기구 배광이 전체적인 조명환경에 미치는 영향은 크며, 기구배광은 반사판, 프리즘 설계 등으로 구현된다. 램프의 물리적 크기는 기구설계에 큰 영향을 미치기 때문에 램프에 의한 배광의 변화와 램프로 흡수되는 빛을 고려하여 기구를 설계하여야 한다. 기존의 반사파 설계 알고리즘의 경우 램프의 물리적인 크기를 고려하지 않았으며, 기구배광의 출력값도 몇몇의 경우에서는 오차가 발생하였다. 이에 본 논문에서는 램프의 크기를 고려한 반사판설계 알고리즘을 개발, 구현하여 이전의 기구설계 알고리즘이 가지고 있던 오차를 줄였으며 좋은 성과를 얻었다.
형광등용 조명기구에 사용되는 경명 반사판의 광학 설계 프로그램을 개발하였다. 이 프로그램은 조명기구 설계시간을 단축시킨다. SpeROD(Specular Reflector Optical Designer)는 2차원적인 조건들을 가지고 계산한다. 반사판 설계를 위해 고려되는 조건들은 목표배광, 반사판 그리고 Tangent Spiral Design 방법등이 있다. 본 논문에서는 SpeROD를 이용하여 지름 26mm(T8)의 형광램프와 폭 150mm의 반사판을 가지는 균일 배광 형태와 Bat-wing 배광형태의 반사판을 설계해보았다. 설계된 반사판의 형태에 대하여 배광에측 프로그램인 FIELD를 통하여 배광을 시뮬레이션 해 본 결과, 배광과 효율 면에서 만족스러운 결과를 얻었다.
This paper is aimed to develop an optical method for measuring 3-dimensional shapes of specular objects having curved surfaces. The existing methods measuring the shapes of specular objects have several common disadvantages: they may not work properly if the surface is highly specular like mirror surface or if the reflectance property is not uniform over the surface. And, they often require the a priori knowledege about the surface reflectance. To overcome these disadvantages, the measurement using double pass retroreflection method is proposed in this paper. For this measurement principle, an experimental measuring system is designed and prepared which is composed of a galvanometer scanner, a beam splitter, a laser source, a CCD camera, and a reflector made of retroreflective material. To verify the effectiveness of the measurement system a series of experiments are performaed for various specular objects. The results observed from the experiments show that the developed optical sensing system can be an effective mean of measuring the 3-D shapes of specular objects.
In this paper, ultrasonic tomography by the Mode-Converted Rayleigh wave (MCRW) in the back-scattered direction is presented. When a beam with a short pulse and narrow beam width enters a reflector with smooth surface, in general, two major arrivals can be observed in the output waveform: the specular reflection and the radiation of the MCRW from the reflector surface. The time-delay between the two waves is relatively large and thus can be measured easily. This large time-delay is due to the fact that the MCRW is slower than incident wave. In our method, this large time- delay is used for ultrasonic image reconstruction. To effectively detect the MCRW, the arrayed-receiving transducers are circularly arranged around the transmitter. In addition, a deconvolution method is employed to remove specular echo signals for reconstructing the MCRW image.
형광등용 조명기구에 사용되는 경면 반사판의 형상설계 프로그램(SpeROD)을 개발하였다. 이 프로그램은 조명기구 설계시의 많은 시행착오를 줄이고 설계시간을 단축시키며, 손쉽게 조명기구를 설계할 수 있게 도와준다. SpeROD(Specular Reflector Optical Designer)는 2차원적인 형상설계 과정을 밟으며, 대칭형태의 반사판을 기초로 한다. SpeROD의 주요 관점은 배광의 만족과 효율의 개선이다. SpeROD를 이용하여 설계된 반사판형태에 대하여 배광예측 프로그램을 통하여 배광을 시뮬레이션 해 본 결과, 배광면에서는 만족스러운 결과를 얻을 수 있었으며, 효율면에서도 상당한 진전을 가져올 수 있었다. SpeROD는 조명기구 반사판 설계시 간편화와 신속화에 도움을 줄 것이다.
