• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권1호
• /
• pp.107-112
• /
• 2004

The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.379-382
• /
• 2003

공사시 콘크리트는 온도와 습도 등 알맞은 환경을 유지해야만 제 강도를 발휘할 수 있으나 주변환경은 일정하지 않고 많은 변수를 내포하고 있다. 더욱이 우리나라는 겨울철과 여름철의 온도차이가 심한 지역으로 특히나 기후적 요소가 변수에 많은 부분을 차지하고 있다. 여름철은 콘크리트 공사시 그다지 어려움이 없지만 겨울철에는 $-4^{\circ}C$이하로 내려가는 등 기후환경으로 인한 공사 저해요인으로 공사 진행에 차질이 생긴다. 그러나 공사는 계획된 공정대로 진행되어져야 한다. 그러므로 동절기 콘크리트 공사는 기후적 변수등의 저해요인을 특별관리를 하여 품질확보에 만전을 기해야 한다. 무엇보다 콘크리트 타설 후 소요기간까지 경화에 필요한 온도, 습도조절을 유지하며, 유해한 작용의 영향을 받지 않도록 충분히 양생하여야 쟤 강도를 발휘하는 만큼 양생과정은 중요하다. 그러면 양생방법은 환경조건 둥 각각의 상황에 따라 정해지는데, 본 논문에서는 현장에서 이루어지는 양생과정의 분석을 통해 양생법에 대해 고찰해보고 문제점을 예상하여 개선방안을 제시 하고자 한다.

• Journal of Animal Science and Technology
• /
• 제58권5호
• /
• pp.20.1-20.11
• /
• 2016

The present review has mainly focused on the specific parameters including aging (aging days, temperature, relative humidity, and air flow), eating quality (flavor, tenderness and juiciness), microbiological quality and economic (shrinkage, retail yields and cost) involved beef dry aging process. Dry aging is the process where beef carcasses or primal cuts are hanged and aged for 28 to 55 d under controlling environment conditions in a refrigerated room with $0^{\circ}$ to $4^{\circ}C$ and with relative humidity of 75 to 80 %. However there are various opinions on dry aging procedures and purveyors of such products are passionate about their programs. Recently, there has been an increased interest in dry aging process by a wider array of purveyors and retailers in the many countries. Dry aging process is very costly because of high aging shrinkage (6 to 15 %), trims loss (3 to 24 %), risk of contamination and the requirement of highest grades meat with. The packaging in highly moisture-permeable bag may positively impact on safety, quality and shelf stability of dry aged beef. The key effect of dry aging is the concentration of the flavor that can only be described as "dry-aged beef". But the contribution of flavor compounds of proteolysis and lipolysis to the cooked dry aged beef flavor is not fully known. Also there are limited scientific studies of aging parameters on the quality and palatability of dry aged beef.

• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1289-1295
• /
• 2008

최근에 다양한 유비쿼터스 서비스는 Push와 Pull 서비스 형태로 제공되고 있으며, 이와 같은 Pull/push 서비스를 제공하기 위한 OpenAPI(Application Program Interface)에 대한 연구가 진행되고 있다. 하지만 아직 Push와 Pull 서비스와 이를 지원하기 위한 OpenAPI에 대한 연구가 아직 미비하다. 이에 본 논문에서는 Pull 서비스와 Push 서비스를 이용하여 센서 네트워크 기반의 응용 인터페이스를 제공하는 Push 서비스와 Pull 서비스 모델을 제시하고, Push 서비스와 Pull 서비스를 제공하는 OpenAPI를 설계하고 구현한다. 이를 위하여 웹 서비스 기반의 Pull 서비스 구조를 제시하고, .Net 프레임워크 기반의 원격 서비스(Remote Service)를 이용하여 센서 네트워크에 수집된 온도, 습도 등의 상황 데이터를 Pull 서비스 형태로 제공하는 OpenAPI를 설계하고 구현한다. 더불어 TCP/IP 소켓 인터페이스를 이용한 Push 서비스 구조를 제안하고, 이 서비스를 제공하는 OpenAPI를 설계하고 구현한다. 이를 통해서 기존의 특정 데이터베이스 중심의 센서 네트워크의 폐쇄적인 응용 인터페이스를 개방적인 표준 인터페이스로 전환하여 사용자가 여러 곳에 널려 있는 많은 상황 데이터를 쉽게 접근하여 확인할 것으로 기대한다.

