• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.25-25
• /
• 2023

As the demand for processing potatoes increases, imports of raw potatoes and potato products are increasing, so it is necessary to expand potato production as raw materials for processing in Korea. Potato varieties for processing that can be grown in fall have been developed, but research on cultivation technology and processing quality management technology to improve chip processing quality is very insufficient. Therefore, this study was conducted to investigate the optimal harvest time by investigating the quantity and chipping characteristics of potato chips during autumn cultivation. As the test varieties, the chip processing varieties "Saebong", "Eunsun", and "Geumnaru" were used, and the potato cultivation site was the Seocheon-gun Test field (214 Gaeya-ri) of the Chungcheongnam-do. The test treatment was at harvest time after spring cultivation, and the potatoes were harvested at 70, 80, 90, and 100 days after sowing based on the sowing time. The investigation items were potato productivity (total yield, yield of standard processing, and number of tubers) and chip-processing characteristics (chip color, dry matter content, glucose content, etc.). As a result of examining the yield characteristics according to the harvest time, statistical significance was not found according to the treatment. The total yield (ton/ha) was 27.5 to 30.5, and there was no significant difference depending on the time of 70 to 100 days after harvest. The standard quantity for processing (yield of 81-250g potatoes per unit) also showed a similar trend. In chipping characteristics according to harvest time, statistical significance was high in specific gravity and glucose content. The specific gravity was highest at 1.077 at 70 days after harvest, and the glucose (mg/dL) content was the lowest at 37.5 at 80 days after harvest. Statistical significance was not recognized, but chip color (L value) was the highest at 64.4 at 70 days after harvest. Therefore, it is judged that the optimal harvesting time for chip processing is 70 to 80 days after sowing.

• The Korean Journal of Mycology
• /
• v.25 no.4 s.83
• /
• pp.257-267
• /
• 1997

Fruit bodies similar to the Phellinus sp. residing on the mulberry were collected at Yang-yang in Kang-won-do province and one strain of Phellinus sp. was isolated from the fruit bodies. For mass production of the isolated mycelia in a submerged culture, the culture conditions, medium composition, and the effect of various culture systems on the mycelial growth, were investigated. The morphological characteristics of the fruit body were as follows: covered with blackish to black and rough, lower surface with yellowish-brown to dull-brown and smooth, 5-7 cm thick and hard woody. Also, the pure cultured mycelia showed yellowish-brown color, capability of purplish-brown pigment production on the PDA plate media, no-formation of clamp-connection, much binding branch, and enzyme activities such as laccase, tyrosinase and peroxidase. Therefore, pure cultured strain was identified to be Phellinus sp. In the flask culture, the optimum culture conditions for the mycelial production were obtained after cultivation of 8 days at inoculum level of 5%(v/v), media volume of 70 mL, 150 rpm, initial pH 6, and temperature of $30^{\circ}C$. Optimum medium composition from the response surface analysis were determined to be glucose 12.12 g/L, sucrose 12.12 g/L, yeast extract 11.15 g/L, malt extract 11.15 g/L, $KH_2PO_4$ 0.855 g/L and $CaCl_2$ 0.855 g/L. The production of the mycelia after 4 and 8 days of cultivation was 1.95 and 9.89 g/L, respectively. The maximum specific growth rate and productivity were $0.020\;hr^{-1}$ and 1.25 g/L/day, respectively. Among the three different culture systems for the growth of mycelia, the maximum mycelial dry weight of 7.5 g/L was obtained after cultivation of 4 days in the air-lift fermentor under aeration rate of 2.5 vvm. The maximum specific growth rate and productivity were $0.033\;hr^{-1}$ and 1.9 g/L/day, respectively, which were about 1.7 and 4.2 times higher than those of flask culture.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.739-752
• /
• 2006

