• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.76-83
• /
• 2006

Each tire has a critical speed at which a standing wave phenomenon occurs along the circumferential direction. If the standing waves are formed, the tire temperature is rapidly increased and it leads to tire failure eventually. As the formation of the standing waves is closely related to the tire stiffness, the effect of the tread pattern needs to be studied numerically. The standing wave phenomenon of a tire model with tread pattern is predicted by an explicit finite element method. The critical speed of the tire with tread pattern is in a good agreement with the experiment and is $15{\sim}20\;km/h$ lower than that of the tire without tread pattern. The effects of the inflation pressure and the vertical load on the critical speed are also investigated by using the tire model with tread pattern.

• 한국통신학회논문지
• /
• 제34권1B호
• /
• pp.47-55
• /
• 2009

최근의 네트워크 침입탐지 시스템에서는 침입이 의심되는 패킷을 나타내는 데 정규표현식이 사용되고 있다. 고속 네트워크를 통해서 입력되는 패킷을 실시간으로 검사하기 위해서는 하드웨어 기반 패턴 매칭이 필수적이며 변화되는 패턴 규칙을 다루기 위해서는 FPGA와 같은 재구성 가능한 디바이스를 사용하는 것이 바람직하다. FPGA의 동작 속도 제한으로 바이트 단위의 패킷 검사로는 실시간 검사를 할 수 없는 경우에 이를 해결하기 위해서 여러 바이트 단위로 검사하는 것이 필요하다. 본 논문에서는 정규표현식 패턴 매칭을 n바이트 단위로 처리하는 하드웨어의 구조와 설계 방법을 제시하고 이에 대한 패턴 매칭 회로 생성기를 구현한다. Snort 규칙에 대해 FPGA로 합성된 하드웨어는 n=4일 때에 규칙에 따라서 $2.62{\sim}3.4$배의 처리 속도 향상을 보였다.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• 한국ITS학회 논문지
• /
• 제13권2호
• /
• pp.1-11
• /
• 2014

본 논문의 목적은 DSRC 기반 통행속도 이력데이터를 활용하여 IC-IC 구간 단위의 통행패턴을 도출하는 것이며, 이를 통해 방대한 이력정보 데이터의 활용도를 높이고, 단순하지만 정확성 높은 방법으로 도로의 통행패턴을 용이하게 파악할 수 있게 하는 것이다. 통행패턴 분류는 의사결정나무 기법을 적용하였고, 월 시간대 구간 단위로 분리된 통행패턴을 생성하여 시 공간이 변화되어도 이에 대응 가능하도록 하였다. 경부고속도로 서울TG~안성IC 구간을 대상으로 의사결정나무 기법을 적용한 결과, 요일 기준으로 (월)(화 수 목)(금)(토)(일) 5개 그룹으로 고정 통행패턴이 분류되었다. 분류 결과를 영동, 중부, 중부내륙 고속도로의 9개 구간에 적용하여 통계적 검증을 수행한 결과 약 93%의 적합도를 갖는 것으로 나타났다. 의사결정나무를 통한 통행패턴 오차를 개선하기 위하여 4개의 추가변수를 도입한 결과, "직전월의 소통상황"을 설명변수로 추가할 경우 통행속도 분산이 약 50% 감소함을 확인하였고, 실제 상황에 적용할 경우 소통 원활 시의 오차가 약 4% 감소되었다.

• 센서학회지
• /
• 제31권1호
• /
• pp.51-56
• /
• 2022

In this study an efficient method for detecting and monitoring engine misfiring, focusing on minute speed changes in the crankshaft is proposed., Its validity is verified using various misfiring cases. Typically, the crankshaft speed fluctuates around the normal value depending on the engine misfiring status. Even a minute speed change in the crankshaft can be estimated by measuring the rotation time of each tooth of the 118-tooth flywheel attached to the crankshaft with a 2-MHz timer. Therefore, a speed pattern for an in-line six-cylinder engine consists of 236 tooth rotation speeds corresponding to the two rotations of the crankshaft, in which all the cylinders complete four-stroke cycle. FFT analysis can reduce the number of components of a speed pattern from 236 to just four major components: - fundamental frequency_(f), 2f, 3f, 6f., - This makes the comparison of the misfiring cases simpler and faster. In the experiment, five engine status cases (one normal firing and, four misfiring cases) were simulated. While the 6f component was the largest for the normal case, the f component increased as misfiring occurred one, two apart, and two consecutive times. The 3D FFT pattern comprising the ratio of f, 2f, and 3f, 6f showed that the distance between the misfiring and normal states was larger

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.28-32
• /
• 1995

Bacause the chatter vibration is a main factor to damage on the quality and integrity, The cure is required peticurity in cykinderical plunge grinding. The chatter vibration relatied with wheel speed, workpiece and infeed rate. Therefore, we expressed more credible normal signal and chatter signal Pattern in accrdiance with wheel speed and acquired RMS signal of the accelerrometer. In thos study, after finding the chatter pattern, we applied two parameters, standard deviation and Kurtosis, to Neural Network.

