• Bulletin of the Korean Chemical Society
• /
• v.24 no.7
• /
• pp.967-970
• /
• 2003

A new modified singular value decomposition method, piecewise polynomial truncated SVD (PPTSVD), which was originally developed to identify discontinuity of the earth's radial density function, has been used for large solvent peak suppression and noise elimination in nuclear magnetic resonance (NMR) signal processing. PPTSVD consists of two algorithms of truncated SVD (TSVD) and L₁ problems. In TSVD, some unwanted large solvent peaks and noise are suppressed with a certain soft threshold value, whereas signal and noise in raw data are resolved and eliminated in L₁ problems. These two algorithms were systematically programmed to produce high quality of NMR spectra, including a better solvent peak suppression with good spectral line shapes and better noise suppression with a higher signal to noise ratio value up to 27% spectral enhancement, which is applicable to multidimensional NMR data processing.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.1
• /
• pp.33-42
• /
• 2021

The design response spectrum presented in the seismic design standard reflects the characteristics of the tectonic environment at a site. However, since the design response spectrum does not represent the ground motion with a specific earthquake magnitude or distance, input ground motions for response history analysis need to be selected reasonably. It is appropriate to use observed ground motions recorded in Korea for the seismic design. However, recently recorded ground motions in the Gyeongju (2016) or Pohang (2017) earthquakes are not compatible with the design response spectrum. Therefore, it is necessary to convert the recorded ground motion in Korea to a model similar to the design response spectrum. In this study, several approaches to adjust the spectral acceleration level at each period range were tested. These are the intrinsic and scattering attenuation considering the earthquake environment, magnitude, distance change by the green function method, and a rupture propagation direction's directivity effect. Using these variables, the amplification ratio for the representative natural period was regressed. Finally, the optimum condition compatible with the design response spectrum was suggested, and the validation was performed by converting the recorded ground motion.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.531-548
• /
• 2012

To identify Cochlodinium polykrikoides red tide from non-red tide water (satellite high chlorophyll waters) in the South Sea of Korea (SSK), we improved a spectral classification method proposed by Son et al.(2011) for the world first Geostationary Ocean Color Imager (GOCI). C. polykrikoides blooms and non-red tide waters were classified based on four different criteria. The first step revealed that the radiance peaks of potential red tide water occurred at 555 and 680 nm (fluorescence peak). The second step separated optically different waters that were influenced by relatively low and high contributions of colored dissolved organic matter (CDOM) (including detritus) to chlorophyll. The third and fourth steps discriminated red tide water from non-red tide water based on the blue-to-green ratio, respectively. After applying the red tide classification, the spectral response of C. polykrikoides red tide water, which is influenced by pigment concentration as well as CDOM (detritus), showed different slopes for the blue and green bands (lower slope at blue bands and higher slope at green bands). The opposite result was found for non-red tide water. This modified spectral classification method for GOCI led to increase user accuracy for C. polykrikoides and non-red tide blooms and provided a more reliable and robust identification of red tides over a wide range of oceanic environments than was possible using chlorophyll a concentration, or proposed red tide detection algorithms. Maps of C. polykrikoides red tide in SSK outlined patches of red tide covering the area near Naro-do and Tongyeong during the end of July and early of August, 2012 and extending into from Wan-do and Geoje-do during the middle of August, 2012.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.163-166
• /
• 2002

OFDM should be used for the fourth generation communication for high speed communication. Because of high spectral efficiency and high tolerance to fading channel, OFDM is applied to many high speed wire and wirless communication such as DAB(Digital Audio Broudcast), DVB(Digital Video Broadcast), IMT 2000 etc. Inter-modulation, however, is derived from PAR(Peak to Average Power Ratio) of OFDM signals. The paper describes PTS(Partial Transmit Sequence) and SLM(Select Mapping) of an existing methods which can reduce PAR. And then the document introduces the new method that is called "Combine PAR method". The method proposed in this paper is to combine PTS and SLM. As a result of the simulation, Combine PAR method is better than the existing methods.g methods.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.896-904
• /
• 2004

In this paper, We present an efficient variable rate speech coder for spectral efficiency and packet processing technique for packet loss compensation of a voice codec with 10msec frame in VoIP service. Through disconnecting the users from the spectral resource during silence interval of about 60% period, a variable rate voice coder based on a voice activity detection(VAD) can increase spectral gain by two times. The performance of the method was analyzed by variation of detected voice activity factor and degraded speech frame ratio under various background noise level, and compared those of G.729B of ITU-T 8kbps standard speech codec. A method to compensate lost packets utilized addition of recovery data to a main stream and error concealment scheme for speech quality enhancement, the performance is verified by reconstructed speech quality. The proposed scheme can achieve spectral gain by two times or enhance speech quality by 3dB through reserved bandwidth of VAD. Therefore, the proposed method can enhance a spectral efficiency or speech quality of VoIP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.42-49
• /
• 2003

OFDM should be used for the fourth generation communication for high speed communication. Because of high spectral efficiency and high tolerance to fading channel, OFDM is applied to many high speed wire and wireless communication such as DAB (Digital Audio Broadcast), DVB(Digital Video Broadcast), IMT 2000 etc. Inter-modulation, however, is derived from PAR(Peak to Average Power Ratio) of OFDM signals. The paper describes PTS(Partial Transmit Sequence) and SLM(Select Mapping) of an existing methods which can reduce PAR. And then this papers proposed the new method that is called "Combine method". The method proposed in this paper is to combine PTS and SLM. As a result of the simulation, Combine PAR method is better than the existing methods.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.150-159
• /
• 2005

