• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.146-156
• /
• 2003

A numerical algorithm is developed to analyze the performance of a Unit-injector (UI) System for a diesel engine. The fundamental theory of the algorithm is based on the continuity equation of fluid dynamics. The loss factors that should be seriously regarded on the continuity equation are the compressibility effect of liquid fuel, the wall friction loss in high-pressure fuel lines of the system, the kinetic energy loss of fuel in the system, and the leakage of fuel out of the control volume. For an evaluation of the developed simulation algorithm, the calculation results are compared with the experimental outputs provided by the Technical Research Center of Doowon Precision Industry Co. (DPICO) ； the maximum pressure in the plunger chamber (P$\_$p/) and total amount of fuel injected into a cylinder per cycle (Q$\_$f/) at each operational condition. The result shows that the average error rate (%) of P$\_$p/ and Q$\_$f/ are 2.90% and 4.87%, respectively, in the specified operational conditions. Hence, it can be concluded that the analytical simulation algorithm developed in this study can be reasonably applied to the performance prediction of newly designed UI system.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.174-175
• /
• 2005

The purpose of this study is focused on the analysis of 3D complex flow and performance characteristics of a centrifugal pump with volute casing. The numerical analysis was performed by commercial code CFX-10 according to the variation of flow rate, which is changing from 5.847$m^3$/min to 6.865$m^3$/min. The rated rotational speed of close type impeller is 1750rpm. Turbulence model, k-${\omega}$ SST was selected to guaranty more accurate prediction of flow separation. The ICEM-CFD 10, reliable grid generation software was also adapted to secure high quality grid generation necessary for the reliable numerical simulation. The experimental results such as static head, brake horse power and efficiency of the centrifugal pump were compared with the numerical analysis results. The simulated results are good agreement with the experimental results less 5$%$ error.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.535-540
• /
• 2011

It is well known that abrasive waterjet (AWJ) was developed as a kind of high-density energy processing technologies. AWJ is used to obtain cutting quality of various materials such as metal, ceramics, glass and composite materials within a short manufacturing time because of the characteristics of heatless and noncontact processing. However, surface roughness and dimension error like round, burr, taper vary severely according to the processing conditions such as pressure, cutting speed, orifice diameter, stand off distance and abrasive flow rate. In this paper, the effect of the shape of mixing chamber on surface quality is studied. Three types of mixing chamber - round, parabolic, elliptical - are suggested and each performance is compared to that of cylindrical mixing chamber experimentally. From the result, is proved to be the optimal mixing chamber in the aspect of surface quality the parabolic one.

• 한국통신학회논문지
• /
• 제35권11A호
• /
• pp.1085-1090
• /
• 2010

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Cellular CDMA and Korean PCS. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a Cellular CDMA and K-PCS digital transmission system. The average frame error rate degradation of each system arc presented. From these experimental results, we show that in all practical cases UWB system can coexist with Cellular CDMA and K-PCS terminal without causing any dangerous interference.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권2호
• /
• pp.121-138
• /
• 2001

Due to large demand for high speed and great capacity for data transfer, WDM, which uses the wavelength division multiplexing technique, is known as alternative way to satisfy those demand for its flexible network operation and management, easy network expansion with existing networks, and enhancement of efficient data transfer rate. For these reasons, a new high capacity WDM optical communication network plan was established. Therefore, the quality of currently deployed optical cables with 81.6 km in length should be assessed to ensure if high capacity WDM system could be implemented on existing optical cables. Two important characteristic parameters, Transfer Loss and PMD (Polarization Mode Dispersion), were measured to evaluate quality of existing optical cable. Transfer Loss was measured at 0.244 dB per kilometer, which is lower than the design standard value at 0.275 dB/km. The measured PMD value gave at 0.030ps/km, and it, therefore, satisfies the value recommended by ITU-T (International Telecommunication Union-T) of 0.5ps/km. In addition, the transfer characteristic for existing 2.5 Gbps and 10 Gbps system were measured and evaluated, and the results showed that error-free transfer is very much feasible. Computer simulation for DWDM system, which is likely be a future backbone network in Korea, to assess the transfer characteristic using the same condition employed for 2.5 Gbps and 10 Gbps was carried out as well. The simulation verified that a stable network operation and reliable service could be provided.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.443-450
• /
• 2014

This paper presents a 20-Gb/s optical receiver circuit fabricated with standard 65-nm CMOS technology. Our receiver circuits are designed with consideration for parasitic inductance and capacitance due to bonding wires connecting the photodetector and the circuit realized separately. Such parasitic inductance and capacitance usually disturb the high-speed performance but, with careful circuit design, we achieve optimized wide and flat response. The receiver circuit is composed of a transimpedance amplifier (TIA) with a DC-balancing buffer, a post amplifier (PA), and an output buffer. The TIA is designed in the shunt-feedback configuration with inductive peaking. The PA is composed of a 6-stage differential amplifier having interleaved active feedback. The receiver circuit is mounted on a FR4 PCB and wire-bonded to an equivalent circuit that emulates a photodetector. The measured transimpedance gain and 3-dB bandwidth of our optical receiver circuit is 84 $dB{\Omega}$ and 12 GHz, respectively. 20-Gb/s $2^{31}-1$ electrical pseudo-random bit sequence data are successfully received with the bit-error rate less than $10^{-12}$. The receiver circuit has chip area of $0.5mm{\times}0.44mm$ and it consumes excluding the output buffer 84 mW with 1.2-V supply voltage.

