• 천문학회보
• /
• 제44권1호
• /
• pp.35.3-35.3
• /
• 2019

Blazars are a subclass of active galactic nuclei (AGNs) with relativistic jets aligned with our line of sight. The jet physics is yet to be understood, but can be studied with blazar variability (e.g., flares). The highly variable blazar 3C 279 has shown a general decline of its radio flux density since 2013, but the flux density has been increasing since 2017. To better understand physical properties of 3C 279 related with the flux variations, we analyze multi-frequency new radio data obtained with Korean VLBI Network (KVN), as well as archival data from Owens Valley Radio Observatory (OVRO) and Submillimeter Array (SMA). We measure the radio spectral variability and infer the relativistic jet properties of 3C 279. The high-cadence OVRO and SMA observations are used to construct detailed light curves of the source, and KVN data supplement the spectral coverage and allow us to locate the spectral break frequencies precisely. In this talk, we present our analysis results and interpret them using a blazar jet model.

• 한국멀티미디어학회논문지
• /
• 제7권12호
• /
• pp.1639-1649
• /
• 2004

In this paper, a method for detection of forged signatures based on spectral analysis of directional gradient density function and a weighted fuzzy classifier is proposed. The well defined outline of an incoming signature image is extracted in a preprocessing stage which includes noise reduction, automatic thresholding, image restoration and erosion process. The directional gradient density function derived from extracted signature outline is highly related to the overall shape of signature image, and thus its frequency spectrum is used as a feature set. With this spectral feature set, having a property to be invariant in size, shift, and rotation, a weighted fuzzy classifier is evaluated for the verification of freehand and random forgeries. Experiments show that less than 5% averaged error rate can be achieved on a database of 500 signature samples.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.1-9
• /
• 1999

For roughened annular pipes with diameter ratios of 0.26, 0.39, and 0.56 and with Reynolds numbers ranging 13,000 to 67,000, friction factor, autocorrelation coefficients, power spectral density functions, and integral length scales for each flow condition using X-type hot wire anemometry system are experimentally investigated. Distributions of these quantities show that the times which the streamwise autocorrelation coefficients become zero first increase with decreasing the radius ratios of concentric annuli and Reynolds numbers, however the power spectra density functions increase with increasing the radius ratios and Reynolds number.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1343-1348
• /
• 2014

The low frequency noise in Silicon Nanowire Field Effect Transistors is analyzed by characterizing the gate electrode dependence on various geometrical parameters. It shows that gate electrodes have a strong impact in the flicker noise of Silicon Nanowire Field effect transistors. Optimization of gate electrode was done by comparing different performance metrics such a DIBL, SS, $I_{on}/I_{off}$ and fringing capacitance using TCAD simulations. Molybdenum based gate electrode showed significant improvement in terms of high drive current, Low DIBL and high $I_{on}/I_{off}$. The noise power sepctral density is reduced by characterizing the device at higher frequencies. Silicon Nanowire with Si3N4 spacer decreases the drain current spectral density which interms reduces the fringing fields there by decreasing the flicker noise.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.188-195
• /
• 2000

This study was conducted to measure the moisture content of powdered food using RF impedance spectroscopic method. In frequency range of 1.0 to 30㎒, the impedance such as reactance and resistance of parallel plate type sample holder filled with wheat flour and red-pepper powder of which moisture content range were 5.93∼-17.07%w.b. and 10.87 ∼ 27.36%w.b., respectively, was characterized using by Q-meter (HP4342). The reactance was a better parameter than the resistance in estimating the moisture density defined as product of moisture content and bulk density which was used to eliminate the effect of bulk density on RF spectral data in this study. Multivariate data analyses such as principal component regression, partial least square regression and multiple linear regression were performed to develop one calibration model having moisture density and reactance spectral data as parameters for determination of moisture content of both wheat flour and red-pepper powder. The best regression model was one by the multiple linear regression model. Its performance for unknown data of powdered food was showed that the bias, standard error of prediction and determination coefficient are 0.179% moisture content, 1.679% moisture content and 0.8849, respectively.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.350-358
• /
• 2012

This paper deals with accuracy of accumulated fatigue damage estimation using stochastic fatigue analysis method based on Rayleigh PDF. From full scale measurement data on an 8100TEU container vessel, zero-order spectral moments for wave- and vibration-induced energy spectral densities are determined on the probability level of 99%. 80 simulation cases in total are prepared according to the variation of ratio of zero-order spectral moments and center frequency of vibration ESD. By using inverse Fourier transformation and rainflow cycle counting for the combined ESD of wave and vibration, exact fatigue damages are derived. Fatigue damages in frequency domain based on Rayleigh PDF show large conservativeness compared to exact fatigue damages in times domain. The main cause of the excessive conservativeness is analyzed by two aspects: ratio of zero crossing and peak frequencies and ratio of initial zero order spectral moments and zero order spectral moments from rainflow stress range distributions. Finally, a guideline of applicability of Rayleigh PDF is proposed for wide band processes.