양전자방출단층촬영기기의 검출기는 다수의 섬광 픽셀과 다수의 광센서를 사용하여 구성된다. 다수의 광센서를 사용함으로써 비용이 증가하고 신호처리가 복잡해진다. 본 연구에서는 적은 수의 광센서를 사용하여 비용의 감소와 간결한 신호처리가 가능한 검출기를 설계하였다. 섬광 픽셀과 적은 수의 광센서를 사용하고 모든 광센서에 빛을 전달하기 위해 광가이드를 사용하였다. 섬광 픽셀과 광가이드에는 광센서로 최대한의 빛을 전달하기 위해 반사체를 적용하였다. 반사체는 난반사체 및 거울반사체를 사용하였으며, 광가이드의 두께를 다르게 적용하여 평면 영상을 획득하였다. 획득된 평면 영상의 비교 분석을 통해 최적의 조합을 선택하였다. 그 결과 섬광 픽셀과 광가이드 모두 거울반사체를 사용하였을 경우, 모든 두께의 광가이드에서 우수한 평면 영상을 획득하였다. 광가이드는 섬광 픽셀의 영상이 형성된 지점의 분석 및 영상의 크기를 고려하여 3 mm 두께를 사용할 경우 최적의 영상이 획득되는 결과를 도출하였다.
Jin Ho Jung;Yong Choi;Johyeon Yun;Jiwoong Jung;Sangwon Lee
Nuclear Engineering and Technology
/
제56권7호
/
pp.2633-2640
/
2024
The purpose of this study was to investigate the effect of the reflector, surface treatment, and length of scintillation crystals on the performance of a time-of-flight and depth-of-interaction (TOF-DOI) PET detector with a dual-ended readout and to determine the best reflector and surface treatment. Various types of crystal arrays with three different reflectors (ESR, BaSO4, and Toray), three different lateral surface treatments (all-polished (AP), all-roughened (AR), and partially roughened (PR, three sides polished, and one side roughened)), and two different lengths (20 and 15 mm) were fabricated. The highest light collection efficiency and best energy resolution were achieved using a crystal with a diffuse reflector (BaSO4 for AP and Toray for AR). In contrast, the best coincidence timing resolution (CTR) was achieved using an AR crystal with a specular reflector (ESR). The best DOI resolution was achieved using an AR crystal with BaSO4. Moreover, the results measured with the 20 mm long crystals were similar to those measured with the 15 mm long crystals. Therefore, we concluded that the dual-ended readout PET detector employing the crystal with AR lateral surface treatment and ESR was a good candidate for TOF-DOI PET because it provided excellent CTR and adequate DOI resolution.
파장변이섬유를 사용한 새로운 반응 위치 측정 양전자방출 단층촬영기기 검출기를 개발하였으며, 이에 대한 최적화 작업을 수행하였다. 섬광체 2개와 파장변이섬유 3개를 사용하고, 파장변이섬유 끝에 센서를 부착하여 최적화 모듈을 설계하였다. 섬광체와 파장변이섬유 및 센서를 연결시키는 연결물질과 섬광체와 파장변이섬유의 반사체 물질에 따른 센서에서의 빛 수집율 및 센서별 빛 수집 비를 통해 최적의 조합을 도출하였다. 연결물질은 에폭시를 사용하고 반사체 물질은 섬광체와 파장변이섬유에서 각각 난반사체 및 거울반사체를 사용한 조합에서, 가장 높은 빛 수집율과 센서별 빛 수집 비를 보였다.
두 층의 섬광체와 각 층별 서로 다른 반사체의 사용과 섬광체와 감마선의 상호작용으로 발생한 빛 신호를 측정하기 위한 광센서로써 실리콘광전증배관(Silicon Photomultiplier, SiPM)을 사용하여 반응 깊이를 측정하는 검출기를 개발하였다. 층별 섬광 픽셀의 반사체의 종류를 다르게 사용함으로써 획득한 신호를 바탕으로 영상을 재구성할 경우 모든 섬광 픽셀이 서로 다른 위치에 기록되는 특징을 활용하여 섬광 픽셀과 감마선이 반응한 위치를 추적하였다. 아래층은 거울반사체를 사용하였으며, 위층은 난반사체를 사용하여 SiPM에서 획득되는 신호의 크기를 다르게 처리하였다. 섬광체 사이와 SiPM과 연결되는 부분은 광학적으로 연결되도록 광학 그리즈를 사용하여 급격한 굴절률 변화를 감소시켰다. 16개의 SiPM에서 획득한 신호는 앵거 방정식을 사용하여 4개의 신호로 감소시켰으며, 이를 사용하여 영상을 재구성하였다. 두 층으로 구성된 모든 섬광 픽셀이 재구성된 영상에 나타났으며, 이를 통해 섬광 픽셀과 감마선이 반응한 층을 구분할 수 있었다. 서로 다른 반사체를 사용하여 두 층의 반응 깊이를 측정하는 검출기를 전 임상용 양전자방출단층촬영기기에 적용할 경우 관심 시야 외곽에서 나타나는 공간분해능의 저하 현상을 해결할 수 있을 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.