• 한국수자원학회논문집
• /
• 제33권6호
• /
• pp.671-679
• /
• 2000

미계측지점에서의 일유출량 시계열을 합성하기 위한 도구로서 유황곡선과 공간내삽알고리즘을 이용한 지역화기법이 개발되었다. 본 연구에서는 낙동강 유역의 8개 유량 관측 지점들 중 일부를 미계측지점으로 가정하여 지역화 기법을 통해 미계측 지점의 유황곡선을 합성하였으며, 합성된 유황곡선을 공간 내삽 알고리즘에 적용하여 미계측 지점의 일유출수문곡선을 합성하였다. 미계측지점으로서 가정된 지점에서의 관측 수문곡선과 합성 수문 곡선을 비교한 결과는 상당히 좋은 값을 나타내었으며, 이로써 지역화 기법이 대상 하천의 유출 특성을 잘 나타내어 주는 기법임을 알 수 있었다. 이는 복잡한 매개 변수 산정을 필요로 하고 시간과 비용이 많이 드는 확정론적 모형의 적용 없이도 합리적인 일유출량 정보를 지역화 기법을 통해 획득할 수 있음을 보여준다. 그리고, 수자원 실무에서 많이 이용되는 비유량법과의 비교를 통해 지역화 기법이 비유량법보다 더 좋은 결과를 나타냄을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권4호
• /
• pp.9-26
• /
• 2017

When a warm well located downgradient is captured by cold thermal plume originated from an upgradient cold well, the warm thermal plume is pushed further downgradient in the direction of groundwater flow. If groundwater flow direction is parallel to an aquifer thermal energy storage (ATES), the warm well can no longer be utilized as a heat source during the winter season because of the reduced heat capacity of the warm groundwater. It has been found that when the specific discharge is increased by $1{\times}10^{-7}m/s$ in this situation, the performance of ATES is decreased by approximately 2.9% in the warm thermal plume, and approximately 6.5% in the cold thermal plume. An increase of the specific discharge in a permeable hydrogeothermal system with a relatively large hydraulic gradient creates serious thermal interferences between warm and cold thermal plumes. Therefore, an area comprising a permeable aquifer system with large hydraulic gradient should not be used for ATES site. In case of ATES located perpendicular to groundwater flow, when the specific discharge is increased by $1{\times}10^{-7}m/s$ in the warm thermal plume, the performance of ATES is decreased by about 2.5%. This is 13.8% less reduced performance than the parallel case, indicating that an increase of groundwater flow tends to decrease the thermal interference between cold and warm wells. The system performance of ATES that is perpendicular to groundwater flow is much better than that of parallel ATES.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1621-1623
• /
• 1999

Recently, high voltage outdoor ploymer insulators have been widely used commercially owing to their excellent electrical and mechanical properties, superior comtamination flashover performance, light weight, easy installation or handing, no maintenance during service, competitive price and so on. compared to porcelaain and glass insulators. For instance, silicone rubber(SR) for polymeric insulators specially has much superior insulating and anti-pollution performance due to its specific hydrophobicity even in severe contaminated environments. We have investigated surface discharge current characteristics of silicone rubbers(SR) for HV outdoor composite insulation specimen under accelerated aging codition using a computer measuring system. The relations of average leakage current and surface discharge current repetition rates and discharge current amplitude, the distribution of discharge current amplitude were studied to investigate electrical conduction of silicone rubber surface with the salt fog condition.

• Child Health Nursing Research
• /
• 제26권1호
• /
• pp.107-120
• /
• 2020

Purpose: This study was conducted to investigate the educational needs of parents of infants and toddlers with congenital heart disease (CHD) after hospital discharge. Methods: Qualitative content analysis was conducted of in-depth interviews of eight parents, and the results of an online survey of 171 parents were analyzed quantitatively. Results: Only 16.4% of parents reported that they had received education after hospital discharge on how to provide care for a child with CHD at home. The main reason why parents did not receive education on this topic was that they did not have sufficient opportunities or information (75.5%). In addition, 97.1% of parents stated that they needed educational programs that would be available at home after discharge. In terms of specific educational content, parents expressed the highest needs for education on the symptoms of CHD and ways to cope with them, the prognosis of CHD, and the growth and development of infants and toddlers with CHD. Conclusion: The study showed that parents' educational needs were high in many ways. However, the information and educational opportunities offered after discharge were insufficient compared to those needs. Further research is needed to develop post-hospital educational programs that meet their needs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.820-823
• /
• 2000

The characteristics of wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of tungsten carbide in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension, the gap of deflection was decreased after thickness 60mm and discharge time of 6$\mu\textrm{s}$ due to the changing from fundamental mode to vibration mode. The deflection is the smallest at the water specific resistivity of 7.5 kΩ ㆍcm. The deflection is found to be decreased as increasing dwell time, and the result is due to the vibration of the pressure and the amount of the dielectric. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, was observed for rough wire-cutting EDM of STD-11. This phenomena is found to be decreased as the number of EDM is increased. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• 물과 미래
• /
• 제9권1호
• /
• pp.86-100
• /
• 1976

To study influences on the downstream, and the Gunsan harbor by setting up estuary of the Gumgang, available data which were collected from the measuring stations which were established within the river basin of which results attained are as follows: 1. The discharge can be calculated as the relationship between the discharge and precipitation in the basin is $R=4{\times}10^{-4}p^2$ or R=P-600 2. The discharge flow in to small resevoirs in the basin can be estimated as $QR=QS\frac{PR-600}{PS-600}(\frac{AR}{AS})$ 3. This daily average discharge at Kongju is 31% less than the during maximum probable discharge and that in Okcheon is 48% less than the daily maximum probable flood. 4. The maximum probable flood from the small stream in the basin can be estimated by a $Q=82.45A^{0{\cdot}464}$ 5. Sediments can be computed with Qs (suspended load)=1.41 $Q^{1{\cdot}42}$ and Qb (bed load)=165.2 $Q^{0{\cdot}705}$. 6. By setting up the specific estuary the tidal movement will be reduced to 93.6% on the average and the sedimentation is reduced to 96.0%. Upon review of overall analysis, the dead wate level of estuary of Gumgang will completely sedimented in next 30 years, therefore, the dredging work at Gunsan harbor is reduced to 73.6%, it is considered that life length will be extended about 52years taking account the existing condition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.306-313
• /
• 2004

