• Spatial Information Research
• /
• v.21 no.5
• /
• pp.73-82
• /
• 2013

In recent years, according to the increase of interests in indoor space, various researches are being carried out for the construction and services of indoor spatial information. BIM data is very useful to build indoor spatial information. Accordingly, many studies for the use of BIM data on GIS part are in progress. In order to take advantage of BIM data on GIS part, the conversion technology for building indoor data and visualization techniques are required. However, most of the previous researches are focused on the conversion technology to construct indoor spatial information by importing BIM data into GIS applications while there is few research on visualization. In this study, an indoor LOD(Level of Detail) model is proposed to apply to on indoor facility management system when indoor data was constructed based on BIM data for the linkage between BIM and GIS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.2
• /
• pp.82-102
• /
• 2008

Packet losses tend to occur during short error bursts separated by long periods of relatively error-free transmission. There is also a significant spatial correlation in loss among the receiver nodes in a multicast session. To recover packet transmission errors at the transport layer, tree-based protocols construct a logical tree for error recovery before data transmission is started. The current tree construction scheme does not scale well because it overloads the sender node. We propose a scalable recovery tree construction scheme considering these properties. Unlike the existing tree construction schemes, our scheme distributes some tasks normally handled by the sender node to specific nodes acting as repair node distributors. It also allows receiver nodes to adaptively re-select their repair node when they experience unacceptable error recovery delay. Simulation results show that our scheme constructs the logical tree with reduced message and time overhead. Our analysis also indicates that it provides fast error recovery, since it can reduce the number of additional retransmissions from its upstream repair nodes or sender node.

• Spatial Information Research
• /
• v.5 no.2
• /
• pp.195-198
• /
• 1997

The his paper describes Management System of Environment GIS Data using JVM, JDBC, Oracle DB. Environment GIS data using the system are satellite Image, Thematic Map, GIS Data. The data have spatial information and attribute information. The search supplies spatial search using viewing-map on Web browser, nonspatial search using the attributes of data. The registration of data use the registration system of data on Web browser.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.173-179
• /
• 2003

Techniques to rapidly model local spaces, using 3D range data can enable implementation of: (1) real-time obstacle avoidance for improved safety, (2) advanced automated equipment control modes, and (3) as-built data acquisition for improved quantity tracking, engineering, and project control systems. The objective of the research reported here was to introduce current rapid local modeling techniques and develop rapid local spatial modeling tools.

• Journal of Korea Multimedia Society
• /
• v.22 no.9
• /
• pp.1122-1131
• /
• 2019

This paper covers research on terrain construction for unmanned aerial vehicle simulators using spatial information that was distributed by public institutions. Aerial photography, DEM, vector maps and 3D model data were used in order to create a realistic terrain simulator. A data converting method was suggested while researching, so it was generated to automatically arrange and build city models (vWorld provided) and classification methods so that realistic images could be generated by 3D objects. For example: rivers, forests, roads, fields and so on, were arranged by aerial photographs, vector map (land cover map) and terrain construction based on the tile map used by DEM. In order to verify the terrain data of unmanned aircraft simulators produced by the proposed method, the location accuracy was verified by mounting onto Unreal Engine and checked location accuracy.

• Advances in aircraft and spacecraft science
• /
• v.10 no.6
• /
• pp.545-554
• /
• 2023

The widespread introduction of unmanned aircrafts has led to the understanding of the need to organize a common information space for manned and unmanned aircrafts, which is reflected in the Russian Unmanned aircraft system Traffic Management (RUTM) project. The present article deals with the issues of spatial information database (DB) organization, which is the core of RUTM and provides storage of various data types (spatial, aeronautical, topographical, meteorological, vector, etc.) required for flight safety management. Based on the analysis of functional capabilities and types of work which it needs to ensure, the architecture of spatial information DB, including the base of source information, base of display settings, base of vector objects, base of tile packages and also a number of special software packages was proposed. The issues of organization of these DB, types and formats of data and ways of their display are considered in detail. Based on the analysis it was concluded that the optimal construction of the spatial DB for RUTM system requires a combination of different model variants and ways of organizing data structures.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.63-70
• /
• 2011

