• Journal of Arbitration Studies
• /
• v.16 no.3
• /
• pp.53-89
• /
• 2006

At its thirty-second session(Vienna, 17 May-4 June 1999), the UNCITRAL decided that the priority items for the Working Group(Arbitration and Conciliation) should include enforceability of interim measures and the requirement of written (on for the arbitration agreement. The Working Group, at its forty-third session(Vienna, 3-7 October 2005), it had undertaken a detailed review of the text of the revised article 17 of UNCTTRAL Model Law on International Commercial Arbitration, and it had resumed discussions on a draft model legislative provision revising article 7, paragraph (2) of UNCITRAL Model Law. The purpose of this paper is to make research on the contents and issues of the draft legislative provisions on interim measures and preliminary orders, and on the form of arbitration agreement which the Working Group discussed and adopted at its forth-fourth session(New York, 23-27 January 2006). The draft legislative provisions on interim measures and preliminary orders are composed of the following provisions : Article 17-power of arbitral tribunal to order interim measures; article 17 bis-conditions for granting interim measures; article 17 ter-applications for preliminary orders and conditions for granting preliminary orders; article 17 quater-specific regime for preliminary orders; article 17 quinquies- modification, suspension, termination; article 17 sexies-provision of security; article 17 septies-disclosure; article 17 octies-costs and damages; article 17 novies recognition and enforcements; article 17 decies-grounds for refusing recognition or enforcement; article 17 undecies-court-ordered interim measures. There are the following issues in the draft legislative provisions on interim measures and preliminary orders : form of issuance of an interim measures in article 17(2); conditions for granting interim measures in article 17 bis; purpose, function and legal regime of preliminary orders in article 17 ter; obligation of arbitral tribunal to give notice, and non-enforceability of preliminary orders in article 17 quater; burden of proof, interplay between article 17 decies and article 34, and decision on the recognition and enforcement of the interim measures in article 17 decies; placement of article 17 undecies; amendment of scope exception of application in article 1(2). The draft legislative provisions on the form of arbitration agreement are composed of the following provisions : article 7(1) definition of arbitration agreement; article 7(2) arbitration agreement in writing; article 7(3) arbitration agreement if its terms(content) are (is) recorded in any form; article 7(4) arbitration agreement by an electronic communication; article 7(5) arbitration agreement in an exchange of statements of claim and defence; article 7(6) reference to any document containing an arbitration clause. There are the following issues in the draft legislative provisions on the form of arbitration agreement : arbitration agreement in writing in article 7(2); terms or contents of arbitration agreement in article 7(3); arbitration agreement by electronic communication in article 7(4); existence of arbitration agreement in article 7(5); reference to any document containing an arbitration clause in article 7(6); the alternative proposal on article 7; amendment to article 35(2).

• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1441-1446
• /
• 2007

This study was conducted to establish the individual identification system and to estimate the genetic characteristic of Jeju native horse (JNH) using 13 microsatellite markers located on different horse autosomes. The markers were genotyped on 191 animals from five horse breeds including Jeju native horse (JNH). In total, 138 alleles were detected from the genotypes of 13 microsatellite markers. The average heterozygosities ranged from 0.317 to 0.902 and the polymorphic information content (PIC) ranged from 0.498 to 0.799 in JNH. We found that there were significant differences in allele frequencies in JNH when compared with other horse breeds. In ATH4 marker, there were specific allele frequence pattern that some of allele only found in JNH, Mongolian horse (MONG) and Jeju racing horse (JRH). The calculated cumulative power of discrimination (CPD) was 99.9% when nine microsatellite loci were used for analysis in the individual identification system. Also, the matching probability that two unrelated animals would show the same genotypes, was estimated to be $0.60{\times}10^{-10}$. Therefore, in the nine markers used in this study can be used for individual identification in the Jeju native horse population.