• 자원환경지질
• /
• 제17권4호
• /
• pp.237-243
• /
• 1984

최대 엔트로피 스펙트럼 분석 (Maximum entropy spectral analysis)에 관한 Burg알고리즘 (algorithm)의 계산효율과 안정성에 대하여 검토하였다. Burg의 방법은 Yule-Walker의 방법보다 계산효율이 낮을 뿐만 아니라 그의 수학적 불합리성으로 인하여 간혹 불안전할 때가 있다. 이러한 불합리성을 인공 시계열의 해석을 통하여 증명한 후 보다 안정하고 효과적인 방법을 소개하였다. 또한 파워 스펙트럼밀도 (Power spectral density)의 계산에서 Goertzel알고리즘을 이용하는 효율적인 방법도 소개하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.853-855
• /
• 2003

Microphytobenthos that supply nutrients to the intertidal ecosystem play an important part as a primary producer. If we estimate distribution and density of microphytobenthos, we can possibly calculate a volume of primary product in the tidal flat and its effect to the intertidal ecosystem. To estimate the portion of microphytobenthos, we used a linear spectral unmixing (LSU) method. LSU is a tool for inference the proportions of the pure components (or end-members) in a mixed pixel. The selection of end-members is critical to LSU. The end-members can be selected either from spectral libraries built from field surveys or from a remotely sensed image. We compared the two approaches of end-member selection, and the preliminary results showed end-members from from spectral library are as effective as those from image itself.

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.257-289
• /
• 2015

Shear connectors are generally used to link the slab and girders together in slab-on-girder bridge structures. Damage of shear connectors in such structures will result in shear slippage between the slab and girders, which significantly reduces the load-carrying capacity of the bridge. Because shear connectors are buried inside the structure, routine visual inspection is not able to detect conditions of shear connectors. A few methods have been proposed in the literature to detect the condition of shear connectors based on vibration measurements. This paper proposes a different dynamic condition assessment approach to identify the damage of shear connectors in slab-on-girder bridge structures based on power spectral density transmissibility (PSDT). PSDT formulates the relationship between the auto-spectral densities of two responses in the frequency domain. It can be used to identify shear connector conditions with or without reference data of the undamaged structure (or the baseline). Measured impact force and acceleration responses from hammer tests are analyzed to obtain the frequency response functions at sensor locations by experimental modal analysis. PSDT from the slab response to the girder response is derived with the obtained frequency response functions. PSDT vectors in the undamaged and damaged states can be compared to identify the damage of shear connectors. When the baseline is not available, as in most practical cases, PSDT vectors from the measured response at a reference sensor to those of the slab and girder in the damaged state can be used to detect the damage of shear connectors. Numerical and experimental studies on a concrete slab supported by two steel girders are conducted to investigate the accuracy and efficiency of the proposed approach. Identification results demonstrate that damages of shear connectors are identified accurately and efficiently with and without the baseline. The proposed method is also used to evaluate the conditions of shear connectors in a real composite bridge with in-field testing data.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1788-1795
• /
• 1992

본 연구에서는 상술한 특성을 갖는 유동자에 대하여 신뢰성이 보장된 스펙트 럼 추정법의 모색과 화립을 위해 의사 난류신호(turbulent-like signal)를 자기회기 모형(autoregressive model:AR model)으로 생성하고 추출간격이 유동장에 영향을 받는 비주기적 확률과정을 수치적으로 모사한다. 이 비주기적 실현 신호로 부터 현재 가 장 많이 사용되고 있는 Roberts와 Gaster의 직접 변화법과 추출 및 유지신호의 피리오 도그램(periodogram)법에 대해 데이터 밀도와 난류강도의 다양한 변화에 따른 속도편 의의 영향 등을 살펴보는데 목적을 둔다.