The national spatial information systems project which is promoted by our country has been extended from existing 2-D geographic information to 3-D spatial information as the basic geo-spatial Information. Most of the construction of the ground geo-spatial information are completed or underway, on the other hand, the construction of the subsurface geo-spatial information has difficulty caused by the lack of the drilling data characterizing the subsurface. In terms of the construction of the geo-spatial information of the subsurface, the subsurface information is constructed and managed by the domestic institutions, but the subsurface information which is possessed by the institutions was not shared mutually so it is managed inefficiently. This study presented the 3-D national underground information DB design by dividing with the ground DB item which configures the state of the ground and the soil DB item which configures the state of the soil in order to increase the efficiency of the construction of the subsurface spatial information. The implementation & utilization of the national underground information application technology was reviewed by applying the constructed DB to the actual model area, and the national underground information knowledge-based community establishment plan was presented.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.6
• /
• pp.57-65
• /
• 2014

Recently, Construction business is changing from on the ground to underground space because of deficit of developing space, creation of green space and of incremental of land compensation expenses. Meanwhile, 3D Topographic, Marine and Cadastral maps need to have Spatial Interrelation. Also, understanding of the information is also needed. Spatial information object registration system is impossible to contact and understanding intelligence mutually because the former one is managed as automatic ID system. Therefore, 3D Object information ID System of underground space is managed based on Object Identifier. Construction of Spatial information integration ID System is required and it will offer Division Code (Ground, Index, Underground) and depth information. We are defined and classified Under Spatial Information in this paper. Moreover, we developed the integration ID System based on UFID for cadastral information Construction. We supposed underground spatial information DB Construction and a developed the way of exploiting 3D cadastral information system through the study. The research result will be the base data of Standard ID system, DB Construction and system Development of National spatial data which is considered together with spatial interrelation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.381-392
• /
• 2021

In this study, we perform deep learning-based object detection analysis on eight types of buildings defined by the digital map topography standard code, leveraging images taken with UAV (Unmanned Aerial Vehicle). Image labeling was done for 509 images taken by UAVs and the YOLO (You Only Look Once) v5 model was applied to proceed with learning and inference. For experiments and analysis, data were analyzed by applying an open source-based analysis platform and algorithm, and as a result of the analysis, building objects were detected with a prediction probability of 88% to 98%. In addition, the learning method and model construction method necessary for the high accuracy of building object detection in the process of constructing and repetitive learning of training data were analyzed, and a method of applying the learned model to other images was sought. Through this study, a model in which high-efficiency deep neural networks and spatial information data are fused will be proposed, and the fusion of spatial information data and deep learning technology will provide a lot of help in improving the efficiency, analysis and prediction of spatial information data construction in the future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.89-100
• /
• 2006

Recently the dramatical development of domestic spatial information technology and the successful construction of Korea NGIS(Nation Geographic Information System) have been the foundation of the scientific national territory utilization and management. However, there still exists the original problems to construct the thematic maps for supporting the various administrative services because administrative officials tend to depend on paper maps and inventories to generate spatial information, process, upgrade and manage. In this situation, there is a greater need to develop GIS system for the effective construction of various thematic maps. In this study, the satellite image based high accurate e-thematic construction and management system was developed to support the forest administrative service such as generating user based forest thematic maps, modifying them, analyzing and outputting through GIS, GPS and satellite images. For the case study, the previous forest paper map of Jeju Island was converted in format of raster and vector data using satellite images to maintain more exact location information so that this system helps to manage domestic spatial information scientifically and effectively within shorter time then support the standard for domestic spatial information. Moreover, this system plays the role of DSS(Decision Supporting System) for forest administrative affairs by integrating the attribute data, managing the GPS data and linking the multimedia data. For this, the additional main objective of this study was acquired powerful GIS component, which is called as e-mapping component, so that it could be regarded as enabling interoperability and reusability within this application. For the future works, the essential element idea and technology in this study could be applied very usefully to other official works such as constructing thematic maps and supporting the desired affairs.