• 한국산림과학회지
• /
• 제77권2호
• /
• pp.216-222
• /
• 1988

춘천근교(春川近郊)와 강원대학교(江原大學校) 연습림(演習林)에서 자라고 있는 잣나무와 소나무의 직경생장량(直徑生長量)을 측정(測定)하여 다변량해석(多變量解析) 방법(方法)으로 직경생장(直徑生長)에 미치는 기상인자(氣象因子)의 영향(影響)을 조사(調査)하였으며, 또한 특이(特異)한 기후변동하(氣候變動下)에서 나타나는 Key-year를 분석(分析)하였다. 그 결과(結果)는 요약(要約)하면 다음과 같다. 1. 동일(同一)한 기상조건(氣象條件)과 입지환경하(立地環境下)에서 잣나무의 직경생장(直徑生長)이 소나무의 직경생장(直徑生長)보다 양호(良好)하게 나타났다. 2. 잣나무의 직경생장(直徑生長)에 미치는 기상인자(氣象因子)의 영향(影響)에 대한 크기는 안개, 일조시수(日照時數), 강수량(降水量), 습도(濕度), 온량지수(溫量指數), 증발량(蒸發量)의 순위(順位)로 나타났다. 3. 소나무의 직경생장(直徑生長)에 미치는 기상인자(氣象因子)의 영향(影響)에 대한 크기는 안개, 일조시수(日照時數), 습도(濕度), 강수량(降水量), 온량지수(溫量指數)의 순위(順位)로 나타났으며, 증발량(蒸發量)은 유의성(有意性)이 인정(認定)되지 않았다. 4. Key-year는 잣나무와 소나무의 직경생장(直徑生長)에 미치는 특이(特異)한 기후변동(氣候變動)이 있었던 1964년(年)과 1973년(年)에 나타났다.

• 한국연초학회지
• /
• 제29권2호
• /
• pp.59-65
• /
• 2007

The study was carried out to investigate water activity, physicochemical properties and color degree of burley tobacco stored in shelf with different moisture content for 56 days. The study was consist of two experimental designs, that is, moisture content in burley tobacco was kept to 13 to 15 %, 17 to 19 %, and 21 to 23 % under ambient temperature of $20^{\circ}C$ with relative humidity of 24 %, and another group of in burley tobacco was only kept in ambient temperature of $3^{\circ}C$ with relative humidity of 50 % for 56 days with same water content of former treatment. Normal leaves were kept for 56 days under 21 to 23% of moisture content with increased water activity and TSNA(tobacco-specific nitrosamine content. It was considered that favorable leaves conditions are due to favorable microbial growth resulting in increased TSNA content. The total nitrogen content has not changed in two experimental groups for 56 days, otherwise the nitrate form nitrogen and total alkaloid contents were only increased by 21 to 23 % of water content. Degree of pH change was slightly decreased in both storage and water treatment. It was more decreased in 21 to 23% of moisture content than that of other moisture content. In stored leaf tobacco, higher moisture content caused lower brightness, yellow degree, and carbonization quotient.

• 한국포장학회지
• /
• 제30권1호
• /
• pp.53-62
• /
• 2024

Molded pulp products has become more attractive than traditional materials such as expanded polystyrene foam (EPS) owing to low-priced recycled paper, environmental benefits such as biodegradability, and low production cost. In this study, various design factors regarding compression and cushioning characteristics of the molded pulp cushion with truncated pyramid-shaped structural units were analyzed using a test specimen with multiple structural units. The adopted structural factors were the geometric shape, wall thickness, and depth of the structural unit. The relative humidity was set at two levels. We derived the cushion curve model of the target molded pulp cushion using the stress-energy methodology. The coefficient of determination was approximately 0.8, which was lower than that for EPS (0.98). The cushioning performance of the molded pulp cushion was affected more by the structural factors of the structural unit than by the material characteristics. Repeated impacts, higher static stress, and drop height decreased the cushioning performance. Its compression behavior was investigated in four stages: elastic, first buckling, sub-buckling, and densification. It had greater rigidity during initial deformation stages; then, during plastic deformation, the rigidity was greatly reduced. The compression behavior was influenced by structural factors such as the geometric shape and depth of the structural unit and environmental conditions, rather than material properties. The biggest difference in the compression and cushioning characteristics of molded pulp cushion compared to EPS is that it is greatly affected by structural factors, and in addition, strength and resilience are expected to decrease due to humidity and repetitive loads, so future research is needed.

