• 한국광학회지
• /
• 제2권2호
• /
• pp.83-88
• /
• 1991

공간불변(space-invariant) 패턴인식에 대한 연구는 여러 접근방식에서 많은 시도가 이루어지고 있다. 학습 이미지의 가중치 선형조합(weighted linear summation)에 의한 SDF(synthetic discriminant function) 필터를 이용한 패턴인식은 그 중의 한 방식으로서 꾸준히 많은 관심을 받고 있다. 본 논문에서는 off-axis 평면기준파의 각분할(angular multiplexing) 방식과 pseude-inverse 알고리듬에 의한 pSDF 필터를 결합하여 상관기를 구성하고 상관면에서의 상관반응을 관측하여, off-axis pSDF 공간정합필터가 유형분류에 유용함을 입증하고, 광상관기로의 적용가능성을 보여주고자 한다.

• 대한의용생체공학회:의공학회지
• /
• 제27권1호
• /
• pp.22-29
• /
• 2006

This paper proposes an efficient array beamforming method using spatial matched filtering for ultrasound imaging. In the proposed method, ultrasound waves are transmitted from an array subaperture with fixed transmit focus as in conventional array imaging. At receive, radio frequency (RF) echo signals from each receive channel are passed through a spatial matched filter that is constructed based on the system transmit-receive spatial impulse response. The filtered echo signals are then summed. The filter remaps and spatially registers the acoustic energy from each element so that the pulse-echo impulse response of the summed output is focused with acceptably low side lobes. Analytical beam pattern analysis and simulation results using a linear array show that the proposed spatial filtering method can provide more improved spatial resolution and contrast-to-noise ratio (CNR) compared with conventional dynamic receive focusing (DRF) method by implementing two-way dynamically focused beam pattern throughout the field.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.62-70
• /
• 1997

In this paper, we presetn a new method to display 3-D image modelled as a sum of 2-D sliced images by expanding the concept of the conventional 2-D optical correlator based on spatial matched filtr to the 3-D region. It is hsown that a arbitrary image can be constructed by an array of the correlation-peaks between pixel-to-pixel and propose the systhesis precedure of 3-D spatial-matched-fjilter using fresnel diffraction equation to display 3-D image in space. It is also shown that the quantization problem is severe when the systehsised filter function is displayed on the conventional LC-SLM. To overcome this problem, anonlinear quantizaton method using the sigmoid function is suggested, and this method can reduce the bias and the loss of high spatial-frequency information, and improve the diffraction efficiency. Finally, the suggested method is tested by computer simulation and then approved by some optical experiments with the conventional LC-SLM.

• 전자공학회논문지A
• /
• 제29A권7호
• /
• pp.48-55
• /
• 1992

In this paper, fSDF/POF, BPOF spatial matched filters are designed and implemented by CGH. The correlation characteristics for the suggested filters are analyzed for the distorted input images. Input patterns are obtained from the out-of-plane aircraft images by gradually rotating it, and then used for SDF training images. Modified version of LCD is used for a real-time input device of an optical correlator, and CGH-based fSDF filters are fabricated on film mask for spatial matched filter in order to recognize the distorted images. Total optical corrlator system size is effectively reduced to 148.8 cm by using lens combinations. Computer simulations and experimental results show that the suggested phase filters have nearly uniform correlation characteristics and have good classification capabilities between two classes.

• 한국음향학회지
• /
• 제23권4호
• /
• pp.288-295
• /
• 2004

천해는 속도가 빠르고 강한 간섭표적으로 인하여 신호단편 (snapshot) 수가 제한되어 인접한 느리고 약한 표적을 탐지하기 어려운 환경이다. 천해환경에서 적응정합장처리에 적용하여 고소음의 간섭표적의 효과를 줄일 수 있는 도파관 공간의 간섭표적 필터링 기법을 제안하였다. 이를 위하여 NDC (null direction constraint)를 적용한 MCM (multiple constraint method) 기법을 새로운 공간간섭 필터로 제안하였다. NDC는 복제음장을 이용하여 CSDM (cross-spectral density matrix)에 포함되어있는 강한 소음원 성분을 강제적으로 걸러줌으로서, 부엽 준위가 낮아지고 저소음표적 신호의 이득을 복원시킨다. 이 기법을 Pekeris 도파관에서의 시뮬레이션 및 동해에서 수행한 정합장처리 실험인 HAPLE03 (matched acoustic properties and localization experiment)의 수직선배열 자료에 적용하였으며, 그 결과 인접한 저소음 표적의 SBNR (signal-to-background-and-noise ratio)이 MVDR (minimum variance distortionless response)과 NSP (null space projection) 보다 향상되었다.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.107-112
• /
• 2016

