• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.947-952
• /
• 2001

In this paper, a wideband SAW convolver using a parabolic horn waveguide was designed and its characteristics were investigated. The convolver was made with parabolic horn waveguide at compression ratio 9:1 for reducing propagation loss and for improving convolution efficiency between two input IDTs of center frequency 193.78 ㎒. The SAW convolver utilizing acoustic nonlinearities of piezoelectric material demonstrated that it can provide large S/N ratio and can be use for programmable matched filter(PMF) in spread spectrum communication system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.23-32
• /
• 2020

The compression sensing technology, CAFB, was developed to obtain the raw signal of the target structure by compressing it into a signal of the intended frequency range. At this point, for compression sensing, the CAFB can be optimized for various reference signals depending on the desired frequency range of the target structure. In addition, optimized CAFB should be able to efficiently compress the effective structural answers of the target structure even in sudden/dangerous conditions such as earthquakes. In this paper, the targeted frequency range for efficient structural integrity monitoring of relatively flexible structures was set below 10Hz, and the optimization method of CAFB for this purpose and the seismic response performance of CAFB in seismic conditions were evaluated experimentally. To this end, in this paper, CAFB was first optimized using Kobe seismic waveform, and embedded it in its own wireless IDAQ system. In addition, seismic response tests were conducted on two span bridges using Kobe seismic waveform. Finally, using an IDAQ system with built-in CAFB, the seismic response of the two-span bridge was wirelessly obtained, and the compression signal obtained was cross-referenced with the raw signal. From the results of the experiment, the compression signal showed excellent response performance and data compression effects in relation to the raw signal, and CAFB was able to effectively compress and sensitize the effective structural response of the structure even in seismic situations. Finally, in this paper, the optimization method of CAFB was presented to suit the intended frequency range (less than 10Hz), and CAFB proved to be an economical and efficient data compression sensing technology for instrumentation-monitoring of seismic conditions.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.450-456
• /
• 2006

The objectives of this study were to investigate physiological and psychological responses to the rustling sound of Korean traditional silk fabrics and to figure out objective measurements such as sound parameters and mechanical properties determining the human responses. Five different traditional silk fabrics were selected by cluster analysis and their sound characteristics were observed in terms of FFT spectra and some calculated sound parameters including level pressure of total sound (LPT), Zwicker's psychoacoustic parameters - loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z), and sound color factors such as ${\Delta}L\;and\;{\Delta}f$. As physiological signals, the ratio of low frequency to high frequency (LF/HF) from the power spectrum of heart rate variability, pulse volume (PV), heart rate (HR), and skin conductance level (SCL) evoked by the fabric sounds were measured from thirty participants. Also, seven aspects of psychological state including softness, loudness, sharpness, roughness, clearness, highness, and pleasantness were evaluated when each sound was presented. The traditional silk fabric sounds were likely to be felt as soft and pleasant rather than clear and high, which seemed to evoke less change of both LF/HF and SCL indicating a negative sensation than other fabrics previously reported. As fluctuation strength(Z) were higher and bending rigidity (B) values lower, the fabrics tended to be perceived as sounding softer, which resulted in increase of PV changes. The higher LPT was concerned with higher rating for subjective loudness so that HR was more increased. Also, compression linearity (LC) affected subjective pleasantness positively, which caused less changes of HR. Therefore, we concluded that such objective measurements as LPT, fluctuation strength(Z), bending rigidity (B), and compression linearity (LC) were significant factors affecting physiological and psychological responses to the sounds of Korean traditional silk fabrics.

• Earthquakes and Structures
• /
• v.10 no.2
• /
• pp.329-350
• /
• 2016

A parametric study was conducted to investigate the seismic deformation demands in terms of drift ratio, plastic base rotation and compression strain on rectangular wall members in frame-wall systems. The wall index defined as ratio of total wall area to the floor plan area was kept as variable in frame-wall models and its relation with the seismic demand at the base of the wall was investigated. The wall indexes of analyzed models are in the range of 0.2-2%. 4, 8 and 12-story frame-wall models were created. The seismic behavior of frame-wall models were calculated using nonlinear time-history analysis and design spectrum matched ground motion set. Analyses results revealed that the increased wall index led to significant reduction in the top and inter-story displacement demands especially for 4-story models. The calculated average inter-story drift decreased from 1.5% to 0.5% for 4-story models. The average drift ratio in 8- and 12-story models has changed from approximately 1.5% to 0.75%. As the wall index increases, the dispersion in the calculated drifts due to ground motion variability decreased considerably. This is mainly due to increase in the lateral stiffness of models that leads their fundamental period of vibration to fall into zone of the response spectra that has smaller dispersion for scaled ground motion data set. When walls were assessed according to plastic rotation limits defined in ASCE/SEI 41, it was seen that the walls in frame-wall systems with low wall index in the range of 0.2-0.6% could seldom survive the design earthquake without major damage. Concrete compressive strains calculated in all frame-wall structures were much higher than the limit allowed for design, ${\varepsilon}_c$=0.0035, so confinement is required at the boundaries. For rectangular walls above the wall index value of 1.0% nearly all walls assure at least life safety (LS) performance criteria. It is proposed that in the design of dual systems where frames and walls are connected by link and transverse beams, the minimum value of wall index should be greater than 0.6%, in order to prevent excessive damage to wall members.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2543-2551
• /
• 1997

