• 에너지공학
• /
• 제24권2호
• /
• pp.79-83
• /
• 2015

Hydrogen has long been recognized as a fuel having some unique and highly desirable properties, for application as a fuel in engines. Hydrogen has some remarkably high values of the key properties for transport processes, such as kinematic viscosity, thermal conductivity and diffusion coefficient, in comparison to those of the other fuels. Such differences together with its extremely low density and low luminosity help to give hydrogen its unique diffusive and heat transfer characteristics. The thermodynamic and heat transfer characteristics of hydrogen tend to produce high compression temperatures that contribute to improvements in engine efficiency and lean mixture operation.

• 설비공학논문집
• /
• 제7권1호
• /
• pp.120-131
• /
• 1995

Thermodynamic analysis of extraction process from the constant pressure LNG(Liquefied Natural Gas) vessel was performed in this study. LNG was assumed as a binary mixture of 90% methane and 10% ethane by mole fraction. The thermodynamic properties such as temperature, composition, specific volume and the amount of cold energy were predicted during extraction process. Pressure as a parameter ranges from 101.3kPa to 2000kPa. The result shows the peculiar phenomena for the LNG as a mixture. Both vapor and liquid extraction processes were investigated by a computer model. The property changes are negligible in the liquid extraction process. For the vapor extraction process, the temperature in the vessel increases rapidly and the extracted composition of methane decreases rapidly near the end of extracting process. Specific volume of vapor has the maximum and that of liquid has the minimum during the process. When pressure is increased, specific volume of vapor decreases and that of liquid increases. It was found that specific volume of vapor phase had a major effect on the heat absorption at constant pressure during vapor extraction process. If the pressure of the vessel increases, the total cold energy which can be utilized from LNG decreased.

• 대한수학회지
• /
• 제45권3호
• /
• pp.645-681
• /
• 2008

The Navier-Stokes system for heat-conducting incompressible fluids is studied in a domain ${\Omega}{\subset}R^3$. The viscosity, heat conduction coefficients and specific heat at constant volume are allowed to depend smoothly on density and temperature. We prove local existence of the unique strong solution, provided the initial data satisfy a natural compatibility condition. For the strong regularity, we do not assume the positivity of initial density; it may vanish in an open subset (vacuum) of ${\Omega}$ or decay at infinity when ${\Omega}$ is unbounded.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.43-54
• /
• 1999

The effects of equivalence ratio and pressure on burnt gas temperature in premixed fuel rich propane-oxygen-inert gas combustion are investigated over the wide ranges of equivalence ration from 1.5 to 2.7 and pressure from 0.1 to 7 MPa by using a specially designed disk -type constant-voume combustion chamber, The premixtures are simultaneously ignited by eight spark plugs located on the circumference of combustion chamber with 45 degree interals. The eight converging flames compress the end gases to high pressures. The burnt gas temperature is meausured by the nmodifie dtow-colr pyrometry method. The transmissivity in the chamber center during the final stage of combustion at the hightest pressure is meausred by in situ laser extinction method. It is found that a temperature difference between the burnt gas temperature measured by mofidied and conventrational two-color method is 10 to 20 K, but the accuracy of the modified two-color methdo is higher if the local transmissivity in observed region is uniform , and the combustion at higher pressures results gas density conditions and the burnt gas temperature increases as the volume fraction of argon is increased because the specific heat of argon is lower compared to that of nitrogen with a constant equivalence ratio.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.136-141
• /
• 2013

In order to achieve simultaneously the ultra-low NOx, the high power and the high efficiency in a hydrogen-fueled engine with SI and the external mixture, the effects of low temperature combustion, performance and exhaust are compared and analyzed by the application of the lean boosting. As the results, the decrease rate of the high temperature in the hydrogen is less decreased than the other fuels by high constant-volume specific heat. However, when the conditions of 1.7bar and ${\Phi}=0.33$ are reached by the lean boosting, the maximum gas temperature of hydrogen is decreased under the temperature of NOx formation and it is possible to stabilize combustion below 2% of COVimep. Also, at that condition, it is feasible to achieve simultaneously NOx-free and the power of gasoline level. Therefore, it is found that the lean boosting is useful in the hydrogen-fueled engine.

• 한국화재소방학회논문지
• /
• 제24권4호
• /
• pp.12-17
• /
• 2010

본 연구는 자원의 재활용 측면에서 적용한 폐타이어 분말을 혼입한 모르타르에 난연제를 첨가하여 그 난연특성을 알아보고자 한다. 폐타이어 분말의 혼입으로 단열성능 향상은 이미 검증이 되었으나, 단열성과 결합력의 상반된 재료 특성으로 인해 화재에는 취약한 바. 이에 난연제를 첨가하여 인명안전에 만전을 기하고자 한다. 폐타이어 분말을 혼입한 모르타르의 난연제를 첨가하여 첨가 비율에 따른 그 특성을 알아보고자 한다. 화재 초기의 특성을 알 수 있는 재료의 가연성 여부를 실제 화재와 유사한 복사열에 의해 시험하고자 하였으며. 실험방법은 한국건자재 시험연구원에 의뢰하여 ISO 5657 절차에 의한 재료의 착화시간, 불꽃 발생여부, 시험체의 형태변화 등을 고찰하고자 한다. 폐타이어 분말이 혼입된 모르타르와 난연제(무기계)의 배합비율은 폐타이어 분말의 0%, 30%, 60%, 90% 비율로 수산화알루미늄을 첨가하며 조연제인 삼산화안티몬은 난연제의 10%를 첨가한다. 시험체를 수평설치하여 일정한 복사열($1{\sim}5W/cm^2$)을 시험체 상부표면에 노출시키면 열이 시험체 표면에서 내부로 전도되어 온도가 상승한다. 온도가 충분히 높다면 시험체는 열분해하면서 가연성가스를 발생시킨다. 이 때 점화원인 점화기구의 작은 불꽃은 시험체 중앙 위의 10mm 지점에 규칙적인 간격으로 접염하였을때의 재료의 지속적인 표면 착화특성(착화시간) 평가한다. 난연제 미첨가시에도 착화가 일어나지 않아 폐타이어분말이 혼입된 모르타르의 가연성은 적은 것으로 볼 수 있으며, 화재실내에 존재하는 가연물의 양을 평가하는 화재하중에 이를 반영할 수 있다. 폐타이어 분말에 무기계 난연제를 첨가함에 따라 흡열효과에 의해 불꽃은 발생하지 아니하고 폐타이어 분말입자의 분해속도도 지연되었음을 확인할 수 있다. 복사열로 인해 난연제인 수산화알루미늄이 열분해하여 모르타르내 수증기 분압이 증가하여, 폐타이어 분말의 불꽃이나 연소형태는 보이지 않았다.