• Proceedings of the KSEG Conference
• /
• 2003.04a
• /
• pp.153-158
• /
• 2003

Traditionally, the statistical methods has been used to analyze the relationship between landslide occurrence and related factors(soil depth, soil strength, slope angle, vegetation, etc.) in GIS technique. However, the method have no mechanical meaning. Therefore, the mechanical model is suggested in this research. The method analyzes the mechanical equilibrium of a potential slide block and then calculates a slope safety factor. Since this method is able to consider the balance of forces applied to the slope and is a more reasonable method for an individual site. In this research, the spatial data is obtained, managed and analyzed using GIS technique, and the infinite slope model is used to evaluate factor of safety and analyze the slope stability.

• Spatial Information Research
• /
• v.22 no.1
• /
• pp.9-17
• /
• 2014

This study was intended to reliably predict the traffic green house gas emission in Daegu with the use of spatial statistical technique and calculate the traffic green house gas emission of each administrative district on the basis of the accurately predicted emission. First, with the use of the traffic actually surveyed at a traffic observation point, and traffic green house gas emission was calculated. Secondly, on the basis of the calculation, and with the use of Universal Kriging technique, this researcher set a suitable variogram modeling to accurately and reliably predict the green house gas emission at non-observation point suitable through spatial correlation, and then performed cross validation to prove the validity of the proper variogram modeling and Kriging technique. Thirdly, with the use of the validated kriging technique, traffic green gas emission was visualized, and its distribution features were analyzed to predict and calculate the traffic green house gas emission of each administrative district. As a result, regarding the traffic green house gas emission of each administration, it was found that Bukgu had the highest green house gas emission of $291,878,020kgCO_2eq/yr$.

• Environmental Engineering Research
• /
• v.21 no.3
• /
• pp.226-232
• /
• 2016

Rainfall is one of crucial factors that impact on our environment. Rainfall data is important in water resources management, flood forecasting, and designing hydraulic structures. However, it is not available in some rural watersheds without rain gauges. Thus, effective ways of interpolating the available records are needed. Despite many widely used spatial interpolation methods, few studies have investigated rainfall center characteristics. Based on the theory that the spatial distribution of convective rainfall event has a definite center with maximum rainfall, we present a mathematical interpolation method to estimate convective rainfall distribution and indicate the rainfall center location and the center rainfall volume. We apply the method to estimate three convective rainfall events in Santa Catalina Island where reliable hydrological data is available. A cross-validation technique is used to evaluate the method. The result shows that the method will suffer from high relative error in two situations: 1) when estimating the minimum rainfall and 2) when estimating an external site. For all other situations, the method's performance is reasonable and acceptable. Since the method is based on a continuous function, it can provide distributed rainfall data for distributed hydrological model sand indicate statistical characteristics of given areas via mathematical calculation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.11-18
• /
• 2005

In this paper, we proposed a video watermarking algerian based on wavelet transform using statistical characteristic of video according to the energy distribution and the spread spectrum technique. In the proposed method, the original video is splitted by spatial difference metric and classified into the motion region and the motionless region according to the motion degree. The motion region is decomposed into 3-levels using 3D DWT and the motionless region is decomposed into 2-levels using 2D DWT The baseband of the wavelet-decomposed image is not utilized because of the image quality. So that the standard deviation of the highest subband coefficients except for the baseband is used to determine the threshold. Binary video watermarks preprocessed by the random permutation and the spread spectrum technique are embedded into selected coefficients. In computer experiments, the proposed algorithm was found to be more invisible and robust than the conventional algorithms.

• Korean Journal of Remote Sensing
• /
• v.9 no.1
• /
• pp.1-19
• /
• 1993

A simple bispectral threshold technique which reflects the temporal and spatial characteristics of the analysis area has been developed to classify the cloud type and estimate the cloud cover from GMS/S-VISSR(Stretched Visible and Infrared Spin Scan Radiometer) imagery. In this research, we divided the analysis area into land and sea to consider their different optical properties and used the same time observation data to exclude the solar zenith angle effects included in the raw data. Statistical clear sky radiance(CSRs) was constructed using maximum brightness temperature and minimum albedo from the S-VISSR imagery data during consecutive two weeks. The CSR used in the cloud anaysis was updated on the daily basis by using CSRs, the standard deviation of CSRs and present raw data to reflect the daily variation of temperature. Thresholds were applied to classify the cloud type and estimate the cloud cover from GMS/S-VISST imagery. We used a different thresholds according to the earth surface type and the thresholds were enough to resolve the spatial variation of brightness temperature and the noise in raw data. To classify the ambiguous pixels, we used the time series of 2-D histogram and local standard deviation, and the results showed a little improvements. Visual comparisons among the present research results, KMA's manual analysis and observed sea level charts showed a good agreement in quality.

