• 한국해양공학회지
• /
• 제37권1호
• /
• pp.20-30
• /
• 2023

Modeling a nonlinear ocean wave is one of the primary concerns in ocean engineering and naval architecture to perform an accurate numerical study of wave-structure interactions. The high-order spectral (HOS) method, which can simulate nonlinear waves accurately and efficiently, was investigated to see its capability for nonlinear wave generation. An open-source (distributed under the terms of GPLv3) project named "HOS-ocean" was used in the present study. A parametric study on the "HOS-ocean" was performed with three-hour simulations of long-crested ocean waves. The considered sea conditions ranged from sea state 3 to sea state 7. One hundred simulations with fixed computational parameters but different random seeds were conducted to obtain representative results. The influences of HOS computational parameters were investigated using spectral analysis and the distribution of wave crests. The probability distributions of the wave crest were compared with the Rayleigh (first-order), Forristall (second-order), and Huang (empirical formula) distributions. The results verified that the HOS method could simulate the nonlinearity of ocean waves. A set of HOS computational parameters was suggested for the long-crested irregular wave simulation in sea states 3 to 7.

• 음성과학
• /
• 제11권3호
• /
• pp.131-142
• /
• 2004

Speaker identification system basically functions by comparing spectral energy of an individual production model with that of an input signal. This study aimed to develop a new speaker identification system from two parameters from the spectral energy of numeric sounds: difference sum and correlation coefficient. A narrow-band spectrogram yielded more stable spectral energy across time than a wide-band one. In this paper, we collected empirical data from four male speakers and tested the speaker identification system. The subjects produced 18 combinations of three-digit numeric. sounds !en times each. Five productions of each three-digit number were statistically averaged to make a model for each speaker. Then, the remaining five productions were tested on the system. Results showed that when the threshold for the absolute difference sum was set to 1200, all the speakers could not pass the system while everybody could pass if set to 2800. The minimum correlation coefficient to allow all to pass was 0.82 while the coefficient of 0.95 rejected all. Thus, both threshold levels can be adjusted to the need of speaker identification system, which is desirable for further study.

• 말소리와 음성과학
• /
• 제2권3호
• /
• pp.37-46
• /
• 2010

This study investigates acoustic characteristics of English and Korean voiceless sibilant fricatives as they appear before the three vowels, /i/, /$\alpha$/ and /u/. Three measurements - duration, center of gravity and major spectral peak - are employed to compare acoustic properties and vowel effect for each fricative sound. This study also investigates the question of whether Korean sibilant fricatives are acoustically similar to the English voiceless alveolar fricative /s/ or to the palato-alveolar /$\int$/. The results show that in the duration of frication noise, English /$\int$/ is the longest and Korean lax /s/ the shortest of the four sounds. It is also observed that English alveolar /s/ has the highest value, whereas Korean /s/ shows the lowest value in the frequency of center of gravity. In terms of major spectral peak, while English /s/ reveals the highest frequency, English /$\int$/ shows the lowest value. In addition, evidence indicates that there is a strong vowel effect in the fricative sounds of both languages, although the vowel effect patterns of the two languages are inconsistent. For instance, in the major spectral peak, both Korean lax /s/ and tense /$s^*$/ show significantly higher frequencies before the vowel /$\alpha$/ than before the other vowels, whereas both English /s/ and /$\int$/ exhibit significantly higher frequencies before the vowel /i/ than before the other vowels. These results indicate that Korean sibilant fricatives are acoustically distinct from both English /s/ and /$\int$/.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.209-226
• /
• 2002

When predicting unsteady flow and pressure fields around a structure in a turbulent boundary layer by Large Eddy Simulation (LES), velocity fluctuations of turbulence (inflow turbulence), which reproduce statistical characteristics of the turbulent boundary layer, must be given at the inflow boundary. However, research has just started on development of a method for generating inflow turbulence that satisfies the prescribed turbulence statistics, and many issues still remain to be resolved. In our previous study, we proposed a method for generating inflow turbulence and confirmed its applicability by LES of an isotropic turbulence. In this study, the generation method was applied to a turbulent boundary layer developed over a flat plate, and the reproducibility of turbulence statistics predicted by LES computation was examined. Statistical characteristics of a turbulent boundary layer developed over a flat plate were investigated by a wind tunnel test for modeling the cross-spectral density matrix for use as targets of inflow turbulence generation for LES computation. Furthermore, we investigated how the degree of correspondence of the cross-spectral density matrix of the generated inflow turbulence with the target cross-spectral density matrix estimated by the wind tunnel test influenced the LES results for the turbulent boundary layer. The results of this study confirmed that the reproduction of cross-spectra of the normal components of the inflow turbulence generation is very important in reproducing power spectra, spatial correlation and turbulence statistics of wind velocity in LES.