• 한국음향학회지
• /
• 제22권7호
• /
• pp.554-561
• /
• 2003

음원과 수신기 사이의 거리가 고정된 상태에서 측정한 광대역 천이 신호의 스펙트럼에 나타나는 간섭 패턴으로부터 모드차단 주파수를 인식하고 이로부터 해저면 음속을 추정하기 위해 수치 모의 및 실험 결과 분석을 통해 고찰하였다. Pekeris 도파관 환경에 대한 수치 모의 결과는 주파수 변화에 따른 전달 손실 및 간섭 패턴 변화가 모드 차단 주파수와 밀접한 관련이 있으며 간섭 패턴의 변화로부터 모드 차단 주파수를 인식하는 것이 가능할 수 있음을 보여주었다. 수치 모의를 통해 고찰한 개념을 해상 실험을 통해 획득한 신호에 적용하여 모드 차단 주파수를 인식하고 해저면 음속을 추정하였다. 추정된 음속을 모델 입력 인자로 이용하여 예측한 전달 손실은 손실 수준 린 간섭 패턴에서 실험 결과 분석을 통해 산출한 것과 매우 유사한 결과를 나타내었다.

• 대한의용생체공학회:의공학회지
• /
• 제15권4호
• /
• pp.489-497
• /
• 1994

The most serious problems related to the cardiovascular prothesis are thrombosis and hemolysis. It is known that the flow pattern of cardiovascular prostheses is highly correlated with thrombosis and hemolysis. Laser Doppler Anemometry (LDA) is a usual method to get flow pattern, which is difficult to operate and has narrow measure region. Particle Image Velocimetry (PIV) can solve these problems. Because the flow speed of valve is too high to catch particles by CCD camera, high-speed camera (Hyspeed : Holland-Photonics) was used. The estimated maximum flow speed was 5m/sec and maximum trackable length is 0.5 cm, so the shutter speed was determined as 1000 frames per sec. Several image processing techniques (blurring, segmentation, morphology, etc) were used for the preprocessing. Particle tracking algorithm and 2-D interpolation technique which were necessary in making gridrized velocity pronto, were applied to this PIV program. By using Single-Pulse Multi-Frame particle tracking algorithm, some problems of PIV can be solved. To eliminate particles which penetrate the sheeted plane and to determine the direction of particle paths are these solving methods. 1-D relaxation fomula is modified to interpolate 2-D field. Parachute artificial heart valve which was developed by Seoul National University and Bjork-Shiely valve was testified. For each valve, different flow pattern, velocity profile, wall shear stress and mean velocity were obtained.

• 오토저널
• /
• 제8권3호
• /
• pp.46-54
• /
• 1986

Driving pattern of gasoline passenger car was measured and analyzed at some areas(6urban area routes, 4 radial routes, 4 circular routes)in Seoul city. Measured items were vehicle speed, engine speed, intake manifold vacuum, and fuel consumption. Driving pattern data were reappearanced with engine dynamometer. Results of this investigation might be summarized as below; 1. When we compared urban area route with radial or circular route in rush hour, it was found that the average vehicle speed was measured to be lower about 25% and fuel consumption to be higher about 12% in urban area route. 2. Average vehicle speed was measured to be higher about 30% and driving resistance output to be higher about 25% in non-rush hour, but average fuel economy was increased a little. 3. On the bases of average fuel economy and characteristics of exhaust emissions, optimum driving vehicle speed was found about 60 km/h in the 4th(top)and about 40km/h in the 3rd in driving of experimental engine. 4. Idling frequency and exhaust emissions of CO,HC were related to idling closely. But exhaust emission of NOx, which had nothing to do with idling frequency, had relation to acceleration time ratio.

• 농업과학연구
• /
• 제50권3호
• /
• pp.469-477
• /
• 2023

This study was conducted to evaluate the spraying performance according to the flight conditions of agricultural drones for the development of a variable control system. The analyzed flight conditions comprised six factors: spraying direction, flight speed, altitude, wind speed, wind direction, and rotor rotational speed. The ratio of the area sprayed on the water-sensitive paper was used as the coverage, and the distribution and amount of the coverage were evaluated. The coverage distribution based on the distance from the drone was used to evaluate a spray pattern, and the distribution was expressed as a Gaussian function approximation. In addition, the probability distribution based on coverage was expressed as the cumulative probability via Gamma function approximation to analyze the spraying efficiency in the target area. The results showed that the averaged coverage decreased significantly as the flight speed and wind speed increased, and the wind direction changed the spray pattern without a coverage decrease. This study contributes to the development of a control technique for the precision control system of agricultural drones.