• Title/Summary/Keyword: specific differential phase

Search Result 35, Processing Time 0.023 seconds

A Study on Thermo-Physical Properties of Microencapsulated Phase Change Material Slurry (마이크로캡슐 잠열 축열재 혼합수의 열물성에 관한 연구)

  • 임재근;최순열;김명준
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.28 no.6
    • /
    • pp.962-971
    • /
    • 2004
  • This paper has dealt with thermo-physical properties of microencapsulated phase change material slurry as a latent heat storage material having a low melting point. The measured results of the thermo-physical properties of the test microencapsulated phase change material slurry, those are, density, specific heat, thermal conductivity and viscosity, were discussed for the temperature region of solid and liquid phases of the dispersion material (paraffin). The measurements of these properties of microencapsulated phase change material slurry have been carried out by using a specific-gravity meter, a water calorimeter, a differential scanning calorimeter(DSC), a transient hot wire method and rotating type viscometer, respectively. It was clarified that the additional properties law could be applied to the estimation of the density and specific heat of microencapsulated phase change material slurry and also the Euckens equation could be applied to the estimation of the thermal conductivity of this slurry.

Evolutionary computational approaches for data-driven modeling of multi-dimensional memory-dependent systems

  • Bolourchi, Ali;Masri, Sami F.
    • Smart Structures and Systems
    • /
    • v.15 no.3
    • /
    • pp.897-911
    • /
    • 2015
  • This study presents a novel approach based on advancements in Evolutionary Computation for data-driven modeling of complex multi-dimensional memory-dependent systems. The investigated example is a benchmark coupled three-dimensional system that incorporates 6 Bouc-Wen elements, and is subjected to external excitations at three points. The proposed technique of this research adapts Genetic Programming for discovering the optimum structure of the differential equation of an auxiliary variable associated with every specific degree-of-freedom of this system that integrates the imposed effect of vibrations at all other degrees-of-freedom. After the termination of the first phase of the optimization process, a system of differential equations is formed that represent the multi-dimensional hysteretic system. Then, the parameters of this system of differential equations are optimized in the second phase using Genetic Algorithms to yield accurate response estimates globally, because the separately obtained differential equations are coupled essentially, and their true performance can be assessed only when the entire system of coupled differential equations is solved. The resultant model after the second phase of optimization is a low-order low-complexity surrogate computational model that represents the investigated three-dimensional memory-dependent system. Hence, this research presents a promising data-driven modeling technique for obtaining optimized representative models for multi-dimensional hysteretic systems that yield reasonably accurate results, and can be generalized to many problems, in various fields, ranging from engineering to economics as well as biology.

Identification of Inrush and Internal Fault in Indirect Symmetrical Phase Shift Transformer Using Wavelet Transform

  • Bhasker, Shailendra Kumar;Tripathy, Manoj;Kumar, Vishal
    • Journal of Electrical Engineering and Technology
    • /
    • v.12 no.5
    • /
    • pp.1697-1708
    • /
    • 2017
  • This paper proposes an algorithm for the differential protection of an Indirect Symmetrical Phase Shift Transformer (ISPST) by considering the different behaviors of the compensated differential current under internal fault and magnetizing inrush conditions. In this algorithm, a criterion function is defined which is based on the difference of amplitude of the wavelet transformation over a specific frequency band. The function has been used for the discrimination between three phase magnetizing inrush and internal fault condition and requires less than a quarter cycle after disturbance. This method is independent of any coefficient or threshold values of wavelet transformation. The merit of this algorithm is demonstrated by the simulation of different faults in series and excitation unit and magnetizing inrush with varying switching conditions on ISPST using PSCAD/EMTDC. Due to unavailability of in-field large interconnected transformers for such a large number of destructive tests, the results are further verified by Real Time Digital Simulator (RSCAD/RTDS). The proposed algorithm has been compared with the conventional harmonic restraint based method that justifies the application of wavelet transform for differential protection of ISPST. The proposed algorithm has also been verified for different rating of ISPSTs and satisfactory results were obtained.

Differential Multicast in Switch-Based Irregular Topology Network (스위치 기반의 비정규적 네트워크에서의 차별적인 다중 전송)

  • Roh, Byoun-Kwon;Kim, Sung-Chun
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.29 no.7
    • /
    • pp.394-400
    • /
    • 2002
  • Networks of Workstations(NOWs), that has features of flexibility and scalability, recently has emerged as an inexpensive alternative to massively parallel multicomputers. However it is not easier to perform deadlock-free multicast than regular topologies like mash or hypercube. Single phase differential multicast(SPDM) is a modified multicast algorithm with less burden of the root node. By applying quality of serviece(QoS), a specific node can have differentiated service and artificial change of message flow pattern is also available. As the results of performance evaluation experiments, SPDM has lower latency and lower packet concentration rate of the root node than the case of SPAM, and has ability to control network load distribution among switch nodes by controlling the assignment rate among nodes.