Deep-sea surface sediments acquired by multiple corer from 69 stations in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were examined to understand the correlation of mass physical properties and sedimen-tological processes. The seabed of the middle part ($8-12^{\circ}N$) of the study area is mainly covered by biogenic siliceous sediment compared with pelagic red clays in the northern part ($16-17^{\circ}N$). In the southern part ($5-6^{\circ}N$), water depth is shallower than carbonate compensation depth (CCD). The mass physical properties such as grain size distribution, mean grain size, water content, specific grain density, wet bulk density, void ratio, and porosity of sediments are distinctly different among the three parts of the study area. Surface sediments in northern part are characterized by fine grain size and low water contents possibly due to low primary productivity and high detrital input. Conversely, sediments in the middle part are characterized by coarse grain size and high water contents, which might be caused by high surface productivity and deeper depth than CCD. The sediments show low water contents and high density in the southern part, which can be explained by shallower depth than CCD. Our results suggest that the variations in mass physical properties of sediments are influenced by combined effects including biogenic primary productivity of surface water, water depth, especially with respect to CCD, sedimentation rate, detrital input, and the geochemistry of the bottom water (for example, formation of authigenic clay minerals and dissolution of biogenic grains).

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.105-130
• /
• 2007

Recently, there is a substantial interest in implementing Business Process Management System(BPMS) among enterprises with the purpose of business process innovation. BPMS redesigns and coordinates business processes in terms of both automated steps and human involvement in order to maximize the value of both involved people and systems. The reason why BPMS is getting attention from top managers is that it has the possibility to optimize the business processes by cycling the process of modeling, execution, monitoring, evaluation, and redesigning work processes. Thus, it has created high expectations about not only productivity improvement but also business process innovation. However. having an innovative nature, which is used for process innovation, BPMS implementation has great potential to stir up employee resistance. The analysis and the discussion about the prevention of the resistance against IS(Information Systems) is important because IS change the way people work and also alter the power structure within the organization, in general. The purpose of this study is to investigate factors that have an impact on the effective adoption of BPMS at the enterprise level. To find out these factors, this study considers two characteristics of BPMS: First. BPMS shares some characteristics with other enterprise-wide IS such as ERP. Second, it has special BPMS-specific characteristics. Due to the lack of previous research on BPMS adoption, interviews were carried out with IT-consultants and CIOs who conducted BPMS projects previously to find out BPMS-specific features that would make BPMS unique when compared to other enterprise-wide IS. As a result, the monitoring function was chosen as the main BPMS-specific factor. Thus, this paper reviewed studies both on enterprise-wide IS adoptions, which applied Technology Acceptance Model (TAM) and secondly on computer based monitoring to find out factors that would influence the employees' perception on the monitoring function of BPMS. Based on the literature review, the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses, out factors that would impact the employees' perception on the monitoring function of BPMS. Based on the literature review the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses. The data analysis results showed that two among three monitoring function related factors - enterprise evaluation system and fairness of the boss - were significant. This implies that employees would worry less about the BPMS implementation as long as they perceive the monitoring results will be used fairly for their performance evaluation. However, employees' high self-efficacy on their job was not a significant factor in their perception of the usefulness of BPMS. This is related to cases that showed employees resisted against the information systems because they automated their works (Markus, 1983). One specific case was an electronic company, where the accounting department workers were requested to redefine their job because their working processes were automated due to BPMS implementation.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.220-229
• /
• 2009

Strain improvement and morphology investigation in bioreactor cultures were undertaken in suspended cultures of Phellinus linteus mycelia for mass production of protein-bound polysaccharides(soluble ${\beta}$-D-glucan), a powerful immuno-stimulating agent. Phellineus sp. screened for this research was identified as Phellinus linteues through ITS rDNA sequencing method and blast search, demonstrating 99.7% similarity to other Phellinus linteus strains. Intensive strain improvement program was carried out by obtaining large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because large numbers of protoplasts ($1{\times}10^5{\sim}10^6\;protoplasts/ml$) formed using the banding filtration method with the cell wall-disrupting enzymes could be regenerated in relatively high regeneration frequency($10^{-2}{\sim}10^{-3}$) in the newly developed regeneration medium. It was demonstrated that the strains showing high performances in the protoplast regeneration and solid growth medium were able to produce 5.8~6.4%(w/w) of ${\beta}$-D-glucan and 13~15 g/L of biomass in stable manners in suspended shake-flask cultures of P. linteus mycelia. In addition, cell mass increase was observed to be the most important in order to enhance ${\beta}$-D-glucan productivity during the course of strain improvement program, since the amount of ${\beta}$-D-glucan extracted from the cell wall of P. linteus mycelia was almost constant on the unit biomass basis. Therefore we fully investigated the fungal cell morphology, generally known as one of the key factors affecting cell growth extent in the bioreactor cultures of mycelial fungal cells. It was found that, in order to obtain as high cell mass as possible in the final production bioreactor cultures, the producing cells should be proliferated in condensed filamentous forms in the growth cultures, and optimum amounts of these filamentous cells should be transferred as active inoculums to the production bioreactor. In this case, ideal morphologies consisting of compacted pellets less than 0.5mm in diameter were successfully induced in the production cultures, resulting in shorter period of lag phase, 1.5 fold higher specific cell growth rate and 3.3 fold increase in the final biomass production as compared to the parallel bioreactor cultures of different morphological forms. It was concluded that not only the high-yielding but also the good morphological characteristics led to the significantly higher biomass production and ${\beta}$-D-glucan productivity in the final production cultures.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2015

