• 한국정보과학회논문지:시스템및이론
• /
• 제34권2호
• /
• pp.73-83
• /
• 2007

네트워크 침입 방지에서 공격 패킷은 시그내쳐에 기반을 둔 방법에 의해 발견되어 제거된다. 패턴 매칭(Pattem Matching)은 공격 시그내쳐를 발견하기 위해 광범위하게 사용되고 있고, 또한 네트워크 침입방지 시스템에서 시간적으로 가장 많이 수행되는 부분이다. 네트워크 침입방지 시스템에 사용되는 패턴 매칭은 주로 하드웨어를 사용하여 가속화되며 회선 속도로 수행되어야 한다. 그러나 이것만으로는 충분치 않고 다음과 같은 조건들이 더 요구된다. 첫째, 패턴 매칭 하드웨어는 패턴 인덱스 번호와 패턴 발견위치를 포함한 충분한 패턴 매칭 정보를 회선 속도에 맞게 제공해야 한다. 둘째, 불필요한 패턴 매칭을 줄이기 위한 패턴 그룹을 지원할 수 있어야 한다. 셋째, 패턴의 개수가 증가하더라도 최저 성능을 보장 할 수 있어야 한다. 마지막으로, 수행 중단 없이 몇분 또는 몇초 이내에 패턴 업데이트가 가능해야 한다. 본 논문에서는 위의 요구사항을 만족하는 시스템 구조를 제안한다. 이 시스템은 여러 개의 패턴 문자를 동시에 처리하고 파이프라인 구조를 사용하여 고속의 처리를 가능케 한다. Xilinx FPGA 시뮬레이션을 통해 제안된 시스템이 10Gbps 이상의 속도에서 동작하며 위의 모든 요구사항을 만족시킴을 보였다.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.96-101
• /
• 2000

In machining with cutting tool inserts having complex chip groove shape the flow curl and breaking pattern of the chip are different than in flat-face inserts. In the present work an effort is made to understand the three basic phe-nomena occurring in a chip since its formation in machining with groove type and pattern type inserts. These are the ini-tial chip flow the subsequent development of up and side curl and the final chip breaking due to the development of tor-sional and bending stresses. in this paper chip flow angle in a groove type and pattern type inserts. The expres-sion for chip flow angle in groove type and pattern type inserts is also verified experimentally using high speed filming techniques.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.368-373
• /
• 2008

This paper will investigate the friction characteristics of a 100m Hexagonal Array, Micro-scale Dimple Pattern, on bearing steel. These characteristics are researched by utilizing a pin-on-disk wear test machine, under various test conditions. The reduction of friction is a necessary requirement for the improved efficiency of this machine. As the speed increases, there is a decrease in the effect of the dimple of friction characteristic, with substantially little change to density. Conversely, as the load increases, the dimple pattern grows larger, resulting in a difference in the texture of these two components. At a dimple density of 10% the friction characteristic is easily demonstrated, with a consistent change in both speed and load.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.502-505
• /
• 2005

To overcome some of the limitations in the conventional photolithography technique, MC-SPL which has advantages such as flexibility and high speed was developed in the past. To make a fine pattern using MC-SPL, there are many variables to control, for example, applied load, scribing speed, chemical etching condition, and etc. In this work, the effect of contact load on the width of the pattern was investigated. The load not only influences the width of the pattern but it also affects the wear of the probe tip. It was found that it is beneficial to load the tip in two stages. Futhermore, the experimental results showed that the pattern width was more sensitive to the initial contact force.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.174-179
• /
• 2007

The cutting automation of boat's wooden pattern is strongly required to improve the productivity and quality of boats in leisure boat industry. This paper is concerned with the development of wooden pattern machining technology by the machining center. The leisure boat is designed with a 3 dimensional design s/w. The NC cutting data are generated in a CAM s/w and are verified using verification s/w. The cutting forces are monitored to analyse the cutting process. The surface characteristics of machined surface are investigated at various cutting conditions such as spindle speed, feed speed, the cutting direction of wood, and wood material.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.55-64
• /
• 2016

The development of high-speed rail (HSR) has had a major impact on the power supply grid. Based on the monitored waveforms of HSR, a pattern recognition approach is proposed for the first time in this paper to identify the operating conditions. To reduce the data dimensions for monitored waveforms, the principal component analysis (PCA) algorithm was used to extract the characteristics and their waveforms from the monitored waveforms data. The dynamic time wrapping (DTW) algorithm was then used to identify the operating conditions of the HSR. Cases studies show that the proposed approach is effective and feasible, and that it is possible to identify the real-time operating conditions based on the monitored waveforms.