Most of the indoor positioning algorithms based on magnetic data mainly focus on reducing the accumulated error of the odometry data, such as signals produced by the inertial sensors. However, in most cases such as positioning by using smartphones in the indoor environment, those approaches seem unfeasible due to the absence of the inertial sensors. Thus, in this paper, we try to study a positioning algorithm exclusively based on the magnetic data. We refer to some thinking from the steps of Particle Filter and conduct an experiment to verify the application of the new algorithm. Besides, we use the variance of the result of the previous step to decrease the area to be matched in the next step, intending to improve the accuracy of the results. The result of the experiment shows that the new algorithm has a high probability to match with accuracy less than 2 meters in a 24 meters by 2.6 meters corridor.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.439-443
• /
• 2019

To improve the noise characteristics, software-based noise reduction algorithms are widely used in cadmium zinc telluride (CZT) pixelated semiconductor gamma camera system. The purpose of this study was to develop an improved median filtering algorithm using a thresholding method for noise reduction in a CZT pixelated semiconductor gamma camera system. The gamma camera system simulated is a CZT pixelated semiconductor detector with a pixel-matched parallel-hole collimator and the spatial resolution phatnom was designed with the Geant4 Application for Tomography Emission (GATE). In addition, a noise reduction algorithm with a median filter using an improved thresholding method is developed and we applied our proposed algorithm to an acquired spatial resolution phantom image. According to the results, the proposed median filter improved the noise characteristics compared to a conventional median filter. In particular, the average for normalized noise power spectrum, contrast to noise ratio, and coefficient of variation results using the proposed median filter were 10, 1.11, and 1.19 times better than results using conventional median filter, respectively. In conclusion, our results show that the proposed median filter using improved the thresholding method results in high imaging performance when applied in a CZT semiconductor gamma camera system.

• 한국음향학회지
• /
• 제3권2호
• /
• pp.13-22
• /
• 1984

A surface acoustic wave signal processing device using the silicon surface state is presented and shown capable of storing a reference signal and later correlating another signal with the stored reference. The device memory consists of the storage of the spatial 2k pattern of an acoustic wave as stored charges in the surface state of silicon surface. Results of experiments are presented which characterize the operation of device. Simpliied models for charging process and nonlinear acoustoelectric interactions based on consideration of single surface state at the surface of silicon The validity of simplified model has been qualitatibely confirmed with experimental results and the application of this device to aprogrammable matched filter of communication is considered.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.547-550
• /
• 2001

Through matched filtering synthetic aperture radar (SAR) produces high-resolution imagery from data collected by a relative small antenna. While the impulse response obtained by the matched filter approach produces the best achievable signal-to-noise ratio, large sidelobes must be reduced to obtain higher-resolution SAR images. So, many enhancement methods of SAR imagery have been proposed. As a deconvolution method, the phase-extension inverse filtering is based on the characteristics of the matched filtering used in SAR imaging. It improves spatial resolution as well as effectively suppresses the sidelobes with low computational complexity. In the phase-extension inverse filtering, the impulse response is obtained from simulation with a point target. But in a real SAR environment, for example ERS-1, the impulse response is distorted by many non-ideal factors. So, in the phase-extension inverse filtering for a real SAR processing, the magnitudes of the frequency transfer function have to be compensated to produce more desirable results. In this paper, an estimation method to obtain a more accurate impulse response from a real SAR image is studied. And a compensation scheme to produce better performance of the phase-extension inverse filtering is also introduced.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권11호
• /
• pp.5624-5638
• /
• 2016

A novel method based on Surf points is proposed to detect and lock-track single ground target in aerial videos. Videos captured by moving cameras contain complex motions, which bring difficulty in moving object detection. Our approach contains three parts: moving target template detection, search area estimation and target tracking. Global motion estimation and compensation are first made by grids-sampling Surf points selecting and matching. And then, the single ground target is detected by joint spatial-temporal information processing. The temporal process is made by calculating difference between compensated reference and current image and the spatial process is implementing morphological operations and adaptive binarization. The second part improves KALMAN filter with surf points scale information to predict target position and search area adaptively. Lastly, the local Surf points of target template are matched in this search region to realize target tracking. The long-term tracking is updated following target scaling, occlusion and large deformation. Experimental results show that the algorithm can correctly detect small moving target in dynamic scenes with complex motions. It is robust to vehicle dithering and target scale changing, rotation, especially partial occlusion or temporal complete occlusion. Comparing with traditional algorithms, our method enables real time operation, processing $520{\times}390$ frames at around 15fps.