• 제목/요약/키워드: space-time domain

검색결과 483건 처리시간 0.022초

Sampled-Data Modeling and Dynamic Behavior Analysis of Peak Current-Mode Controlled Flyback Converter with Ramp Compensation

  • Zhou, Shuhan;Zhou, Guohua;Zeng, Shaohuan;Xu, Shungang;Cao, Taiqiang
    • Journal of Power Electronics
    • /
    • 제19권1호
    • /
    • pp.190-200
    • /
    • 2019
  • The flyback converter, which can be regarded as a nonlinear time-varying system, has complex dynamics and nonlinear behaviors. These phenomena can affect the stability of the converter. To simplify the modeling process and retain the information of the output capacitor branch, a special sampled-data model of a peak current-mode (PCM) controlled flyback converter is established in this paper. Based on this, its dynamic behaviors are analyzed, which provides guidance for designing the circuit parameters of the converter. With the critical stability boundary equation derived by a Jacobian matrix, the stable operation range with a varied output capacitor, proportional coefficient of error the amplifier, input voltage, reference voltage and slope of the compensation ramp of a PCM controlled flyback converter are investigated in detail. Research results show that the duty ratio should be less than 0.5 for a PCM controlled flyback converter without ramp compensation to operate in a stable state. The stability regions in the parameter space between the output capacitor and the proportional coefficient of the error amplifier are enlarged by increasing the input voltage or by decreasing the reference voltage. Furthermore, the ramp compensation also can extend to the stable region. Finally, time-domain simulations and experimental results are presented to verify the theoretical analysis results.

Two-dimensional curved panel vibration and flutter analysis in the frequency and time domain under thermal and in-plane load

  • Moosazadeh, Hamid;Mohammadi, Mohammad M.
    • Advances in aircraft and spacecraft science
    • /
    • 제8권4호
    • /
    • pp.345-372
    • /
    • 2021
  • The analysis of nonlinear vibrations, buckling, post-buckling, flutter boundary determination and post-flutter behavior of a homogeneous curved plate assuming cylindrical bending is conducted in this article. Other assumptions include simply-supported boundary conditions, supersonic aerodynamic flow at the top of the plate, constant pressure conditions below the plate, non-viscous flow model (using first- and third-order piston theory), nonlinear structural model with large deformations, and application of mechanical and thermal loads on the curved plate. The analysis is performed with constant environmental indicators (flow density, heat, Reynolds number and Mach number). The material properties (i.e., coefficient of thermal expansion and modulus of elasticity) are temperature-dependent. The equations are derived using the principle of virtual displacement. Furthermore, based on the definitions of virtual work, the potential and kinetic energy of the final relations in the integral form, and the governing nonlinear differential equations are obtained after fractional integration. This problem is solved using two approaches. The frequency analysis and flutter are studied in the first approach by transferring the handle of ordinary differential equations to the state space, calculating the system Jacobin matrix and analyzing the eigenvalue to determine the instability conditions. The second approach discusses the nonlinear frequency analysis and nonlinear flutter using the semi-analytical solution of governing differential equations based on the weighted residual method. The partial differential equations are converted to ordinary differential equations, after which they are solved based on the Runge-Kutta fourth- and fifth-order methods. The comparison between the results of frequency and flutter analysis of curved plate is linearly and nonlinearly performed for the first time. The results show that the plate curvature has a profound impact on the instability boundary of the plate under supersonic aerodynamic loading. The flutter boundary decreases with growing thermal load and increases with growing curvature.

키워드 자동 생성에 대한 새로운 접근법: 역 벡터공간모델을 이용한 키워드 할당 방법 (A New Approach to Automatic Keyword Generation Using Inverse Vector Space Model)

