• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.274-280
• /
• 2002

This paper addresses the vibration mode shape measurement technique utilizing a Continuous Scanning Laser Doppler Vibrometer (CSLDV). The continuous scanning capability is added to the conventional discrete Laser Doppler Vibrometer by reflecting the laser beams on the surface of the object using two oscillating mirrors. The bow scanning resulted from the proposed scanning method is eliminated by feedback control. The velocity output signal from the CSLDV is modulated to give the spatial velocity distribution in terms of coefficients which are obtained from the Fast Fourier Transformation of the time dependent velocity signal. Using the Chebyshev series form, the analysis of the vibration mode shape techniques for straight Bine scanning and 2 dimensional scanning are presented and discussed. The performance of the proposed SLDV is presented using the experimental results of the vibration mode shape of a plate

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.661-666
• /
• 2000

Near-wake flow field of a circular cylinder is studied by means of a cinematic PIV system with high sampling rate and large internal memory block. Experiments are conducted in a closed-cycle water tunnel system and a cross-correlation algorithm in conjunction with FFT (Fast Fourier Transform) analysis and an offset correlation technique is used for vector processing. With the help of very high sampling frequency compared to the shedding frequency, it is possible to obtain phase-averaged information of the three-dimensional wake, even though the shedding is not forced but natural. Phase-locked vortical structures observed simultaneously from the spanwise and cross-stream planes are displayed in the wake-transition regime where fine-scale secondary vortices have a spanwise wavelength or around one diameter. Spatial relations and temporal evolutions of the primary Karman vortex and the secondary vortex are also discussed schematically.

• Nuclear Engineering and Technology
• /
• v.31 no.1
• /
• pp.80-87
• /
• 1999

An analytic axial xenon oscillation model was developed for pressurized water reactor analysis. The model employs an equation system for axial difference parameters that was derived from the two-group one-dimensional diffusion equation with control rod modeling and coupled with xenon and iodine balance equations. The spatial distributions of nu, xenon, and iodine were expanded by the Fourier sine series, resulting in cancellation of the flux-xenon coupled non-linearity. An inhomogeneous differential equation system for the axial difference parameters, which gives the relationship between power, iodine and xenon axial differences in the case of control rod movement, was derived and solved analytically. The analytic solution of the axial difference parameters can directly provide with the variation of axial power difference during xenon oscillation. The accuracy of the model is verified by benchmark calculations with one-dimensional reference core calculations.

• Journal of The Korean Astronomical Society
• /
• v.28 no.2
• /
• pp.223-243
• /
• 1995

We describe the implementation of a multi-dimensional numerical code to solve the equations for idea! magnetohydrodynamics (MHD) in cylindrical geometry. It is based on an explicit finite difference scheme on an Eulerian grid, called the Total Variation Diminishing (TVD) scheme, which is a second-order-accurate extension of the Roe-type upwind scheme. Multiple spatial dimensions are treated through a Strang-type operator splitting. Curvature and source terms are included in a way to insure the formal accuracy of the code to be second order. The constraint of a divergence-free magnetic field is enforced exactly by adding a correction, which involves solving a Poisson equation. The Fourier Analysis and Cyclic Reduction (FACR) method is employed to solve it. Results from a set of tests show that the code handles flows in cylindrical geometry successfully and resolves strong shocks within two to four computational cells. The advantages and limitations of the code are discussed.

• Structural Engineering and Mechanics
• /
• v.54 no.4
• /
• pp.623-648
• /
• 2015

A numerical approach is presented for the analysis of the forced vibration of a rigid surface foundation with arbitrary shape. In the analysis, the foundation is discretized into a number of sub squaree-lements. The dynamic response within each sub-element is described by the Green's function, which is obtained by the Fourier-Bessel transform and Precise Integration Method (PIM). Incorporating the displacement boundary condition and force equilibrium of the foundation, it obtains a system of linear algebraic equation in terms of the contact forces within each sub-element. Solving the equation leads to the desired dynamic impedance functions of the foundation. Numerical results are obtained for foundation not only with simple geometrical configurations, such as rectangular and circular foundation, but also the case of irregularly shaped foundation. Several comparisons between the proposed approach and other methods are made. Very good agreement is reached. Also, parametric studies are carried out on the dynamic response of foundation. Addressed in this study are the effects of Poisson's ratio, material damping and contact condition of soil-foundation interface. Several conclusions are drawn the significance of the factors.