• 대한원격탐사학회지
• /
• 제15권4호
• /
• pp.307-319
• /
• 1999

The aim of this study is to assess the OSMI (Ocean Scanning Multi-spectral Imager), whose central bands are 443nm, 490nm, 510nm, 555nm, 670nm, and 865nm, for agricultural applications. Radiance measurements, used to determine per cent reflectance of canopies and soils, were acquired with spectro-radiometers (Li-1800;330∼1,100nm, GER-SFOV;350∼2,500nm, and MSR-7000; 300∼2,500nm) in situ for crops and indoors for soils. OSMI equivalent bands and their ratio values were prepared(20nm interval for bands 1∼5; 40nm interval for band 6) by averaging spectral reflectance values to the real OSMI bands and analyzed as to crop growth parameters, leaf area index (LAI), total dry matter, and growth index in crops and physiochemical properties in soils. Spectral variations for each growth stage in rice and for crop discrimination in upland crops were significant statistically. In soils, clay and water content, CEC (Cation Exchange Capacity), free iron oxide, and some cation content were correlated with the OSMI equivalent bands. The result of this study shows OSMI wave bands would be promising for agricultural application in terms of spectral information and resolution.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1460-1463
• /
• 2003

In this study, plastic detection technique was developed, applying remote sensing technology as a method to extract plastic wastes, which is one of the big causes of concern contributing to environmental destruction. It is possible to extract areas where plastic (including polypropylene and polyethylene) wastes are prominent, using ASTER data by taking advantage of its absorptive characteristics of ASTER/SWIR bands. The algorithm is applicable to define large industrial wastes disposal sites and areas where plastic greenhouses are concentrated. However, the detection technique with ASTER/SWIR data has some research tasks to be tackled, which includes a partial secretion of reference spectral, depending on some conditions of plastic wastes and a detection error in a region mixed with vegetations and waters. Following results were obtained after making comparisons between several detection methods and plastic wastes in different conditions; (a)'spectral extraction method' was suitable for areas where plastic wastes exist separated from other objects, such as coastal areas where plastic wastes drifted ashore. (single plastic spectral was used as a reference for the 'spectral extraction method') (b)On the other hand, the 'spectral extraction method' was not suitable for sites where plastic wastes are mixed with vegetation and soil. After making comparison of the processing results of a mixed area, it was found that applying both 'separation method' using un-mixing and ‘spectral extraction method’ with NDVI masked is the most appropriate method to extract plastic wastes. Also, we have investigated the possibility of reducing the influence of vegetation and water, using ASTER/TIR, and successfully extracted some places with plastics. As a conclusion, we have summarized the relationship between detection techniques and conditions of plastic wastes and propose the practical application of remote sensing technology to the extraction of plastic wastes.

• Spatial Information Research
• /
• 제14권1호
• /
• pp.85-94
• /
• 2006

영상융합은 저해상도 다중분광영상과 고해상도 전정영상을 통합시키는 기법으로서 현재 까지 널리 사용되고 있다 하지만, 기존의 사용되어온 방법은 융합과정시 적지않은 분광정보의 왜곡을 불러일으키거나 웨이블렛 기법과 같은 경우 주파수 분해 및 복원 과정이 필요하므로 처리시간이 길어지는 단점이 있다. 본 연구에서는 비교적 간단한 분광정보 보존 기법: 평활화 필터 기반 대체기법을 제안하였다. 이 기법은 단순화 시킨 태양 방사 및 지표면 반사 모델에 기반을 두고 있으며 저주파수 영역 필터링 영상과 전정영상의 해상도 비율을 이용하여 분광학적 특성의 왜곡을 최소화시키며 전정영상의 상세한 지형묘사를 그대로 유지 시킨다. 또한 이 방법은 RGB 의 컬러 합성 뿐만 아니라 단일밴드의 융합에도 적용 시킬 수 있다. 제안된 기법을 검증하기 위하여 IKONOS 전정영상과 다중분광영상을 이용하여 분광정보의 왜곡정도와 공간정보의 상세함에 대한 분석을 하였다. 시각적 검토 및 통계적 방법을 통해 기존의 융합기법과 비교한 결과 분광정보 보전의 측면에서 제안된 SFR 기반 융합기법이 더 나은 결과를 보여주었다.

