• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.380-388
• /
• 2014

Annual average daily traffic(AADT) serves as important basic data in the transportation sector. AADT is used as design traffic which is the basic traffic volume in transportation planning. Despite of its importance, at most locations, AADT is estimated using short term traffic counts. An accurate AADT is calculated through permanent traffic counts at limited locations. This study dealt with estimating AADT using various models considering both the spatial correlation and time series data. Kriging models which are commonly used spatial statistics methods were applied and compared with each model. Additionally the External Universal kriging model, which includes explanatory variables, was used to assure accuracy of AADT estimation. For evaluation of various kriging methods, AADT estimation error, proposed using national highway permanent traffic count data, was analyzed and their performances were compared. The result shows the accuracy enhancement of the AADT estimation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.83-91
• /
• 2017

The Manual on Uniform Traffic Control Devices advises that, "Signs should be placed on the right side of the roadway where they are easily recognized and understood by road users." Guidance is provided on the spacing and prioritization of signs, and in some conditions, additional steps may be needed to ensure that signs are conspicuous. This study proposes a design methodology using ergonomics concepts applied to traffic sign and street name signs. Initially, a literature revision on cognitive ergonomics is performed. Several design methodologies are analyzed and the aspects to be considered in traffic signs are selected.. In this study, problems of traffic signs in Korea were identified through the comparative analysis of domestic and foreign traffic signs and a prototype of ergonomic traffic sign was developed based on the analysis results. And the driver's views on the developed traffic sign were investigated. In addition, based on the results of this study, this study is to provide the necessary foundation for improving traffic signs in order to help the various age groups of drivers to reach their destinations without difficulties when they drive.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.3-9
• /
• 2015

Since changes in land use in urban space cause traffic volume and it is closely related to traffic accidents. Therefore, an analysis on the causes of traffic accidents is judged to be an essential factor to establish the measure to reduce traffic accidents. In this regard, the analysis was conducted on the clustering by using the nearest neighbor indexes with regard to the occurrence frequencies of commercial and residential zone based on traffic accident data of the past five years (2009-2013) with the target of local small-medium sized city, Jinju-si. The analysis results, obtained in this study, are as follows: the occurrence frequency of traffic accidents was the highest in spring and the lowest in winter respectively. The clustering of traffic accident occurrence at nighttime was stronger than at daytime. In addition, terms of the analysis on the clustering of traffic accident according to land use, changes according to the seasons was not significant in commercial areas, while clustering density in winter tended to become significantly lower in residential areas. The analysis results of traffic accident types showed that the side-right angle collision of cars was the highest in frequency occurrence, and widespread in both commercial areas and residential areas. These results can provide us with important information to identify the occurrence pattern of traffic accidents in the structure of urban space, and it is expected that they will be appropriately utilized to establish measures to reduce traffic accidents.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.61-67
• /
• 2001

This study aims to develop the Extended Urban Land Information System (EULIS) which can support the sustainable urban management. Although the existing Urban Land Use Information system (ULUIS) that aids the micro-level land use information is a good means for the understanding of urban spatial structure and district-level planning and management (such as urban design, redevelopment planning and district-level transportation planning, etc.), it has some limitations in supplying the information for sustainable urban management, such as environmental and traffic analysis, urban infrastructure's carrying capacity analysis, etc. The EULIS is designed to efficiently supply the information for sustainable urban management. For the successful construction of EULIS, the followings have to be considered. 1) the integration of topographic maps which contain the building's footprints and cadastral maps which contain the parcel's boundary, 2) the integration of EULIS and FM (Facility Management) system for the full utilization of information about capacity analysis of infrastructure, 3) the construction of standardized georeferencing system and spatial unit for the combined use of environment and traffic census data. This study shows 1) why EULIS is needed for the sustainable urban management and which elements are needed for the system,2) the E-R data model for the EULIS, 3) the strategies for the construction of EULIS and 4) the conclusion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.490-492
• /
• 2021