• Journal of KIISE:Software and Applications
• /
• v.26 no.2
• /
• pp.297-305
• /
• 1999

본 논문에서는 컴퓨터를 사용한 이진 위상 홀로그램의 설계시 요구되는 조합 최적화 문제(combinatorial optimization problem)를 유전자 알고리즘을 사용하여 해결하고자한다. 이진 위상 홀로그램의 설게는 출력 면에서 원하는 이미지를 생성하기 위하여 홀로그램의 각 셀에 이진 위상을 결정하는 것으로 최적화 문제로 귀착된다. 유전자 알고리즘을 이진 위상 홀로그램 설계에 효율적으로 적용하기 위하여 이차원 염색체 부호화 및 주기성을 고려한 교차 연산자등을 사용하면, 그 결과 홀로그램 설계시 요구되는 이차원 퓨리에 변환(Fourier transform)을 자연스럽고 효율적인 방법으로 수행할수 있다. 유전자 알고리즘을 사용하여 구한 최적의 이진 위상 배열로 공간 빛 변조기(spatial light modulator, SLM)를 이용하여 광학적으로 이미지를 재생하고, 재생된 광학 이미지는 원하는 이미지와 거의 일치함을 보인다.

• Proceedings of the KSEEG Conference
• /
• 2000.04b
• /
• pp.308-310
• /
• 2000

Sampling rates become inconsistent when spatial data in spherical coordinate are re-sampled with respect latitudinal or longitudinal degree for mathematical processes such as Fourier Transfrom, and this results in the distrtions of the processed data in the wavenmber domain. This distortions are more evident in the polar regions. An example is presented to show such distortions during the recovery process of free-air gravity anomalies from ERSI radar atimeter data in Russian Arctic Barents Sea, and a method is present to minimize the distortion using Lambect Conformal Conic map projection.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.111-114
• /
• 1996

Mucociliary transport is one of the essential defensive functions of the airway mucosa. In this paper, the objective and quantitative method of measuring CBF(Ciliary Beat Frequency) was developed based on the image processing method. Microscopic ciliary images are acquired through image processing board inside PC, and data necessary for the FFT(Fast Fourier Transform) analysis are extracted. By means of FFT analysis, maximum peak frequencies are found in each divided block of a whole acquired image. Finally using these frequencies, we compose a frequency map showing the spatial distribution of CBF's.

• 한국지형공간정보학회:학술대회논문집
• /
• 1994.10a
• /
• pp.42-46
• /
• 1994

In this paper, we studied on an efficient detection and removal of the periodic scanner interference noise in LANDSAT images. Firstly, noise models and their characteristics are discussed. And we proposed a new scheme of noise detection in Fourier domain. Then, an dfficient noise filter can be designed based on the detected noise components. To verifythe effectiveness of our scheme, some experiments guided by our proposed scheme are performed using a real LANDSAT image.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.191-197
• /
• 2021

The anomalous propagation characteristics of a single Airy beam in nonlocal nonlinear medium are investigated by utilizing the split-step Fourier-transform method. We show that besides the normal straight propagation trajectory, the breathing solitons formed by the interaction between Airy beam and nonlocal nonlinear medium can propagate along the sinusoidal trajectory, and the anomalous trajectory can be modulated arbitrarily by altering the initial amplitude and the nonlocal nonlinear coefficient. In addition, the initial amplitude and the nonlocal nonlinear coefficient can have inverse impacts on the formation and transformation of the equilibrium state of spatial solitons, when the two parameters are larger than certain values. Therefore, the reversible transformation of the evolution dynamics of two soliton states can be realized by adjusting those two parameters properly. Finally, it is shown that the propagation properties of the solitons formed by the interaction between Airy beam and nonlocal nonlinear medium can be controlled arbitrarily, by adjusting the distribution factor and nonlocal coefficient.