  • 조원진;노상규;윤지영;박진수
    • Asia pacific journal of information systems
    • /
    • 제21권1호
    • /
    • pp.103-122
    • /
    • 2011
  • Recently, numerous documents have been made available electronically. Internet search engines and digital libraries commonly return query results containing hundreds or even thousands of documents. In this situation, it is virtually impossible for users to examine complete documents to determine whether they might be useful for them. For this reason, some on-line documents are accompanied by a list of keywords specified by the authors in an effort to guide the users by facilitating the filtering process. In this way, a set of keywords is often considered a condensed version of the whole document and therefore plays an important role for document retrieval, Web page retrieval, document clustering, summarization, text mining, and so on. Since many academic journals ask the authors to provide a list of five or six keywords on the first page of an article, keywords are most familiar in the context of journal articles. However, many other types of documents could not benefit from the use of keywords, including Web pages, email messages, news reports, magazine articles, and business papers. Although the potential benefit is large, the implementation itself is the obstacle; manually assigning keywords to all documents is a daunting task, or even impractical in that it is extremely tedious and time-consuming requiring a certain level of domain knowledge. Therefore, it is highly desirable to automate the keyword generation process. There are mainly two approaches to achieving this aim: keyword assignment approach and keyword extraction approach. Both approaches use machine learning methods and require, for training purposes, a set of documents with keywords already attached. In the former approach, there is a given set of vocabulary, and the aim is to match them to the texts. In other words, the keywords assignment approach seeks to select the words from a controlled vocabulary that best describes a document. Although this approach is domain dependent and is not easy to transfer and expand, it can generate implicit keywords that do not appear in a document. On the other hand, in the latter approach, the aim is to extract keywords with respect to their relevance in the text without prior vocabulary. In this approach, automatic keyword generation is treated as a classification task, and keywords are commonly extracted based on supervised learning techniques. Thus, keyword extraction algorithms classify candidate keywords in a document into positive or negative examples. Several systems such as Extractor and Kea were developed using keyword extraction approach. Most indicative words in a document are selected as keywords for that document and as a result, keywords extraction is limited to terms that appear in the document. Therefore, keywords extraction cannot generate implicit keywords that are not included in a document. According to the experiment results of Turney, about 64% to 90% of keywords assigned by the authors can be found in the full text of an article. Inversely, it also means that 10% to 36% of the keywords assigned by the authors do not appear in the article, which cannot be generated through keyword extraction algorithms. Our preliminary experiment result also shows that 37% of keywords assigned by the authors are not included in the full text. This is the reason why we have decided to adopt the keyword assignment approach. In this paper, we propose a new approach for automatic keyword assignment namely IVSM(Inverse Vector Space Model). The model is based on a vector space model. which is a conventional information retrieval model that represents documents and queries by vectors in a multidimensional space. IVSM generates an appropriate keyword set for a specific document by measuring the distance between the document and the keyword sets. The keyword assignment process of IVSM is as follows: (1) calculating the vector length of each keyword set based on each keyword weight; (2) preprocessing and parsing a target document that does not have keywords; (3) calculating the vector length of the target document based on the term frequency; (4) measuring the cosine similarity between each keyword set and the target document; and (5) generating keywords that have high similarity scores. Two keyword generation systems were implemented applying IVSM: IVSM system for Web-based community service and stand-alone IVSM system. Firstly, the IVSM system is implemented in a community service for sharing knowledge and opinions on current trends such as fashion, movies, social problems, and health information. The stand-alone IVSM system is dedicated to generating keywords for academic papers, and, indeed, it has been tested through a number of academic papers including those published by the Korean Association of Shipping and Logistics, the Korea Research Academy of Distribution Information, the Korea Logistics Society, the Korea Logistics Research Association, and the Korea Port Economic Association. We measured the performance of IVSM by the number of matches between the IVSM-generated keywords and the author-assigned keywords. According to our experiment, the precisions of IVSM applied to Web-based community service and academic journals were 0.75 and 0.71, respectively. The performance of both systems is much better than that of baseline systems that generate keywords based on simple probability. Also, IVSM shows comparable performance to Extractor that is a representative system of keyword extraction approach developed by Turney. As electronic documents increase, we expect that IVSM proposed in this paper can be applied to many electronic documents in Web-based community and digital library.

터널 안전진단을 위한 충격반향법 사례 연구 (Case Study on the Impact-Echo Method for Tunnel Safety Diagnosis)

  • 신성렬;조철현
    • 터널과지하공간
    • /
    • 제19권1호
    • /
    • pp.19-30
    • /
    • 2009
  • 비파괴 물리탐사 방법의 일종인 충격반향법 조사는 터널 구조물의 시공 중 품질관리 및 시공 후 구조물의 건전성을 파악하기 위한 안전진단 분야에 널리 사용되고 있다. 충격반향법은 특히 철근콘크리트로 시공된 라이닝에 대하여 라이닝의 두께나 터널 배면 공동 등 내부 상태를 파악하는데 가장 효과적인 비 파괴탐사 방법이다. 본 연구는 현장적용 사례 연구의 일환으로 철근 콘크리트 라이닝의 도로터널, NATM공법으로 시공된 지하철 터널, 재래식 공법으로 시공된 도로터널 등 구조 및 형식이 다른 여러 가지 터널에 대하여 충격반향법 조사를 실시하였다. 충격반향법 탐사 결과를 기존 설계도서, 코어링 자료 및 다른 탐사자료와 대비하였을 때 서로 잘 일치하였고 충격반향법 탐사결과의 신뢰도를 확인할 수 있었으며, 시간-주파수 분석은 구조물 내부 특성에 대한 추정을 보다 용이하게 하였다. 1차원적인 한 지점에서의 수직하부 정보를 구하는 통상적인 주파수 영역에서의 충격반향법 자료해석과 더불어 2차원적인 심도단면도를 구하는 탐사법 적용은 구조물을 보다 정확하게 영상화할 수 있기 때문에 구조물 내부에 대한 신뢰도 높은 정보 파악이 가능하였다.

