• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1114-1121
• /
• 2016

This study investigated the food components and antioxidant activities of dried Jerusalem artichoke (Helianthus tuberosus L.) with white and purple colors. For the proximate composition of dried Jerusalem artichoke, regardless of color, carbohydrate content was highest, followed by crude protein, ash, and moisture contents, and breed-specific differences were not detected. The highest mineral content of dried Jerusalem artichoke was potassium, followed by calcium, magnesium, sodium, and iron. The major minerals of white color sample were calcium, magnesium, and zinc, whereas those of the purple color sample were potassium, sodium, copper, and manganese, and no significant differences between the samples were detected. The main amino acid of dried Jerusalem artichoke was arginine, regardless of color, followed by asparagine, aspartic acid, and ${\gamma}-amino-n-butyric$ acid in order. Cysteine, leucine, and tyrosine were significantly (P<0.05) more abundant in the purple color sample than in the white color sample. In contrast, phosphoethanolamine was significantly (P<0.05) higher in the white color sample than in the purple color sample. Antioxidant activity was higher in the purple color sample than in the white color sample for all activities except the 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assay methodology. Ferric-reducing antioxidant power and oxygen radical absorbance capacity assays at low concentrations of extracts found no differences between the two samples, although the purple sample at high concentration showed relatively high antioxidant activities.

• The Korean Nurse
• /
• v.31 no.5
• /
• pp.39-52
• /
• 1992

As society has changed, the demand for improved health care has increased. To keep up with this type of social need, professional nursing care is seeking to efficiently satisfy the care needs of human beings. The goal of clinical nurse is to meet nursing care needs of patients. This study was designed to survey attitudes of nursing profession of clinical nurses. The following specific 5 objectives were investigated and the attitudes of clinical nurses were determined. 1. The social position of nursing as a profession. 2. Factors influencing the development of nursing. 3. The future of nursing. 4. Their work. 5. Job satisfaction. The subjects consisted of 120 nurses who are working at 5 general hospital over 150 beds Ill CHONG NAM. The nurses were surveyed by means of a questionnaire from May 24 to Jun 15, 1992. The tool used for this study was based on earlier work by Lee, Nam Hi(1978) and Kim, Myong Hee(1984). Computer was used for Data Analysis. Frequency and Percentage were used to examine the genera] characteristics of the subjects. ANOV A and t.test were used to test the relation in characteristics of the subjects and attitudes Loward nursing prfession. The finding of this study were as follows; 1. Social position of nursing as a profession; The response with the highest agreement was "The professional nursing organization is less power. ful than the other professional organization" 3.333 points, and the response with the lowest agreement was "Nursing get a big salary" 2.225 points. 2. Factors influencing the development of nursing; the response with the highest agreement was "Hospital environment should be improved" 4.267 points, and the response with the lowest agreement was "Nurses satisfaction with salary"2.175 points. 3. The future of nursing; the response with the highest agreement was "Along the deveiopmem of science technique will be elevated educational state and graduate to needed in nursing" 3.958 points, and showed generally positive response toward the future of nursing. 4. Their work; the response with the highest agreement was "Work loading due to nursing staff insufficient" 4. 308 points, the response with the lowest agreement was "Nurses are unkind to patient" 2.508 points. 5. The subject's view regarding job satisfaction;it showed that "Interpersonal nursing staffs" 3.508 points, showed generally unsatisfactory response toward job satisfaction. 6. The relationship between the subject's attitudes toward professional nursing and general characteristics showed a significant difference statistically in regard to the field of work(P<.05). 7. The relationship between general characteristics and the subject's attitudes toward factors influencing the development of nursing showed a significant difference statistically in regard to the age and the status of position(P<.05). The subject's attitude toward the future of nursing showed a significant difference statistically in regard to the age and the period of nursing career and the field of work(P<.05, P<.005). The subject's attitude toward the job satisfaction showed a significant difference statistically in regard to the age and the period of nursing career and the status of position and the field of work(P<.005).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.2
• /
• pp.99-110
• /
• 2001