As information technology fusion is accelerated, the researches to improve the quality and productivity of crops inside a plant factory actively progress. Advanced growth environment management technology that can provide thermal environment and air flow suited to the growth of crops and considering the characteristics inside a facility is necessary to maximize productivity inside a plant factory. Currently running plant factories are designed to rely on experience or personal judgment; hence, design and operation technology specific to plant factories are not established, inherently producing problems such as uneven crop production due to the deviation of temperature and air flow and additional increases in energy consumption after prolonged cultivation. The optimization process has to be set up in advance for the arrangement of air flow devices and operation technology using computational fluid dynamics (CFD) during the design stage of a facility for plant factories to resolve the problems. In this study, the optimum arrangement and air flow of air circulation fans were investigated to save energy while minimizing temperature deviation at each point inside a plant factory using CFD. The condition for simulation was categorized into a total of 12 types according to installation location, quantity, and air flow changes in air circulation fans. Also, the variables of boundary conditions for simulation were set in the same level. The analysis results for each case showed that an average temperature of 296.33K matching with a set temperature and average air flow velocity of 0.51m/s suiting plant growth were well-maintained under Case 4 condition wherein two sets of air circulation fans were installed at the upper part of plant cultivation beds. Further, control of air circulation fan set under Case D yielded the most excellent results from Case D-3 conditions wherein air velocity at the outlet was adjusted to 2.9m/s.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.85-100
• /
• 2008

The United States Department of Agriculture (USDA) funded collaborative project on The Economic Feasibility Analysis of Crop Cultivation Practice Project in Pirganj and Kurigram Districts in Bangladesh will started during 2008-2012, for 4 years with total project cost of US$ 571,270. The project will be implemented in 6 villages; has 1,097 hectares areas which is divided into 948 hectares of agricultural land, 52 hectares of forest land and 345 hectares of other land, covered 1,059 households equal to 5,305 persons in Pirganj and Kurigram districts The project has proposed to be implemented in joint collaboration by Bangladesh Agricultural Research Council (BARC), Bangladesh Agricultural Research Institute (BARI) and Rangpur Dinajpur Rural Service (RDRS) Bangladesh with full participation of the farmers' groups of respective project site. The specific objectives of the project are: (1) to estimate the productivity of paddy, wheat, maize, tobacco and sugarcane (2) to determine the cost of production and returns to the above mentioned crops (3) to study the interrelationship between inputs and output of the above mentioned crops and (4) to examine the resource utilization patterns at farm level. In this project analysis, the net incremental profit is US$33,028. The expected incremental project benefit and incremented production cost are estimated as US$ 219,959 and US$ 186,931 respectively. The financial decision making criteria would be followed in this crop cultivation practice project. After the project implementation, the expected project benefits are assumed to be continued for 15 years. The benefit cost ratio (B/C) of the project is estimated at 1.077 (table 11) when using discount rate of 10% as an opportunity cost of capital in Bangladesh. FIRR of project is estimated at 26.15% which is bigger than the opportunity cost by more than double. So this project is financially feasible and acceptable. Therefore, this project should be extended to other areas to increase the farm income and economic growth of marginal poor farmers in Bangladesh.