해안 디지털 비디오를 이용한 쇄파지역에서의 파랑궤적 측정 (Remote Sensing of Wave Trajectory in Surf Zone using Oblique Digital Videos)

  • 유제선;신동민;조용식
    • 한국해안·해양공학회논문집
    • /
    • 제20권4호
    • /
    • pp.333-341
    • /
    • 2008
  • 본 연구에서는 해안 디지털 비디오를 이용하여 쇄파지역에서의 파랑궤적을 원격으로 측정하는 기술을 제안한다. 쇄파에 의해 발생하는 거품은 비디오 이미지로부터 파랑속성을 측정하는데 큰 오차를 야기한다. 이러한 이유로, 본 연구는 이미지 상에서 파랑신호와는 다른 거품 노이즈를 제거하기 위한 고급 영상처리기술과 쇄파지역에서 파랑속성을 효과적으로 측정하는데 필요한 파랑궤적을 검출하는 방법에 초점을 두고 있다. 이를 위하여 본 연구는 100 m 이상 거리범위의 쇄파지역에서 3 Hz 주파수로 촬영한 해안 비디오 자료를 이용한다. 비디오 원 영상으로부터 고주파수의 특성을 가지는 거품신호를 제거하기 위하여 이미지 프레임 후방차분과 방향성 로패스 이미지 필터를 통하여 비디오 이미지를 영상처리한다. 개별의 쇄파 파랑궤적은 레이돈 변환 선인식 알고리듬을 이용하여, 거품 노이즈가 제거된 해안선 수직방향 이미지 Timestack상에 적용하여 검출된다. 이 이미지 Timestack의 물리적 공간차원은 2차원 공간-시간 도메인으로 표현된다. 비디오 자료로부터 측정된 유효 파랑궤적의 개수는 실측자료로부터 얻어진 파랑개수의 약 2/3이다.

2007년 개정 슬기로운 생활 교육 과정의 내용 요소 및 탐구 활동 분석 (An Analysis of the Content Elements and Inquiry Activities in the Revised "Wise Life" Curriculum 2007)

  • 박재근;백현정
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제28권1호
    • /
    • pp.55-66
    • /
    • 2009
  • The purpose of this study is to assist understanding the integrated subjects and to obtain implications required on the actual operation of curriculum by analyzing content elements and basic inquiry activities in the revised "wise lift" curriculum 2007. The result of this study is as follows. First, the formation of elements in contents of "wise life" deals with the passage of time based on changing seasons, myself and family in the 1st grade and the concept of space based on home and a village in the 2nd grade. Six main subjects and twelve activity subjects are presented per each grade. Second, number of activity subjects and content elements are reduced as compared with 7th curriculum so that the responsibility of operating classes based on activities is reduced and the purpose of rationalizing contents is somewhat fulfilled. Third, eliminating a relevant domains decisively when presenting the activity subjects assures the identification and purpose as the integrated subject focused on inquiry activities. Fourth, the result of analyzing the course-relevance on content elements shows that the allotment per each domain and course is less considered but the relevance of social studies is higher regardless of non-course characteristics as the integrated subject. Fifth, according to the component ratio of basic inquiry activities, 'Observing' and 'Debating' were presented as the most essential activities, and 'Measuring' and 'Making' were relatively low. By considering characteristics of course requiring balanced and various experiences of inquiry activities, additional discussions are required on appropriateness of the component ratio. Sixth, 'Observing' was increased and 'Debating' and 'Making' were decreased on the main activities in this revised curriculum as compared with 7th curriculum.

  • PDF

지지구조의 유연성을 고려한 고속 유연 폴리곤 미러 스캐너 모터의 유한 요소 불평형 응답 해석 (Finite Element Analysis of Unbalance Response of a High Speed Flexible Polygon Mirror Scanner Motor Considering the Flexibility of Supporting Structure)

  • 정경문;서찬희;김명규;장건희
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.859-865
    • /
    • 2007
  • This paper presents a method to analyze the unbalance response of a high speed polygon mirror scanner motor supported by sintered bearing and flexible supporting structures by using the finite element method and the mode superposition method. The appropriate finite element equations for polygon mirror are described by rotating annular sector element using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. The rotating components except for the polygon mirror are modeled by Timoshenko beam element including the gyroscopic effect. The flexible supporting structures are modeled by using a 4-node tetrahedron element and 4-node shell element with rotational degrees of freedom. Finite element equations of each component of the polygon mirror scanner motor and the flexible supporting structures are consistently derived by satisfying the geometric compatibility in the internal boundary between each component. The rigid link constraints are also imposed at the interface area between sleeve and sintered bearing to describe the physical motion at this interface. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem by using the restarted Arnoldi iteration method. Unbalance responses in time and frequency domain are performed by superposing the eigenvalues and eigenvectors from the free vibration analysis. The validity of the proposed method is verified by comparing the simulated unbalance response with the experimental results. This research also shows that the flexibility of supporting structures plays an important role in determining the unbalance response of the polygon mirror scanner motor.

