• Journal of Korea Water Resources Association
• /
• v.30 no.2
• /
• pp.119-129
• /
• 1997

A three-dimensional numerical model for the simulation of meso-scale local circulation is developed and it is applied to the land and sea breezes which take place around Ulsan. The surface temperature and moisture on the land are determined by means of the surface heat budget with a layer of vegetation considered. The vertical diffusion coefficients of momentum, heat and specific humidity at the surface layer are obtained by the lever-2 model of the turbulence closure proposed by Yamada (1982). This model proved to be effective in simulating the structure of the land and sea breezes around Ulsan.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.6
• /
• pp.519-524
• /
• 2002

An experimental study has been conducted to investigate the effects of surface energy on frost formation. Test samples with two different surfaces are installed in a wind tunnel and exposed to a humid airflow. Dynamic contact angles (DCA) for these surfaces are $23^{\circ}\;and\;88^{\circ}$, respectively. The thickness and the mass of frost layer are measured and used to calculate the frost density while frost formation is visualized simultaneously with their measurements. Results show that frost density increases as time increases at specific test conditions. The air Reynolds number, the airflow humidity and the cold plate temperature are maintained at 12,000, 0.0042 kg/kg and $-21^{\circ}C$, respectively. The surface with a lower DCA shows a higher frost density during two-hour test, but no differences in the frost density have been found after two hours of frost generation. Empirical correlations for thickness, mass and density are assumed to be the functions of the test time and DCA.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.937-942
• /
• 2008

In this paper, new methodology is proposed to estimate the cooling load using design parameters of building and predicted weather data. Only two parameters such as maximum and minimum temperature are necessary to obtain hourly distribution of cooling load for the next day. The maximum and minimum temperature that are used for input parameters can be obtained from forecasted weather data. Benchmarking building(research building) is selected to validate the performance of the proposed method, and the estimated cooling loads in hourly bases are calculated and compared with the measured data for benchmarking building. The estimated results show fairly good agreement with the measured data for benchmarking building.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1785-1787
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, $MgCl_2$ are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2154-2159
• /
• 2008

In conventional air-conditioning systems, when the circulated air from the air-conditioned space pass through the cooling coil in the air-conditioning system, the air is over-cooled to eliminate the moisture as well as to decrease the temperature. The purpose of this study is to test and evaluate performance of the cooling/reheating system which can save both cooling energy and reheating energy by exchanging heat between the cooled air and reheated air. Experimental apparatus consists of fan, ducts, polymer exchangers, cooling coil, electronic auxiliary heater and data acquisition system. Two types of polymer exchanger, plate type and dimple type, made of polypropylene for cooling/reheating system are designed. Heat transfer and dehumidification characteristics of system are tested. The results show that the energy saving is up to 40% in the range of present experimented conditions, and it decreases with increasing velocity, inlet temperature and specific humidity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.11
• /
• pp.1125-1133
• /
• 2001

Since the surface temperature of the evaporating tube in an ammonia unit cooled is lower than the dew point of atmosphere, the moisture in the atmosphere condenses and the frost grows on the tube. The frost of liquid film decreases the heat transfer rate. The reliable analysis of the heat transfer is required for the prediction of the optimal design of the ammonia unit cooler. For the specific commercial model, the performance was numerical1y estimated for the variation of operating condition and geometric configuration. It is found that there exists an optimum range for the parameters such as mass flow rate of air and refrigerant, humidity, refrigerant quality, fin pitch, the number of step, the number of rows and the pattern of refrigerant path.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.83-84
• /
• 2017

In the construction site, it is necessary to estimate the compressive strength of concrete in order to adjust the demolding time of the form, and establish and adjust the construction schedule. The compressive strength of concrete is determined by various influencing factors. However, the conventional method for estimating the compressive strength of concrete has been suggested by considering only 1 to 3 specific influential factors as variables. In this study, seven influential factors (W/B ratio, Water, Cement, Fly ash, Blast furnace slag, Curing temperature, and humidity) of papers opened for 10 years were collected at three conferences in order to know the various correlations among data and the tendency of data. The purpose of this paper is to estimate compressive strength more accurately by applying it to algorithm of the Deep learning.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.691-695
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, MgCl$_2$are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.29 no.1
• /
• pp.93-119
• /
• 2014

Tropical tasar silkworm, Antheraea mylitta (Lepidoptera: Saturniidae) is a polyphagous silk producing forest silkworm of commercial importance in India. Forest dependent people rear its larvae on different forestry host plants twice or thrice in a year for small household income. Larvae of A. mylitta feeds on many forest tree species, but always show a great degree of selectivity as a function of its behavioural responses to physical structure and chemical features of the host plants. Cocoon crop of A. mylitta is influenced by heterogeneity of tasar food plants and climatic conditions of the habitat. The role of host plants, temperature, humidity, rainfall, photoperiod and climatic variables on the growth and development of insects have clearly been demonstrated. This article entails an in-depth analysis on ecological and nutritional aspects of A. mylitta, which may provide selective information to researcher and forest managers, who are particularly associated with livelihood improvement of the poor people in forested area through location specific forest insect industry.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.6
• /
• pp.609-622
• /
• 2015

Objective: This study aims to investigate the correlation between office and work environment satisfaction levels and workers' musculoskeletal symptoms by conducting surveys asking office workers to state their musculoskeletal symptoms and office and work environment satisfaction levels. Background: The increased number of office workers and their indoor work hours using computers have led to new understandings of the importance of office environment including its temperature, humidity, noise levels, lighting and quality of air, and work environment including monitor arrangement, space arrangement and the functions of desks and chairs. Method: Specific details on office work, office environment satisfaction levels, work environment satisfaction levels, musculoskeletal symptoms, absence from work and treatment due to musculoskeletal related symptoms were analyzed based on the survey answers given by 397 office workers who were the subjects of this research. Results: Office workers showed different characteristics of musculoskeletal symptoms depending on their gender, age, work experience, office hours, break time and time spent on computers. Also, differences in symptoms were found for workers'with different satisfaction levels for office environment (temperature, humidity, noise levels, quality of air, lighting) and work environment (location of monitors, area and display of office space, chairs and desks). ANOVA shows the differences between groups of subjects classified by the experience of work-absences and treatments or pain complaints. Conclusion and Application: Relationship between workers' satisfaction levels with the office and work environment and their musculoskeletal symptoms is expected to be served as essential data for systematic management of the workplace.