Premature Stiffening of Cement Paste Caused by Secondary Gypsum and Syngenite Formation (False Set)

  • Chung, Chul-Woo;Lee, Jae-Yong
    • Architectural research
    • /
    • v.13 no.1
    • /
    • pp.25-32
    • /
    • 2011
  • The purpose of this research is to investigate the effect of specific hydration reaction on the stiffening process of cement paste. The cement compositions are manipulated to cause specific hydration reactions (secondary gypsum and syngenite formation) responsible for false set, and the relationship between specific hydration reactions and the flow and stiffening behavior of cement paste were investigated using modified ASTM C 403 penetration resistance measurement and oscillatory shear rheology. X-ray powder diffraction (XRD) was used for the phase identification associated with premature stiffening of cement paste. Differential thermal analysis (DTA) and thermogravimetric analysis (TGA) were used for verification of syngenite formation. From the results, both secondary gypsum and syngenite formation caused faster stiffening and set. The amount of syngenite produced during 1 hour hydration was approximately 1 % of total mass of the cement paste, but cement paste with syngenite formation showed significantly accelerated stiffening behavior compared to normal cement paste.

Sex Linked Developmental Rate Differences in Murrah Buffalo (Bubalus bubalis) Embryos Fertilized and Cultured In Vitro

  • Sood, S.K.;Chauhan, M.S.;Tomer, O.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.12 no.1
    • /
    • pp.15-21
    • /
    • 1999
  • The aim of the present study was to determine the effect of paternal sex chromosome on early development of buffalo embryos fertilized and cultured in vitro. Embryos were produced in vitro from abattoir derived buffalo oocytes. The cleaved embryos were cocultured with buffalo oviductal epithelial cells and evaluated on day 7 under the phase contrast microscope to classify development. The embryos which reached the morula/blastocyst stage were fast developing, the embryos which were at 16-32 cell stage were medium developing and the embryos below 16 cell stage were slow developing. The embryos which showed some fragmentation in the blastomeres or degenerated blastomeres, were degenerating. Sex of emberyos (n=159) was determined using PCR for amplification of a male specific BRY. 1 (301 bp) and a buffalo specific satellite DNA (216 bp) fragments. The results thus obtained show that 1) X and Y chromosome bearing sperms fertilize oocytes to give almost equal numbers of cleaved XX and XY embryos, 2) male embryos develop faster than female embryos to reach advanced stage and 3) degeneration of buffalo embryos is not linked with the paternal sex chromosome. We suggest that faster development of males is due to differential processing of X and Y chromosome within the zygote for its activation and / or differential expression of genes on paternal sex chromosome sex chromosome during development of buffalo embryos fertilized and cultured in vitro which may be attributed to a combination of genetic and environmental factors.

Rayleigh wave at imperfectly corrugated interface in FGPM structure

  • K. Hemalatha;S. Kumar;A. Akshaya
    • Coupled systems mechanics
    • /
    • v.12 no.4
    • /
    • pp.337-364
    • /
    • 2023
  • The Rayleigh wave propagation is considered in the structure of the functionally graded piezoelectric material (FGPM) layer over the elastic substrate. The elastic substrate loosely bonds the layer through a corrugated interface, whereas its upper boundary is also corrugated but stress-free. Additionally, the solutions for the FGPM layer and substrate are derived using the fundamental variable separable approach to convert the partial differential equation to an ordinary differential equation. The results with boundary conditions lead to dispersion relations for the electrically open and electrically short cases in the determinant form. The outcomes have been numerically analyzed using a specific model. The findings were presented in the form of graphs, which were created using Mathematica 7. Graphs are plotted for variations in wavenumber and phase velocity. The outcomes may help measure interface defects and design Surface Acoustic Wave (SAW) devices.