This paper proposes a compression technique of image data, a variable length PN code and channel models which are required in CDMA communication system. It also analyzes their performances. Original images is compressed by 2-D DCT and its coefficients are quantized by optimal quantizer at compression rate 0.84bit/pel. Channel model 1 and 2 which are composed of 5 and 4 channels respectively are employed to be used in CDMA. Such a situation forces us to empoly variable length PN code, such as Chebyshev map for spread spectrum system. When average PN code length of model 1 and 2 is 44.4 and 26.7 chips respectively, the received image through these models under Gaussian noise with variance 1.75 is visually of the same quality as the transmitting image. Thus, the model 2 appears to be better in channel efficiency, comparing with channel model 1 and channel model which uses fixed length PN code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1067-1075
• /
• 2009

In this paper, we propose an adaptive companding scheme to effectively reduce PAPR (Peak-to-Average Power Ratio) of the OFDM (Orthogonal Frequency Division Multiplexing) signals, while considering both complexity and BER (Bit Error Rate) performance of systems. The proposed scheme adaptively alters the compression function in the transmitter and the expanding function in the receiver to simultaneously take into account the BER performance and the PAPR reduction. In this paper, we also measure in-band and out-of-band spectra of the proposed scheme, and observe the BER performance after applying the filtering to reduce the out-of-band radiation. As compared to the conventional companding algorithm, simulation results reveal that the proposed scheme achieves more reliable BER performance in all the cases of with and without the filtering, and has a good spectrum characteristic with effective PAPR reduction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11b
• /
• pp.27-32
• /
• 2004

Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A method for determining the dielectric relaxation time ${\tau}$ of floating 'monolayers on the water surface is presented. MDC floing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time ${\tau}$ of monolayers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area Am. Compression speed a was about 30,40,50mm/min. LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film.The physicochemical properties of the LB films were examined by UV absorption spectrum, SEM and AFM. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 3~9. Also, we then examined of the MIM device by means of I-V characteristic of the device is measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3290-3299
• /
• 2000

Digital watermarking has similar concepts with channel coding thechnique for transferring data with minimizing error in noise environment, since it should be robust to various kinds of data manipulation for protecting copyrights of multimedia data. This paper proposes a digital watermarking technique which is robust to various kinds of data manipulation. Intellectual property rights information is encoded using a convolutional code, and block-interleaving technique is applied to prevent successive loss of encoded data. Encoded intelloctual property rithts informationis embedded using spread spectrum technique which is robust to cata manipulation. In order to reconstruct intellectual property rights information, watermark signalis detected by covariance between watermarked image and pseudo rando noise sequence which is used to einbed watermark. Embedded intellectual property rights information is obtaned by de-interleaving and cecoding previously detected wtermark signal. Experimental results show that block interleaving watermarking technique can detect embedded intellectial property right informationmore correctly against to attacks like Gaussian noise additon, filtering, and JPEG compression than general spread spectrum technique in the same PSNR.

• Geomechanics and Engineering
• /
• v.14 no.2
• /
• pp.107-113
• /
• 2018

Coal samples with different joints morphology were subjected to uniaxial compression experiments, cracks evolution was recorded by Nikon D5300 and acoustic emission (AE) energy signals were collected by AEwin Test for Express-8.0. During loading process, coal samples deformed elastically with no obvious cracks changes, then they expanded gradually along the trace of the original cracks, accompanied by the formation of secondary cracks, and eventually produced a large-scale fracture. It was more interesting that the failure mode of samples were all shear shape, whatever the original cracks morphology was. With cracks and damage evolution, AE energy radiated regularly. At the early loading stage, micro damage and small scale fracture events only induced a few AE events with less energy, while large scale fracture leaded to a number of AE events with more energy at the later stage. Based on the multifractal theory, the multifractal spectrum could explain AE energy signals frequency responses and the causes of AE events with load. Multifractal spectrum width (${\Delta}{\alpha}$), could reflect the differences between the large and small AE energy signals. And another parameter (${\Delta}f$) could reflect the relationship between the frequency of the least and greatest signals in the AE energy time series. This research is helpful for us to understand cracks evolution and AE energy signals causes.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.64-70
• /
• 2013

In this paper, we suggest a new audio watermarking method for audio contents copyrights that can efficiently provide protection from MP3 compression attacks. Watermarks were inserted at the coefficients repeatedly from low frequencies to high frequencies after DCT transform in commonly used Cox's spread spectrum method. Because the methods using arbitrary coefficients are not effective, we use the new weight functions that make small losses for the watermark coefficients during attacks, using psychological acoustics. In the results of various sound clips, the suggested method had overall better outcomes than the Cox's method by preserving watermarks and reducing distortions of the original sounds.