• Journal of Ecology and Environment
• /
• 제48권1호
• /
• pp.60-73
• /
• 2024

Background: The available information on terrestrial pest gastropods and their impact on the environment worldwide is scarce and outdated. The present study aimed to address this gap by conducting the first comprehensive survey of pest gastropods in the Nuwara Eliya District, an important vegetable growing area in the highlands of Sri Lanka. Eighty agricultural lands were surveyed over two years by establishing ten 1 m2 sampling plots per crop type in each agricultural land. Geo-coordinates, air temperature, elevation, relative humidity, daily rainfall, soil pH, species richness and abundance were recorded for rainy and non-rainy periods. The relationship between species composition and environmental variables was analyzed using multi-regression models and distribution maps. Results: Out of the 14 species recorded in agricultural lands, nine were identified as exotic pest species. Species abundance (t = 4.69, p < 0.05) and diversity was higher in the rainy period and the dominant species during this period were Bradybaena similaris (t = 2.69, p < 0.05) and Deroceras reticulatum (t = 2. 46, p < 0.05). Eggs and estivating adults were found in soil and under decaying organic matter during the non-rainy period. The exotic species showed broader preferences for the measured environmental factors and showed a wider range in distribution compared to the native species. Variation in pest gastropod composition was significantly accounted for by elevation, relative humidity, soil pH and daily rainfall. Additionally, the species richness and abundance varied across locations due to the combined effects of elevation, crop type and stage, and field type. Conclusions: The study emphasizes the importance of understanding the biology and ecology of gastropod pests to develop effective management strategies. By considering the influence of environmental factors and implementing appropriate soil management techniques, such as targeting specific habitats and crop stages, it is possible to mitigate pest populations and minimize their impact on agricultural lands. Overall, this research contributes valuable insights into the dynamics and interactions of terrestrial gastropods in agricultural ecosystems, supporting sustainable pest management practices.

• 대한토목학회논문집
• /
• 제30권5B호
• /
• pp.437-444
• /
• 2010

토양수분은 물 에너지 순환에서 지표면과 대기 사이의 복잡한 관계를 이해하기 위한 중요한 수문인자 중 하나이다. 일반적으로, 토양수분은 온도, 바람, 토성에 의한 증발과 식생에 의한 증산에 의하여 결정이 되는 것으로 알려져 있다. 하지만, 각 인자와 토양수분과의 관계에 대한 심도 있는 연구는 아직 부족한 실정이다. 본 연구에서는 Flux tower(설마천 타워)에서 생성되는 측정인자인 대기온도, 비습, 풍속을 고려하여 토양수분 예측치를 산정하였으며 이를 실측치와 비교하고 상관분석을 실시하였다. 토양수분은 특히 겨울에는 지중온도와 매우 강한 양의 상관계수를 가졌으나 이외의 항인 대기온도, 비습, 풍속과는 상관성이 낮게 산정되었다. 봄부터 가을까지의 자료에서는 지중온도가 토양수분과 매우 강한 음의 상관계수를 가지며 대기온도와 비습의 경우 상당한 음의 상관계수를 가지며 풍속은 식생의 영향으로 상관성이 매우 낮은 것으로 판단되었다. 중회귀분석을 통하여 계절별 토양수분을 추정하여 이를 측정값과 비교하였으며 결정계수($R^2$)는 봄의 경우 0.82, 여름의 경우 0.81, 가을의 경우 0.82, 겨울의 경우 0.96로 대체로 양호한 결과를 나타내었다. 본 연구에서 토양수분에 대한 지표상의 수문기상인자들과의 밀접한 상관관계는 공간해상도가 비교적 큰 원격탐사 토양수분의 downscaling에 유용한 정보를 제공할 수 있으며, 지표상의 물 에너지 순환에 대한 보다 나은 이해를 줄 것으로 사료된다.

• 한국의류학회지
• /
• 제38권1호
• /
• pp.73-86
• /
• 2014

Persimmon juice dye-printed fabrics with printing were used for a Galot one-piece dress. The Galot dress was assessed in comparison to a white undyed one-piece dress of the same design through a wearing test conducted in a climatic chamber with an air temperature of $30{\pm}1^{\circ}C$, $50{\pm}5%$ R.H, and 0.2m/sec air movement on 4 healthy female subjects in their 20s. The subjects went through a 30-min stable period, a 30-min exercise of walking on a $5^{\circ}$ slope treadmill at 70m/min period, and a 20-min recovery period. In addition, a physiological reaction and subjective sensation were estimated. The results showed that significant differences were mostly observed from a sweating period that occurred during the latter half of the exercise. More specific results are as follows. First, skin temperature on the chest and mean skin temperature were significantly higher (p<.01) in rayon dyed sample dresses. Second, micro-humidity on the back showed a significant difference (p<.01). Both cotton and rayon persimmon juice dyed sample dresses produced lower microhumidity than their counterparts and as for cotton the difference occurred over the entire experimental period; however, it occurred after the middle of the exercise period for rayon. Third, the sweating rate on the back decreased in both cotton and rayon with persimmon juice dye but no significant difference was observed. Fourth, subjective three sensations revealed significant differences between cotton and rayon (p<.01), indicating that the subjects felt more cool, dryer and more comfortable in a cotton Galot. As described above, the analysis of physiological responses and the subjective sensation of undyed and dyed clothing shows the effect of persimmon juice dyeing. Persimmon juice dyeing also seemly increased air permeability, moisture regain and permeability facilitating body heat ventilation, as micro-humidity and sweat rate were lowered. However, this was not shown consistently in subjective responses on comfort especially when wearing rayon dresses.