improved nuclear safety and better economics, in: Proceedings of the 19th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2019), New Orleans, USA, August 4-9, 2019.
  8. M. Lovecky, J. Zavorka, J. Jirickova, R. Skoda, Criticality safety analysis of GBC32 spent fuel cask with improved neutron absorber concept, in: Proceeding of PHYSOR 2020, Cambridge, United Kingdom, March 29-April 2, 2020.
  9. J. Zavorka, M. Lovecky, R. Skoda, J. Jirickova, New neutron absorber in spent fuel casks aiming at improved nuclear safety and better economics, in: Proceedings of ICAPP 2021, Abu Dhabi, UAE, 16-20 October, 2021.
  10. R.W. Borchardt, Burnup Credit in the Criticality Safety Analyses of PWR Spent Fuel in Transportation and Storage Casks. Interim Staff Guidance 8 Revision 3, US NRC, 2012. SFST-ISG-8 Revision 3.
  11. L. Jutier, C. Riffard, A. Santamarina, E. Guillou, G. Grassi, D. Lecarpentier, F. Lauvaud, A. Coulaud, M. Hampartzounian, M. Tardy, S. Kitsos, Burnup credit implementation for PWR UOX used fuel assemblies in France: from study to practical experience, Nuclear Science and Engineering 181 (2015) 105-136. https://doi.org/10.13182/NSE14-51
  12. G. Rothwell, Spent nuclear fuel storage: what are the relationships between size and cost of the alternatives? Energy Policy 150 (2021), 112126.
  13. J. Kessler, Cost Estimate for an Away-From-Reactor Generic Interim Storage Facility (GISF) for Spent Nuclear Fuel, Electric Power Research Institute. EPRI, Technical Update, Palo Alto, 2009, 1018722.
  14. J. Zavorka, K. Klimek Gincelova, J. Jirickova, R. Skoda, Neutron absorber for VVER-1000 storage, transport and final disposal facilities, in: Proceedings of the International Conference Nuclear Energy for New Europe, Bled, Slovenia, September 6-9, 2021.
  15. D. Vlcek, Residual Heat Power Removal from Spent Nuclear Fuel during Dry and Wet Storage, Master thesis, Czech Technical University in Prague, Prague, 2018.
  16. J. Zavorka, M. Lovecky, J. Jirickova, R. Skoda, Enhanced nuclear safety of spent fuel, in: Proceedings of ICONE-27, Tsukuba, Japan, 19-24 May, 2019.
  17. M. Lovecky, J. Zavorka, J. Jirickova, R. Skoda, Neutron absorber for VVER-1000 final disposal cask, in: Proceedings of the International Conference Nuclear Energy for New Europe, Portoroz, Slovenia, September 7-10, 2020.
  18. M. Kostal, M. Svadlenkova, J. Milcak, Absolute determination of power density in the VVER-1000 mock-up on the LR-0 Research Reactor, Applied Radiation and Isotopes 78 (2013) 38-45. https://doi.org/10.1016/j.apradiso.2013.03.094
  19. J. Zavorka, M. Lovecky, R. Skoda, Calculation and verification of the new neutron absorbers in a well-defined core in LR-0 reactor, in: Proceedings of the International Conference Nuclear Energy for New Europe, Portoroz, Slovenia, September 12-15, 2022.
  20. J. Zavorka, M. Lovecky, J. Jirickova, R. Skoda, The experimental verification of the new neutron absorbers concept, Progress in Nuclear Energy 157 (2023), 104572.
  21. M. Lovecky, J. Zavorka, J. Jirickova, R. Skoda, Neutron Absorber. Utility Model CZ 34636 U1, Industrial Property Office of the Czech Republic, 2020.
  22. Z. Ondracek, Spent Nuclear Fuel Storage and Disposal Equipment. Utility Model CZ 35775 U1, Industrial Property Office of the Czech Republic, 2022.