• 한국전자파학회논문지
• /
• 제8권6호
• /
• pp.581-588
• /
• 1997

시변 페이딩 이동무선채널은 전송 선호의 전폭, 주파수 그리고 위상까지 랜덤하게 왜곡시키며 시간적으로 변하는 스펙트럼 null 을 가진다. 이러한 채널에 대해 위상왜곡에 민감한 성질과 느린 수렴속도를 가지는 기존의 등화기는 열악한 에러 성능을 나타낸다. 이 논문에서는, 단순하면서도 빠른 수렴속도의 Data - Recycling 알고리듬 을 위상왜곡에 강한 Fractionally Spaced 동화기(FSE) 구조에 적용하였으며 시변 이동통신 페이딩 채널에 대 해 다른 기존의 둥화기들과 비교하여 그 성능을 평가하였다. 그 결과 Data-Recycling FSE는 시변 이동통신채널의 특성을 빠르게 추적하는 능력과 위상왜곡에 대한 효과적인 보상능력으로 상당한 BER 성능개선을 나타내었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.402-404
• /
• 2013

수중에서의 무선통신 채널환경은 수심이나 염분 등에 의해 전달 속도가 다르며 해면이나 해저에 의해 다중 경로의 영향을 받는다. 본 논문에서는 이러한 다중 경로를 갖는 채널에서의 전송율을 높이기 위해 MIMO(Multi-Input-Multi-Output) 시스템에서의 부호화 기법과 등화기가 결합하여 동작하는 터보 등화기를 갖는 시스템을 사용하였다. 또한 다중경로로 인한 위상 오차 추정은 decision directed 방식의 효율적인 방안을 제시하고 시뮬레이션 하였다. 시뮬레이션 결과 본 논문에서는 제안한 방식을 통해 위상 오차에 대한 영향을 최소화 할 수 있었다.

• 한국정보처리학회논문지
• /
• 제2권3호
• /
• pp.374-381
• /
• 1995

디지탈 무전 통신 시스템을 설계하는 경우 원하는 송신 전력, 전송 속도와 비트 오율등 원하는 통신 품질을 얻기 위해서는 무선 채널의 영향을 고려하여야 한다. 무선 채널에서 통신 품질을 열화시키는 주된 원인으로는 송신점과 수신점 사이를 연결하는 다중 경로에 의한 페이딩을 들 수 있으므로 시스템 설계시에는 페이딩 현상을 정확하 게 나타내기 위한 채널의 모델이 필요하게 된다. 본 논문은 채널에서 발생되는 다중 경로 페이딩 현상과 지연 시간을 고려하는 채널 시뮬레이터 모델의 구성에 관한 것이 다. 제안된 모델의 성능 분석을 위하여 송신을 이용한 시뮬레이션을 수행하였다. 시뮬 레이션 결과 페이딩 수신 신호를 확률밀도 함수, 레벨 교차율, 평균 페이딩 지속시간 분포에서 이론치와 유사함을 얻을 수 있었다.

• 한국통신학회논문지
• /
• 제30권12C호
• /
• pp.1208-1213
• /
• 2005

최근 초 광대역(UWB) 시스템은 높은 데이터 전송율과 낮은 전력소모로 IEEE 802.15.3a에서 표준안으로 고려되고 있다. IEEE 802.15.3a에서 고려되고 있는 시스템 중에, 직접 확산초 광대역 통신(DS-UWB)은 UWB의 이점과 특성을 잘 이용한 시스템이라 할 수 있다. 하지만, DS-UWB의 에러율과 전송 용량은 다중 페이딩 채널에 의해 많은 제한을 받고 있다. 전송 용량과 에러율의 감소를 극복할 효과적이고 강력한 기법이 다중 안테나를 이용한 방법이라 하겠다. STBC는 전송 신호의 안정성 향상에 중점을 둔 시스템이지만, 전송율이 떨어진다. 그러나, V-BLAST는 전송 신호의 안정성은 떨어지지만, 전송율의 향상을 가져올 수 있다. 본 논문에서는 M진 DS-UWB에서 채널 용량을 높이고 안정성을 확보하기 위한 적응 다중 안테나 전송 기법을 제안한다. 제안된 시스템은 STBC와 V-BLAST의 한계점인 에러율과 처리량을 극복할 수 있는 장점을 가지고 있다. 이를 컴퓨터 모의실험으로 검증하였고 분석하였다.