• 한국항해학회지
• /
• 제3권2호
• /
• pp.21-30
• /
• 1979

Echo sounder and Doppler sonar are to theultra-sonic transducers for measuring the depth and the ship's speed respectively. To measure the depth and speed with a single transducer, it is required to control the ultra-sonic beam to optional direction. In the past, the direction of the transducer itself is varied, but such a method provoked much problems in the mechanical design of the equipment. This paper deals with the method to control beam direciton by the phase control of the plural arrangement of transducers, and the results are studied by a computer simulation. The remarkable results of the study is condensed as follows; 1. The greater the interval of arrangement between transducers, the sharper the radiation pattern is, but in this case, the level of undesired sidelobe is also increased. 2. The control of radiation pattern up to 60 degree can be achieved by an adequate arrangement of more than 10 transducers. 3. It is shown that a simultaneous measurement of both depth and speed can be achieved by alternating directivity of the pulse by the method proposed in this paper.

• 한국정보처리학회논문지
• /
• 제1권1호
• /
• pp.99-104
• /
• 1994

본 논문은 LSI의 물리적 레이아웃 설계시 다량의 패턴 데이타를 고속으로 처리할 수 있는 새로운 2차원 병렬처리 방법을 제안한고 메모리와 프로세서간에 데이타를 양방향으로 고속 전송 하는 스위칭 네트워크를 설계하였다.이스위칭 네트워크를 VHDL 설계 시스템을 이용하여 시뮬레이션하여 그 동작을 확인하였다.

• 소성∙가공
• /
• 제31권2호
• /
• pp.89-95
• /
• 2022

3D printing products manufactured by material extrusion are used in many industrial fields recently. However, these products are difficult to use in the field due to their low tensile strengths. In order to solve this problem, research on improving the tensile strength of the output using a 3D printer has been continuously conducted. In this study, we performed a tensile test using Universal Testing Machine according to infill pattern, nozzle temperature, bed temperature, and printing speed conditions. Results revealed that tensile specimen of concentric shape had the highest tensile strength in infill pattern condition and that the tensile strength increased linearly with increasing nozzle and bed temperatures. However, the tensile strength decreased with increasing printing speed. Consequently, we confirmed that tensile strength could be increased and decreased depending on output conditions of 3D printing.

• PNF and Movement
• /
• 제17권1호
• /
• pp.47-56
• /
• 2019

Purpose: This study investigated the effects of neck pattern of proprioceptive neuromuscular facilitation (PNF) on balance and walking ability in patients with chronic stroke. Methods: Fourteen participants with chronic stroke were randomly assigned to vestibular rehabilitation and then divided into two groups: the neck pattern group or treadmill group. Each group underwent 20 sessions (20 minutes/day, five days/week, for four weeks). Patients were assessed with the Berg balance scale (BBS) and gait parameters (gait speed, cadence, step length, and double-limb support period) using a GAITRite system. Results: Vestibular rehabilitation for the neck pattern group and the treadmill group showed significant intragroup improvement on the BBS and in terms of gait speed, cadence, step length, and double-limb support period (p < 0.05). Vestibular rehabilitation was more effective for the neck pattern group than for the treadmill group in terms of the BBS (p = 0.00; 95% CI, 1.49-5.94), gait speed (p = 0.01; 95% CI, 0.05-0.16), cadence (p = 0.02; 95% CI, 0.54-4.99), and step length (p = 0.00, 95% CI, 1.55-4.62). Conclusion: This study used the neck pattern of PNF for vestibular rehabilitation in patients with chronic stroke. The results showed significant improvement in the patients' balance and walking ability. Therefore, the neck pattern of PNF for vestibular stimulation may be more effective than treadmill training to improve balance and walking ability in patients with chronic stroke.