This paper addresses a voice personality transformation algorithm which makes one person's voices sound as if another person's voices. In the proposed method, one person's voices are represented by LPC cepstrum, pitch period and speaking rate, the appropriate transformation rules for each Parameter are constructed. The Gaussian Mixture Model (GMM) is used to model one speaker's LPC cepstrums and conditional probability is used to model the relationship between two speaker's LPC cepstrums. To obtain the parameters representing each probabilistic model. a Maximum Likelihood (ML) estimation method is employed. The transformed LPC cepstrums are obtained by using a Minimum Mean Square Error (MMSE) criterion. Pitch period and speaking rate are used as the parameters for prosody transformation, which is implemented by using the ratio of the average values. The proposed method reveals the superior performance to the previous VQ-based method in subjective measures including average cepstrum distance reduction ratio and likelihood increasing ratio. In subjective test. we obtained almost the same correct identification ratio as the previous method and we also confirmed that high qualify transformed speech is obtained, which is due to the smoothly evolving spectral contours over time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.831-840
• /
• 2010

In this paper, we propose a hearing impairment simulator considering reduced frequency selectivity and asymmetrical auditory filter of the hearing impaired, and we verified the reduced frequency selectivity and asymmetrical auditory filter affected in speech perception through experiments. The reduced frequency selectivity has made embodied by spectral smearing using LPC(linear prediction coding). The shapes of auditory filter are asymmetrical different with each center frequency. Hearing impaired person which has hearing loss was differently changed with that of normal hearing people and it has different value for speech of quality through auditory filter. The experiments confirmed subjective test and objective test. The subjective experiments are composed of 4 kinds of tests: pure tone test, SRT(speech reception threshold) test, and WRS(word recognition score) test without spectral smearing, and WRS test with spectral smearing. The experiment of the hearing impairment simulator was performed from 9 subjects who have normal ears. The amount of spectral smearing was controlled by LPC order. The asymmetrical auditory filter of proposed hearing impairment simulator was simulated and then some tests to estimate the filter's performance objectively were performed. The objective experiment as simulated auditory filter's performance evaluation method used PESQ(perceptual evaluation of speech quality) and LLR(log likelihood ratio) for speech through auditory filter. The processed speech was evaluated objective speech quality and distortion using PESQ and LLR value. When hearing loss processed, PESQ and LLR value have big difference according to asymmetrical auditory filter in hearing impairment simulator.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.141-148
• /
• 2003

This paper presents and compares several techniques that detect the symbol rate of unknown received signal. Symbol rate is detected from the power spectral density of the circuits such as the delay and multiplier circuit, the square law circuit, and analytic signal, etc. As a result of discrete Fourier transform of the output signals of these circuits, a lot of spectral lines and some peaks appear in frequency domain and the position of first peak is corresponding to the symbol rate. If a spectral line on the frequency that is not located in symbol rate is larger than the first peak, the symbol rate is erroneously detected. Thus, the ratio between the value of first peak and the highest side spectral line is used for the measure of the performance of symbol rate detector. For the MPSK modulation, the analytic signal method shows better performance than the delay and multiplier and square law circuits when the received signal power is lager than -20dB. It is also noted that the delay and multiplier circuit is not able to detect the symbol rate for the QAM modulation.

• Korean Journal of Remote Sensing
• /
• v.17 no.2
• /
• pp.165-181
• /
• 2001

Using a field spectrometer having a spectral range of 0.4$\mu\textrm{m}$~2.5$\mu\textrm{m}$ with a spectral resolution of 1nm, the researchers measured the reflectance of granite, andesitic rocks, sedimentary rocks, and pyrophyllite ore in the Ungsang area, Kyungsang Basin, South Korea. Spectral characteristics of the geological media were investigated from the analysis. The in-situ measured sites were selected in well exposed rock outcrops. In case of unfavorable weather conditions, rocks were sampled and remeasured under natural solar condition. The reflectance of field data was measurd at three sistes for granite, six sites for andesitic rock three sites for sedimentary rocks, and two sites for pyrophyllite ore. The vibrational absorption bands for pyrophyllite are detected in the spectral range of 2.0$\mu\textrm{m}$~2.5$\mu\textrm{m}$. The absorption band for granites in study area is not distinctive. The reflectance measured under normal field conditions showed strong absorption at wavelengths of 1.4$\mu\textrm{m}$ and 1.9$\mu\textrm{m}$ due to the effect of moisture in the atmosphere. After the bands of 1.4$\mu\textrm{m}$ and 1.9$\mu\textrm{m}$ were removed, Hull Quotient method was applied to characterize absorption bands. The reflectances of field data were calculated to estimate the band ratio corresponding to the Landsat TM and EOS Terra ASTER. The researchers suggest here that the TM band2, band3, band4, and band7 or ASTER band2, band3, band4, and band9 are the best combination for discriminating outcrops. The researchers tested and demonstrated using a Landsat TM image in the study area. For geologic applications, decorrelation stretch is also an effective tool to enhance the exposed rock mass in images.