• Spatial Information Research
• /
• v.10 no.1
• /
• pp.77-92
• /
• 2002

In order to prevent indiscreet urban growth and harmonize urban development with environmental preservation, it is strongly required in Korea that urban planning should be reasonable and transparent. From this societal demand, the urban planning system was changed to be strengthened for the establishment of harmonious land-use order in urban space. However, implementation of the urban planning system demands a lot of information to analyze and estimate the present condition and problems of urban area. For this purpose, the information should quickly be collected, managed and analyzed. The urgent demand of information in urban planning field is able to be fulfilled with recent GIS and its relevant information technique, which can quickly, accurately and conveniently collect various spatial and statistical information, systematically analyze and manage them, and visually present the result of spatial analysis. This study suggested a urban planning information system and its basic implementing scheme to support the urban planning system with GIS and presented a development model of the urban planning information system using the recent GIS and its relevant information technique.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2013

Motion-compensated frame interpolation (MCFI) techniques in video signal processing have many application areas. Frame rate up-conversion (FRUC) or distributed video coding (DVC) technique needs an effective MCFI algorithm. For these applications, it is necessary to develop an effective post-processing technique to improve visual qualities or to reduce virtual channel noises, resulting in the reduced channel bit rate. This paper proposes a reliability evaluation method based on spatio-temporal characteristics for motion-compensated interpolated blocks. The proposed algorithm investigates the temporal matching characteristics for current frame and then is designed in such a way that it can measure temporal characteristics as well as the spatial ones. Through computer simulations, it is shown that the proposed method outperforms the conventional temporal matching method.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.149-162
• /
• 2018

It is necessary to select the appropriate global climate model (GCM) to take into account the impacts of climate change on integrated water management. The objective of this study was to develop the selection technique of representative GCMs for uncertainty in climate change scenario. The selection technique which set priorities of GCMs consisted of two steps. First step was evaluating original GCMs by comparing with grid-based observational data for the past period. Second step was evaluating whether the statistical downscaled data reflect characteristics for the historical period. Spatial Disaggregation Quantile Delta Mapping (SDQDM), one of the statistical downscaling methods, was used for the downscaled data. The way of evaluating was using explanatory power, the stepwise ratio of the entire GCMs by Expert Team on Climate Change Detection and Indices (ETCCDI) basis. We used 26 GCMs based on CMIP5 data. The Representative Concentration Pathways (RCP) 4.5 and 8.5 scenarios were selected for this study. The period for evaluating reproducibility of historical period was 30 years from 1976 to 2005. Precipitation, maximum temperature, and minimum temperature were used as collected climate variables. As a result, we suggested representative 13 GCMs among 26 GCMs by using the selection technique developed in this research. Furthermore, this result can be utilized as a basic data for integrated water management.

• The KIPS Transactions:PartB
• /
• v.11B no.4
• /
• pp.403-410
• /
• 2004

Recently, studies of image analysis, as the preprocessing stage for medical image analysis or image retrieval, are actively carried out. This paper intends to propose a way of utilizing color components for image retrieval. For image retrieval, it is based on color components, and for analysis of color, CLCM (Color Level Co-occurrence Matrix) and statistical techniques are used. CLCM proposed in this paper is to project color components on 3D space through geometric rotate transform and then, to interpret distribution that is made from the spatial relationship. CLCM is 2D histogram that is made in color model, which is created through geometric rotate transform of a color model. In order to analyze it, a statistical technique is used. Like CLCM, GLCM (Gray Level Co-occurrence Matrix)[1] and Invariant Moment [2,3] use 2D distribution chart, which use basic statistical techniques in order to interpret 2D data. However, even though GLCM and Invariant Moment are optimized in each domain, it is impossible to perfectly interpret irregular data available on the spatial coordinates. That is, GLCM and Invariant Moment use only the basic statistical techniques so reliability of the extracted features is low. In order to interpret the spatial relationship and weight of data, this study has used Principal Component Analysis [4,5] that is used in multivariate statistics. In order to increase accuracy of data, it has proposed a way to project color components on 3D space, to rotate it and then, to extract features of data from all angles.

• The Journal of Fisheries Business Administration
• /
• v.52 no.1
• /
• pp.23-46
• /
• 2021

The purpose of this study is to understand the production efficiency of individual fishing communities and provide directions for improvement. The subject of the study is aquaculture type Ochon-Gye in Goheung-gun. The analysis method used bootstrap-DEA to overcome the statistical reliability problem of the traditional DEA analysis technique. In addition, data mining-GIS was applied to identify the spatial productivity of fishing communities. The values of technology efficiency, pure technology efficiency, and scale efficiency were estimated for 32 aquaculture-type fishing villages. Then, using the benchmarking reference set and weights, the projection was presented through adjustment of the input factor excess, and furthermore, the confidence interval of the efficiency values considering statistical significance was estimated using bootstrap.