Characterization of EVA/PCM/Silica Compound using Silica

  • Kim, Tae-Hyun;Choi, Kyung-Man;Lee, Jong-Hwan;Choi, Myeon-Cheon;Kim, Han-Seong
    • Elastomers and Composites
    • /
    • v.56 no.2
    • /
    • pp.72-78
    • /
    • 2021
  • A phase-change material (PCM) is a material that has the ability to delay heat transfer by absorbing heat from its environment or releasing heat to its environment while its phase changes from solid to liquid or liquid to solid at a specific temperature. As it is applied, it can contribute to environmental conservation such as energy savings and carbon dioxide emission reduction. In order for a PCM to store and release heat, the volume change during its phase transition should be large, and thus a phase transition space is required. When a PCM is used as a polymer additive, it is confined within the polymer, and there is no phase transition space; thus, its ability to absorb and release heat is significantly reduced. Therefore, in this study, porous silica was used to provide EVA/PCM compounds with sufficient space for their phase transition, and to improve the compatibility between the EVA and PCM, modified silica is used: surface-modified 5 wt% silica with 3-methacryloxypropyltrimethoxysilane. The compound was prepared and compared with the silica compound. The presence or absence of the modified silica surface modification was confirmed using Fourier-transform infrared spectroscopy and thermogravimetric analysis, the heat capacity of the compound was evaluated based on a differential scanning calorimetry analysis, and its mechanical strength and morphology were determined using scanning electron microscopy.

Hepatic Angiomyolipoma Presenting as a Hyperintense Lesion During the Hepatobiliary Phase of Gadoxetic Acid Enhanced-MRI: a Case Report

  • Jeong, Boryeong;Kim, So Yeon;Kang, Hyo Jeong;Shin, Jinho
    • Investigative Magnetic Resonance Imaging
    • /
    • v.26 no.1
    • /
    • pp.60-65
    • /
    • 2022
  • Gadoxetic acid-enhanced magnetic resonance imaging (MRI) has been widely used to detect and characterize focal hepatic lesions. Because gadoxetic acid is a hepatocyte-specific contrast agent, its patterns during hepatobiliary phase enhancement provide useful information for differential diagnoses of focal hepatic lesions. Hepatic angiomyolipoma (AML) is a rare mesenchymal hepatic neoplasm composed of blood vessels, epithelioid cells, and varying amounts of adipose tissue components. Hepatic AMLs usually show marked hypointensity during the hepatobiliary phase of gadoxetic acid-enhanced MRI as hepatic AMLs are devoid of hepatocytes and fibrotic components. The present study describes a patient with hepatic AML and an atypical imaging feature. This tumor showed hyperintensity during the hepatobiliary phase of gadoxetic acid-enhanced MRI, mimicking hepatocellular tumors such as hepatocellular adenoma. The hepatobiliary hyperintensity of this lesion was likely due to multifocal entrapped hepatocytes resulting from an intrasinusoidal growth pattern of tumor cells and insufficient hepatic parenchymal enhancement during the hepatobiliary phase of gadoxetic acid-enhanced MRI.

Differential Intracellular Localization of Mitotic Centromere-associated Kinesin (MCAK) During Cell Cycle Progression in Human Jurkat T Cells (인체 Jurkat T 세포에 있어서 세포주기에 따른 MCAK 단백질의 세포 내 위치변화)

  • Jun Do Youn;Rue Seok Woo;Kim Su-Jung;Kim Young Ho
    • Journal of Life Science
    • /
    • v.15 no.2 s.69
    • /
    • pp.253-260
    • /
    • 2005
  • Mitotic centromere-associated kinesin (MCAK), which is a member of the Kin I (internal motor domain) subfamily of kinesin-related proteins, is known to play a role in mitotic segregation of chromosome during M phase of the cell cycle. In the present study, we have produced a rat polyclonal antibody using human MCAK (HsMCAK) expressed in E. coli as the antigen. The antibody specifically recognized the HsMCAK protein (81 kDa), and could detect its nuclear localization in human Jurkat T cells and 293T cells by Western blot analysis. The specific stage of the cell cycle was obtained through blocking by either hydroxyl urea or nocodazole and subsequent releasing from each blocking for 2, 4, and 7 h. While the protein level of HsMCAK reached a maximum level in the S phase with slight decline in the $G_{2}-M$ phase, the electrophoretic mobility shift from $p81^{MCAK}\;to\;p84^{MCAK}$ began to be induced in the late S phase and reached a maximum level in the $G_{2}/M $ phase, and then it disappeared as the cells enter into the $G_{1}$ phase. Immunocytochemical analysis revealed that HsMCAK protein localized to centrosome and nucleus at the interphase, whereas it appeared to localize to the spindle pole, centromere of the condensed mitotic DNA, spindle fiber, or midbody, depending on the specific stage of the M phase. These results demonstrate that a rat polyclonal antibody raised against recombinant HsMCAK expressed in E. coli specifically detects human MCAK, and indicate that the electrophoretic mobility shift from $p81^{MCAK}\;to\;p84^{MCAK}$, which may be associated with its differential intracellular localization during the cell cycle, fluctuates with a maximum level of the shift at the $G_{2}-M$ phase.