The microwave discharge ion engine generates plasmas of both the main ion source and the neutralizer using 4㎓ microwave without discharge electrodes and hollow cathodes, so that long life and durability against oxygen and air are expected. The MUSES-C “HAYABUSA” asteroid explorer installing four microwave discharge ion engines “$\mu$10s” was launched into deep space by M-V rocket No.5 on May 9, 2003. After vacuum exposure and several runs of baking for reduction of residual gas the ion engine system established the continuous acceleration of the spacecraft toward the asteroid “ITOKAWA”. The Doppler shift measurement of the communication microwave revealed the performance of ion engines, which is 8mN thrust force for a single unit with 3,200sec specific impulse at 23mN/㎾ thrust power ratio. At the end of 2003 the accumulated operational time exceeded 8,000 hour and unit. HAYABUSA will execute the Earth swing-by on June 2004 and arrive at the asteroid in 2005 and return to Earth in 2007.

• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.160-168
• /
• 2010

본 논문은 대기압 펄스 배리어 방전을 이용하여 NO 가스를 무해한 물질로 환원시키기 위하여 방전공간에서의 NO 분자의 생성 및 제거과정에 대하여 레이져 유기형광법을 이용하여 시 공간적인 밀도변화를 측정 및 분석하였다. 사용된 펄스 배리어 방전리액터는 진전속도가 $2.7{\times}10^6$[m/s] 인 1차 스트리머가 음극표면에 도착한 이후에 2차 스트리머가 양극 부근에 발생되었다. 그리고, 펄스 레이져에 의하여 NO 분자만을 효율적으로 상위준위로 여기시키기 위하여 Nd:Yag 및 염료 레이져를 복합하여 226[nm]의 자외광을 방전공간으로 도입하였으며, NO 분자만을 $A^2{\Sigma}^+{\leftarrow}X^2{\prod}$(0,0)으로 여기시키고, 여기된 분자들이 낮은 준위 $A^2{\Sigma}^+{\rightarrow}X^2{\prod}$(0,2), (0,3)로 복귀됨에 따라 방출되는 주요한 형광신호를 측정하였다. NO 분자의 시 공간적 변화 측정결과로부터 NO 가스를 효율적으로 제거하기 위해서는 산소농도를 가능한 2 [%]이하로 낮추고, 2차 스트리머 진전에 의해서 충분하게 방전공간에서 NO 환원반응을 유발할 수 있도록 제어하는 것이 필요하다고 판단된다.

• 성인간호학회지
• /
• 제22권2호
• /
• pp.190-199
• /
• 2010

Purpose: The purpose of this study was to determine the differences in the level of disease related knowledge, compliance of health behavior, and educational needs in relation to time (at discharge and 6 months after discharge) among patients underwent percutaneous coronary intervention (PCI). Methods: Data were collected from January 1, 2006 to September 30, 2006 and a total of 60 patients participated in the study. The survey was conducted in patients underwent PCI at the time of discharge right after discharge education was provided and at a follow up visit which was 6 months after discharge. Results: The level of disease related knowledge (p<.001), the compliance of health behavior (p<.001), educational need (p=.496), the sub-item of sexual life (p<.001), follow up (p<.001), diet (p=.021), stress (p<.001) in compliance of health behavior, and the sub-item of specific character of disease in educational needs (p=.015) were significantly different between discharge and 6 months after discharge. Conclusion: The results of this study suggested that further education should be provided to the patients underwent PCI regarding medication, smoking cessation, daily life and exercise at a time of 6 months after discharge in order to increase patient compliance of health behavior.

• 대한토목학회논문집
• /
• 제31권4B호
• /
• pp.309-314
• /
• 2011

하류수위의 영향을 받는 하도 내 조절수문의 경우 조절수문의 기하학적 형상은 물론 상 하류 수위에 따라 방류특성이 변화하므로 효율적 수위조절 및 수자원 관리를 위해서는 정확한 개도별 방류능 산정이 요구된다. 최근 4대강 살리기 사업으로 인하여 보의 건설과 함께 조절수문이 많이 설치되고 있으나 국내에서는 조절수문 개도에 따른 방류형태 분류기준 및 방류능 산정에 대한 연구를 찾아보기 힘든 실정이다. 따라서 본 연구에서는 특정 조절수문에 대한 수리모형실험을 통하여 방류형태(자유위어, 수중위어, 자유오리피스, 수중오리피스)를 판단할 수 있는 주요 인자를 찾고 분류기준을 검토하여 조절수문 운영을 위한 기초자료를 제시하였다. 게이트 개도높이와 상류수심의 비($h_g/h_1$), 하류수심과 게이트 개도높이의 비($h_3/h_g$)와 하류수심과 상류수심의 비($h_3/h_1$)를 하도 내 조절수문의 개도 및 상 하류 수위에 따른 방류형태를 판단할 수 있는 주요 인자로 선정하고 방류형태 분류기준 값을 제안하였다. 또한 본 연구에서 유도된 각 방류형태별 유출계수 및 방류능 산정공식으로 예측된 유량과 모형에서의 실측유량을 비교하여 연구결과의 적용성을 검증하였다.