A gem-quality yttria-stabilized zirconium oxide crystals were synthesized by the skull-melting method, using the RF electrical apparatus. Principal raw materials used were $ZrO_2$and 25 wt.% $Y_2O_3$as stabilizer and 0.03~0.05 wt.% $Nd_2O_3$decolorizing agent were added to it. The single crystals were approximately 20$\times$63 mm in size with chemical composition $Zr_{0.73}$ $Y_{0.27}$ $O_{1.87}$ . The crystals are isotropic with no appreciable anisotropism under a polarizing microscope. Their refractive indices are in the range of 2.15~2.18, specific gravity 5.85, Mohs' hardness 8~8.5, and reflectivity 13.47%. The zirconia crystals were confirmed to have cubic structure with Face-centered lattice(Z=4), space group Fm3m ($CaF_2$-type structure) and unit cell parameters are a=5.157 $\AA$. The optimal growing conditions for yttria-stabilized zirconia are 50 kW, 2.94 MHz in power and to use a crucible with 105 mm $\times$ 135 mm in size. When the lowering speed of the crucible was set 16mm/hr gave the best yield, 42%. Since the refractive index(2.15~2.18) of cubic zirconia is smaller than that of diamond, the angle between crown and pavilion should be fashioned to make it smaller than $40.5^{\circ}$ to show the maximum brilliancy and fire.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.36-44
• /
• 2002

The waste garnet powder as a raw material for clay bricks was studied its recycling. The physical strength of clay bricks are closely dependent both on the contents of $SiO_2$, $Al_2$$O_3$, and $Fe_2$$O_3$in clay and on the viscosity of it. Although the garnet power has very high contents of $SiO_2$, $Al_2$$O_3$, and $Fe_2$$O_3$, it could not substituted to clay because of its low viscosity. Therefore the substitution of sand with waste garnet powder was considered to influence positively on the strength of clay bricks .Mixing ratios of {clay-sand}, {sand-garnet powder}, and {clay-sand-garnet powder} based on weight were controlled in the production of clay bricks. The properties of clay bricks such as compression strength, moisture absorption, shrinkage, and specific gravity has been evaluated. It was shown that the optimal mixing combination was found to be { clay(50%)-sand(30%)-garnet powder(20%)} as a weight basis. The present study indicated possibilities to produce commercially clay bricks with the waste garnet powder. An economical benefit will be produced in viable in view of recycling waste garnet powder.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.137-143
• /
• 2016

The sedimentary environment and sediment were surveyed at the West-Northern site of Chagwi-do nearby Jeju Island for the design of the embedded suction anchor system of 10 MW-class floating wave-offshore wind hybrid power generation system. According to the classification scheme of Chough et al.[2002], the echo type of the seismic profiles using the chirp III was classified. As a results, the center and west-northern area of survey site were proved to be type I-3 where subbottom layer with thickness 5~15 m exists under the flat seafloor. On the other hands, the east-southern area were regarded to be type I-1, I-2 and III-1 where seafloor reflection is much stronger than type I-3. Also, the physical tests (unit weight, moisture content, grain size, liquid limit, specific gravity) were performed with samples taken from 8 fixed locations. It is found that the sand (SP), the sand blended with silt (SM) and the mixture of SP-SM are distributed uniformly on the survey area.

• Journal of Veterinary Clinics
• /
• v.30 no.4
• /
• pp.258-263
• /
• 2013

The primary goal of this study was to compute sample sizes required to achieve the each aim of a variety of foot-and-mouth disease (FMD) surveillance programs, using a statistically valid technique that takes the following factors into account: sensitivity (Se) and specificity (Sp) of diagnostic test system, desired minimum detectable prevalence, precision, population size, and desired power of the survey. In addition, sample sizes to detect FMD if the disease is present and also as proof of freedom were computed. The current FMD active surveillance programs consist of clinical, virological, and serological surveillance. For the 2012 serological surveillance, annual sample sizes (n = 265,065) are planned at four separate levels: statistical (n = 60,884) and targeted (n = 115,232) at breeding pig farms and slaughter house, in together with the detection of structural proteins (SP) antibodies against FMD (n = 88,949). Overall, the sample size was not designed taking the specific aims of each surveillance stream into account. The sample sizes for statistical surveillance, assuming stratified two-stage sampling technique, was based to detect at least one FMD-infected case in the general population. The resulting sample size can be used to obtain evidence of freedom from FMD infection, not for detecting animals that have antibodies against FMD virus non-structural proteins (NSP). Additionally, sample sizes for targeted surveillance were not aimed for the population at risk, and also without consideration of statistical point of view. To at least the author's knowledge, sampling plan for targeted, breeding pig farms and slaughter house is not necessary and need to be included in the part of statistical surveillance. Assuming design prevalence of 10% in an infinite population, a total of 29 animals are required to detect at least one positive with probability of 95%, using perfect diagnostic test system (Se = Sp = 100%). A total of 57,211 animals needed to be sampled to give 95% confidence of estimating SP prevalence of 80% at the individual animal-level with a precision of ${\pm}5%$, assuming 800 herds with an average 200 heads per farm, within-farm variance of 0.2, between-farm variance of 0.05, cost ratio of 100:1 of farm against animals. Furthermore, 779,736 animals were required to demonstrate FMD freedom, and the sample size can further be reduced depending on the parameters assumed.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.151-159
• /
• 2008