• Journal of Animal Environmental Science
• /
• v.15 no.2
• /
• pp.171-182
• /
• 2009

Conventionally, many pig producers have utilized a continual sow managements system that the matings, farrowings and weanings are done weekly basis. But this transitional method is not able to cut the cycle of diseases and fully apply all-in/all-out system because of the continuous flow of sows and pigs. Conventional weekly management system is currently limiting in small farm to work efficiently both for workers and pigs. Therefore, pig producers have found novel management methods for applying all-in/all-out system, improving pig health, leading to better growth, lowering mortality and reducing medication costs nowadays. Moreover, all-in/all-out pig management system has known as a strategy for improving productivity in swine farm. The batch system is one of the best management methods to adopt all-in/all-out pig management system that prevent spreading diseases in pig and remove cycle of diseases. Batch farrowing system is a concept for providing a group of sows that delivery within a specific farrowing interval and inducing a large enough scale of piglets to fill the weaner facilities. There are different types of batch farrowing system with batch size and interval of farrowing when several factors at the swine farm are considered such as total number of sows, available facilities in the farm, and the efficiency of workforce. Sow managements such as farrowing, weaning and breeding, every 3 weeks rather than weekly, 2 or 5-week interval have advantages for workers and reproductive cycle of sows as well as pig flow. Because there are several pros and cons both in weekly and batch management system, various factors should be considered to apply the most suitable management system in each individual farm. To improve poor swine productivity in Korea compared to ED, batch system for sows will be an alternative choice which is able to prevent high incidence of diseases in swine farm such as PMWS, PRRS, PRDC and PED because all-in/all-out pig management can be also applied automatically by using this management system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.4
• /
• pp.258-267
• /
• 2020

The agrivoltaic can produce electricity and grow crops on fields at the same time. It is necessary to analyze the cultivation environment and evaluate the crop productivity under agrivoltaic because the shading point changes according to structure of agrivoltaic and sun's position. Two types of "fixing" and "tracing" agrivoltaic were installed, and a rice cultivation experiment was conducted in the fields under each agrivoltaic and without shading (control). "Hyunpoombyeo" was transplanted on June 7, 2019, and grown with fertilization of 9.0-4.5-5.7 kg/10a (N-P-K). Fifteen weather stations were installed under each agrivoltaic to measure solar radiation and temperature, and yield and yield-related elements were investigated by points. The accumulated solar radiation during the rice growing season in fixing was no much difference between points, and that in tracing was much difference between points. However, the average solar radiations of two agrivoltaics were similar. The mean temperature, yield, and yield-related elements showed a significant difference for the shading rate, and decreased with increasing the shading rate except ripening grain rate and 1000 grain weight of fixing agrivoltaic. In the relationship between shading rate and yield, fixing and tracing were fitted to a logistic equation and a simple linear equation, respectively, and showed a high correlation (tracing: R2 = 0.62, fixing: R2 = 0.73). The shading rate variation by point for two types was large despite similar yield variation. Thus, it needs to be more closely examined the relationship of the shading rate for a specific period rather than the shading rate during the whole growing season.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.189-197
• /
• 2022

This study was conducted to compare the egg productivity, egg quality, and blood characteristics of laying hens with different laying rates, and the frequency and cumulative duration of the sitting behavior observed before laying was investigated. Twelve 45-week-old Hy-Line Brown laying hens were randomly assigned to two treatment groups with three replicates. Treatment groups were classified as layers laying over 80%(high egg performance layers; HEP) and layers laying below 50%(poor egg performance layers; PEP). The experiment lasted 4 weeks. HEP showed higher hen-house egg production ratio and egg mass and lower feed conversion ratio(FCR) (P<0.05) compared with PEP, although egg weight was higher in PEP (P<0.05). In terms of egg quality, PEP showed differences in eggshell quality (eggshell color, eggshell thickness, and eggshell weight) (P<0.05). Additionally, HEP showed high triglycerides(TG), and PEP showed high alanine transaminase(ALT) level (P<0.05) in serum collected in the morning. In the afternoon, the HEP showed higher lactate dehydrogenase(LDH) levels (P<0.05). No differences in the Ca: P ratio were observed between layers with different laying rates. One hour before egg laying, HEP exhibited sitting behavior 4 times on average, each lasting 25 minutes. In conclusion, egg production and quality differ between HEP and PEP, and HEP showed frequent sitting behavior before egg laying. However, additional research is necessary to explore approaches other than specific behavioral observation to distinguish poor layers in the flock for application in farms.