• Journal of Families and Better Life
• /
• v.2 no.1
• /
• pp.131-150
• /
• 1984

The purpose of this study is to explore the family as an interaction system, concentrating on the mutual influences between communication and family development; (1) how Communication patterns affect family relationships, and (2) how relationships among family members affect communication. In order to do this Galvin, Brommel used the following frame work; family is a system in which communication regulates cohesion and adaptability by a flow of message patterns through a defined network of evolving interdependent relationships. A family system consists of members, the relationships among them, the family attributes, the members attributes and an environment in which family functions. Within the framework of common cultural communication patterns, each family has the capacity to develop its own communication code based on the experiences of individual members and the collective family experience. Most of us develop our communication skills within the family context learning both the general cultural language and the specific familial communication code. Communication may be viewed as a symbolic, transactional process as the process of creating and sharing meanings. To say that communication is a process implies a continuous interaction of an indefinite large numbers of variables with a concomitant,. continuous change in the values taken by these variables. Finally the process implies change, Family functions include the primary functions of cohesion and adaptability, and supporting functions of family images, themes, boundaries, and biosocial issues. The primary functions reveal concepts integrated family interaction and supporting function, along with those of cohesion and adaptability, give shape to family life. the characteristics of developed relationships of richness, uniqueness efficiency, substitutability, pacing , openness spontaneity, and evaluation are reflected in the verbal and nonverbal behaviors with which family members negotiated a set of common meanings and develop thier own unique message system. The message system is the major element of communication process and influences both the form and the content of thier relationship and in create and share meanings. Family systems need to provide order and predictability for thier members, specifically focusing on communication rules and the networks by which messages are transmitted. Most rules emerge as a result of multiful interactions. There are basic rules and rules about rules, or metarules. Perceiving the rules of family system is very difficult because often family members don't think about the basic rules, much less the metarules. Breaking the rule may result in the creation of a new set because the system may recalibrate itself to accept more variety of behavior. Families develop communication networks to deal with the general issue. Family adaptability may be seen through the degree of flexibility in forming and reforming networks and networks become a vital part of the decision- making process and relate to the power dynamics operating within the family. Networks also play an integral part in maintaining the roles and rules operating with the family system. Thus networks and rules have mutual influence. The family -of -origin issues influence all aspects of family communication and account for many of the communication patterns, rules and networks and the role of the family -of-origin influences as a primary force for communication on behavior of newly forming systems. Each family system develops its own communication meanings. There is not one right way to communicate within a family but may be indefinitly large change of family life and communication behavior. Study on functional family communication helps to gain a better understanding of dynamics of family communication and ability of a new insight into the family.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.499-503
• /
• 2008

The bioethanol for use as a liquid fuel by fermentation of renewable biomass as an alternative to petroleum is important from the viewpoint of global environmental protection. Recently, many scientists have attempted to increase the productivity of bioethanol process by developing specific microorganism as well as optimizing the process conditions. In the present study, which is based on our previous investigation on the pretreatment process, theproductivity of bioethanol obtained from simultaneous saccharification and fermentation (SSF) process was compared between various domestic materials including barley, brown rice, corn and sweet potato. Additionally, Solid glucoamylase (SGA; developed in Changhae Co.), from modified strain with UV, was used. The result was compared to commercial glucoamylase (GA). It was observed that the fermentation rate was increased together with the yield which can be derived from the final ethanol concentration. Especially, in the case of brown rice, compared to the experimental results using GA, the final ethanol concentration was 1.25 times higher and 18.4 g/L of the yield was increased. Also, the time required for reaching 95% of the maximum ethanol concentration is significantly reduced, which is approximately 36 hours, compared to 88 hours using GA. It means that SGA has excellent saccharogenic power.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.67-76
• /
• 2006

For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3 m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3km upstream of the powerhouse and headrace tunnel of 20km in length and penstock of 440m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflowraised the water level inside tunnel to 70cm, 17% of tunnel diameter (3.9m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made forthe excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

• The Journal of the Korean dental association
• /
• v.53 no.4
• /
• pp.266-274
• /
• 2015