Performances of retroreflectivity vary place to place, according to traffic volumes and time lengths after striping, depending on pavement marking materials and colors. The present paper uses the nation wide data of retroreflectivity, which has been collected from freeways and then tries to develop the regression curve setting traffic volume and service life as independent variables and retroreflectivities as dependent variables. The DB system includes two year's measurement in $2005{\sim}2006$ over Korean freeway pavement marking at an interval of three months for the period. The mobile measurement system, a laserlux, was employed for the purpose. The DB has provided a lot of information about materials and performance of the specific pavement marking such as geometric features, traffic volumes, material characteristics and the installation date. This study provides the comparison of pavement marking performances under diversified conditions. Based on accumulated pavement marking performances, this study provides performance curves based on the diversified factors. The goal of the retroreflectivity modeling is to develop equations that can be used to estimate an average retroreflectivity of pavement markings as a function time since application and traffic volume. After representing the variation of retroreflectivities and estimating regression curves by linear, exponential, logarithmic and power function, the regression curve which had the highest coefficient of determination and the value similar to the last field measurement was regarded as the retroreflectivity decay model. As a result of verification, the decay model showed the signification within the 90% confidence level and especially showed the clear relation with field data according to increase of cumulative vehicle exposure. Accordingly, these models can be used to determine service lives, retroreflectivity degradation rates, and retroreflectivity of new markings.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.3
• /
• pp.504-511
• /
• 2010

Diabetes is a disease that contains a high concentration of glucose in blood and due to defects in either insulin secretion or insulin action. Although the distinctive causes and factors of diabetes have not been clarified, the genetic factors are suggested as a main susceptibility until now. SNP (Single Nucleotide Polymorphism), as the most common genetic variation, has an influence on personal susceptibility for diseases. A nonsynonymous SNP, which changes the amino acid of the protein and its function, is especially important. Therefore, this study hypothesized that there are associations between specific SNPs of the targeted genes. Transcription factor 7-like 2 (TCF7L2) and fat mass and obesity associated (FTO) genes were selected as target genes from the results of genome-wide association and other related research studies. Second, four nonsynonymous SNPs (three in TCF7L2 and one in FTO gene) were selected as target SNPs by using public database of NCBI (National Center for Biotechnology Information). The recruited personnel was classified into three subgroups of diabetes, impaired fasting glucose (IFG) and normal groups. The individual genotypes of each group were analyzed by resequencing. None of genetic variations at four targeted SNP sites was revealed in all samples of this study. However, this study found two new SNPs that were not reported in TCF7L2 gene. One is synonymous SNP, which is heterozygous of C/T and no amino acid change of asparagine/asparagines, was located at c1641 and found in one normal person. Another is nonsynonymous SNP, which is heterozygous of G/A, was located at c1501 and found in two samples. This new discovered nonsynonymous SNP induce the amino acid change from alanine to threonine. Moreover, this new nonsynonymous SNP was found among two persons, one of whom was a diabetes patient and the other one was a person at boundary between IFG and normal, suggesting that this variant might be associated with IFG or diabetes. Even if there is a limitation of sample number for statistical power, this study has an importance due to the discovery of new SNPs. In the future study, a large sample number of diabetes cohort will be needed to investigate the frequency and association with new discovered SNP.