In order to realize a safety society in traffic accidents, Korea prepared comprehensive government-wide measures in 2017. Efforts are being made to minimize accidents while walking by children and the elderly by lowering the speed limit in urban areas from 60 km to 50 km and limiting the vehicle to 30 km in the case of child protection zones. In this study, after pre-processing each data with the status of vehicle registration and traffic accident spatial data (GIS) by designating a specific area, Danyang-gun, where the rate of child traffic accidents is increasing every year, it is intended to understand the structure of the data and find out the structural pattern of the data analytical studies were conducted.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.253-256
• /
• 2005

The use of satellite remote sensing in maritime safety and security can aid in the detection of illegal fishing activities and provide more efficient use of limited aircraft or patrol craft resources. In the area of vessel traffic monitoring for commercial vessels, Vessel Traffic Service (VTS) which use the ground-based radar system have some difficulties in detecting moving ships due to the limited detection range. A virtual vessel traffic control system is introduced to contribute to prevent a marine accident such as collision and stranding from happening. Existing VTS has its limit. The virtual vessel traffic control system consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress based on the satellite data, remotely sensed data. And it could be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If environmental stress values are simulated for the ship information derived from satellite data, proper actions can be taken to prevent accidents. Since optical sensor has a high spatial resolution, JERS satellite data are used to track ships and extract their information. We present an algorithm of automatic identification of ship size and velocity. This paper lastly introduce the field testing results of ship detection by RADARSAT SAR imagery, and propose a new approach for a Vessel Monitoring System(VMS), including VTS, and SAR combination service.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.159-163
• /
• 2002

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.11
• /
• pp.4483-4501
• /
• 2020

Recent findings identified the scatter and shape of MFD (macroscopic fundamental diagram) is heavily influenced by the spatial distribution of link density in a road network. This implies that the concept of MFD can be utilized to divide a heterogeneous road network with different degrees of congestion into multiple homogeneous subnetworks. Considering the actual traffic data is usually incomplete and inaccurate while most traffic partition algorithms rely on the completeness of the data, we proposed a three-step partitioned algorithm called Iso-MB (Isoperimetric algorithm - Merging - Boundary adjustment) permitting of incompletely input data in this paper. The proposed algorithm was implemented and verified in a simulated urban transportation network. The existence of well-defined MFD in each subnetwork was revealed and discussed and the selection of stop parameter in the isoperimetric algorithm was explained and dissected. The effectiveness of the approach to the missing input data was also demonstrated and elaborated.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.47-54
• /
• 2021

The number of freeway traffic accidents in Korea is about 4,000 as of 2020, and deaths per traffic accident is about 3.7 times higher than other roads due to non-recurring congestion and high driving speed. Most of the accident types on freeways are side and rear-end collisions, and one of the main factors is hazard traffic flow caused by merge, diverge and accidents. Therefore, the hazard traffic flow, which appears in a continuous flow such as a freeway, can be said to be important information for the driver to prevent accidents. This study tried to classify hazard traffic flows, such as the speed change point and the section where the speed difference by lane, using individual vehicle information. The homogeneous segment of speed was classified using spatial separation based on geohash and space mean speed that can indicate the speed difference of individual vehicles within the same section and the speed deviation between vehicles. As a result, I could extract the diverging influence segment and the hazard traffic flow segment that can provide dangerous segments information of freeways.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.40-51
• /
• 2021

The purpose of this study is to diagnose urban spatial structures using spatial modeling techniques for balanced urban development as part of sustainable urban growth management. Since urban spatial structure is an interaction of various activities, it is necessary to interpret the analysis results in conjunction with the analysis of changes in spatial structural elements. In this study, population and transportation were approached for research purposes. Population data were applied to the Getis-Ord G_i^* method, a spatial statistical technique, to analyze the concentration-decreasing region of the population. Traffic data analyzed the trend of centrality change by applying commuting traffic O-D data to Social Network Analysis techniques. The analysis showed that urban imbalance was growing, and the centrality of transportation was changing. The results of the analysis of spatial structure elements could be interpreted by linking the results of each factor to each neighborhood unit, predicting changes in urban spatial structure and suggesting directions for sustainable urban growth management.These results could also be used as a decision-making tool for various urban growth management policies introduced to cope with rapid urban development and uncontrollable development in many cities around the world.