The price for health service are decided by very complicated process because many of factors are related with them. The RBRVS(resource-based relative value scale) were used to calculate the Korean health service fees including dental fees. This study aimed to compare dental fees of Korea with other countries, such as Japan, Germany, and the US for evaluating the adequacy. Dental fees were categorized as oral evaluation and imaging, dental treatment including restorative, periodontal, and surgical work, and preventive treatment and compared by each country. The official documents about dental fees were collected from Korea, Japan, Germany, and the US. Each fee was presented as their own currency at first. Then they were converted into Korean won (KRW) by applying the market exchange rates at a specific point of time. Finally the fees were adjusted by purchasing power parities (PPPs) which equalize the different currencies. In general, the level of Korean fees were markedly low compared to those of Japan, Germany, and the US. German fees were similar or higher than that of Japan, and the US. The Korean fees were lower than three other countries 1.2~4.1 times for oral evaluation and 2.2~7.3 times lower for panoramic radiography. The endodontic fees of Japan, Germany, and the US were higher 1.8~15.3 times and 4.0~35.9 times for the deciduous teeth extraction compared to the Korean. In Japan the prophylaxis was 3.2 times more priced than the Korean fee. Exceptionally, the fees for re-evaluation, amalgam filling, and scaling were lower priced in Japan than other countries. This study has limitations on the items in definition and contents of dental practices units which were not exactly comparable and differently determined by countries. However, this study is meaningful because it surveyed the price levels to compare four different countries and then applied PPPs adjustment. This finding can be used to develop the dental RBRVs of Korean national health insurance and will contribute to improving the payment systems of health care.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.611-615
• /
• 2004

A neural prostheses can be designed to permit stimulation of specific sites in the nervous system to restore their functions, lost due to disease or trauma. This study focuses on the feasibility of optoelecronic stimulation into nervous system. Optoelectronic stimulation supplies, power and signal into the implanted optical detector inside the body by optics. It can be effective strategy especially on the retinal prosthesis, because it enables the non-invasive connection between the external source and internal detector through natural optical window 'eye'. Therefore, we designed an effective neural stimulating setup by optically based stimulation. Stimulating on the sciatic nerve of a rat with proper depth probe through optical stimulation needs higher ratio of current spreading through the neural surface, because of high impedance of neural interface. To increase the insertion current spreading into the neuron, we used a parallel low resistance compared to load resistance organic interface and calculated the optimized outer parallel resistance for maximum insertion current with the assumption of limited current by photodiode. Optimized outer parallel resistance was at a range of 500Ω-700Ω and a current was at a level between 580uA and 650uA. Stimulating current efficiency from initial photodiode induced current was between 47.5 and 59.7%. Various amplitude and frequency of the optical stimulation on the sciatic nerve showed the reliable visual tremble, and the action potential was also recorded near the stimulating area. These result demonstrate that optoelectronic stimulation with no bias can be applied to the retinal prosthesis and other neuroprosthetic area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.271-279
• /
• 2014

In this paper, the two design techniques of the embedded system which provides a wireless image observation with temporary ad-hoc network are proposed and developed. The first method is based on the embedded system design technique for a nearly real-time wireless short observation application, having a specific remote monitoring node with a built-in image processing function, and having the maximum rate of 1 fps (frame per second) wireless image transmission capability of a $160{\times}128$size image. The second technique uses the embedded system for a general wireless long observation application, consisting of the main node, the remote monitoring node, and the system controller with built-in image processing function, and the capability of the wireless image transmission rate of 1/3 fps. The proposed system uses the wireless ad-hoc network which is widely accepted as a short range, low power, and bidirectional digital communication, the hardware are consisted of the general developed modules, a small digital camera, and a PC, and the embedded software based upon the Zigbee stack and the user interface software are developed and tested on the implemented module. The wireless environment analysis and the performance results are presented.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.80-88
• /
• 2017

Globally, there has been a lot of research related to recycling coal ash from power plant stations. This research is happening because there is a considerable shortage of sites for reclamation of increased coal ash every year. In addition, a variety of environmental pollutants have appeared because of mining activity. Abandoned coal mine, pits, and mine tailing piles caused pollutants to come to the surface resulting in serious damage for humans and the environment. Therefore in this study, we investigated whether or not coal ashes have the ability to prevent several environmental problems by mining in Korea and a manageable form recycling coal ashes. In overseas countries, there is a sufficient field of applicable cases where coal ash is used for neutralizing AMD (Acid Mine Drainage), covering of the waste materials, grouting, and soil amendments. However in Korea, since the coal ash is classified as a 'waste', there is an insufficient field applicable cases so far. Therefore it is necessary to establish a specific standard and management system for the utilization of coal ash based on the relevant precedent cases applied abroad in order to prevent environmental pollution caused by mining activity in Korea.