• 대한원격탐사학회지
• /
• 제20권5호
• /
• pp.337-351
• /
• 2004

Our laboratory originally developed the compact, multi-spectral, automatic aerial photographic system PKNU3 to allow greater flexibility in geological and environmental data collection. We are currently developing the PKNU3 system, which consists of a color-infrared spectral camera capable of simultaneous photography in the visible and near-infrared bands; a thermal infrared camera; two computers, each with an 80-gigabyte memory capacity for storing images; an MPEG board that can compress and transfer data to the computers in real-time; and the capability of using a helicopter platform. Before actual aerial photographic testing of the PKNU3, we experimented with each sensor. We analyzed the lens distortion, the sensitivity of the CCD in each band, and the thermal response of the thermal infrared sensor before the aerial photographing. As of September 2004, the PKNU3 development schedule has reached the second phase of testing. As the result of two aerial photographic tests, R, G, B and IR images were taken simultaneously; and images with an overlap rate of 70% using the automatic 1-s interval data recording time could be obtained by PKNU3. Further study is warranted to enhance the system with the addition of gyroscopic and IMU units. We evaluated the PKNU 3 system as a method of environmental remote sensing by comparing each chlorophyll image derived from PKNU 3 photographs. This appraisement was backed up with existing study that resulted in a modest improvement in the linear fit between the measures of chlorophyll and the RVI, NDVI and SAVI images stem from photographs taken by Duncantech MS 3100 which has same spectral configuration with MS 4000 used in PKNU3 system.

• 대한원격탐사학회지
• /
• 제22권6호
• /
• pp.613-619
• /
• 2006

본 연구는 원격 탐사의 영상 처리에서 영상 분할의 상위 수준으로 응집 계층 clustering의 dendrogram을 통한 무감독 영상 분류를 제안한다. 제안된 알고리즘은 분광 영역에서 정의된 RAG (Regional Agency Graph)와 min-heap 자료 구조를 이용하여 MCSNP (Mutual Closest Spectral Neighbor Pair)의 집합을 검색하면서 합병을 수행하는 계층 clustering 방법이다. 계산 시간과 저장 기억의 사용에 대한 효율을 증가시키기 위해 분광적 인접성을 정의하는 분광 공간(spectral space)내의 다중 창을 사용하였고 RNV (Region Neighbor Vector)을 이용하여 합병에 의하여 변하는 RAG 갱신하였고 적정한 단계 수가 주어진다면 제안된 알고리즘은 집단 합병의 계층적 관계를 쉽게 해석 할 수 있는 dendrogram을 생성한다. 본 연구는 simulation 자료를 사용하여 광범위하게 제안된 알고리즘에 대한 평가 실험을 수행 하였으며 실험 결과는 알고리즘의 효율성을 입증하였다. 또한 한반도에서 관측된 방대한 크기의 QuickBird 영상의 적용 결과는 제안된 알고리즘이 무감독 영상 분류를 위한 강력한 수단임을 보여준다.

• 대한원격탐사학회지
• /
• 제19권6호
• /
• pp.411-419
• /
• 2003

광학영상에서 개별 화소에 해당하는 공간은 반사특성이 상이한 두 개 이상의 지표물이 존재하는 경우가 대부분이나, 기존의 영상처리는 각 화소를 단일의 지표물로 가정하여 처리하였다. 본 연구에서는 분광혼합분석(spectral mixture analysis)을 이용하여 개개의 화소를 구성하고 있는 두 가지 이상의 지표물을 점유비율에 따라 분해하고 그 결과의 활용 가능성을 분석하였다. 경기도 광릉시 험림을 대상으로 Landsat-7 ETM+ 영상을 획득하여 대기보정 및 지형효과에 의한 복사보정을 실시하였다. 선형혼합모델을 통하여 각 화소를 6개 단위지표물(endmember)의 점유비율로 분해하였다. 각 endmember의 점유비율을 나타내는 영상들을 조합하여 보다 세부적인 임상분류가 가능하였다. 토양의 점유비율을 이용하여 수관울폐도와 관련된 정보의 추출도 가능하다고 판단된다. 또한 침엽수림의 화소값에 그늘에 의한 영향이 많다는 것을 알 수 있었다. 산림의 다양하고 복잡한 구성요소를 감안한다면 분광혼합분석은 기존의 영상처리방법에서 얻을 수 없었던 세부적인 산림정보의 추출을 위한 새로운 도구로 기대 된다.