  • PDF

조습관점에서 본 건선 연구 (A Study on Psoriasis from a Viewpoint of the Dryness and the Dampness Theory in Oriental Medicine)

  • 김병수;국순호;강정수
    • 동의생리병리학회지
    • /
    • 제16권4호
    • /
    • pp.642-648
    • /
    • 2002
  • The Dryness and the Dampness is the congential nature. the Water and Fire is the acquired action. the skin is related to the physiological function of the lung, so the skin is the domain of the lung. the lung belongs to the dryness-metal(燥金). And the Dryness and the Dampness in the six pathogenic factors exert a important pathogenic influence upon the skin. Psoriasis is a chronic skin condition charactered by red, silver scaly patches in the affected areas, it is caused by excessive growth of the top layer of the skin(epidermis). Scalp psoriasis affects at least two thirds people who have psoriasis. Generally, the scalp will have plaque psoriasis characterized by elevated, inflamed, lesions covered with silvery white scales. The lesion of psoriasis is head, elbow and knee that are yang-channels in Oriental medicine. The syndrome falls with in the purview of the dryness-metal(燥金). In time, psoriasis takes a turn for the worse in the winter season. In space, many of people in comparison to the average in the world have psoriasis in high latitude that is dry and cold, for instance, the Scandinavian peninsula. Deficiency of yin-fluid and blood course often the dryness-syndrome, for instance, psoriasis, etc. So psoriasis is one of the dryness-syndrome in Oriental medicine.

압전 하이브리드 마운트의 진동제어 성능에 대한 실험적 고찰 (Experimental Investigation on Vibration Control Performances of the Piezoelectric Hybrid Mount)

  • 한영민
    • 한국융합학회논문지
    • /
    • 제11권11호
    • /
    • pp.203-209
    • /
    • 2020
  • 본 연구에서는 자동차 엔진에 적용되는 고무마운트의 성능을 극대화하여 시동초기 진동특성를 개선하기 위해 능동형 하이브리드 마운트를 제안하고 진동절연 성능을 실험적으로 고찰하고자 한다. 제안된 하이브리드 마운트는 수동형 고무요소와 능동형 압전작동기로 구성되었으며, 동적 특성과 제어력의 실험적 고찰을 통해 하이브리드 마운트가 제작되었다. 수직방향의 진동을 고려하여 관성질량을 갖는 압전-고무 하이브리드 마운트의 동적 지배방정식을 수학적으로 모델링하였으며 상태 공간 방정식으로 표현하였다. 본 연구에서는 진동을 절연하기 위해 강건한 슬라이딩 모드 제어기가 구성되어 진동제어 실험에 적용되었다. 마지막으로 넓은 주파수 영역에서 진동제어 성능을 실험적으로 고찰하였으며 주파수 영역에서의 전달율과 시간영역에서 진동절연 성능을 평가하였다.

NGN에서 QoS 제공을 위한 GMPLS의 라우팅 및 시그널링 화장 연구 (A Study of Routing and Signaling Extensions of GMPLS for QoS Provision in NGN)

  • 장석기;박광채
    • 한국정보통신학회논문지
    • /
    • 제7권5호
    • /
    • pp.925-933
    • /
    • 2003
  • 네트워크는 IP 계층과 광 계층이 수렴되는 광인터넷 네트워크로 진화할 것으로 예상되나, 현재의 기술수준으로 인해 과도적인 진화단계로서 GMPLS가 대두되었다. MPLS가 확장되고 일반화된 GMPLS는 패킷 교환 장치뿐만 아니라 시간, 파장 및 공간 영역에서 교환을 수행하는 장치까지 지원할 수 있도록 하고 있다. 이런 다양한 스위칭 타입에 공통적인 제어 평면을 구현하기 위해 GMPLS에서는 기존의 MPLS 신호 및 라우팅 프로토콜을 확장하게된다. 본 논문에서는 GMPLS 기술의 개요와 MPLS에서 링크의 상태 정보를 교환하기 위해 사용되었던 OSPF(Open shortest Path First) 프로토콜을 광 네트워크에서 다양한 링크 타입, 대역폭, 링크 보호 타입 등의 정보를 주고받기 위한 라우팅 확장 방안에 대하여 알아보고, 두 노드간의 수백, 수천개의 링크를 관리하는 복잡한 문제를 해결하기 위한 신호 프로토콜로 LMP라는 새로운 프로토콜의 정의를 기술한다. 그리고 MPLS에서 트래픽 엔지니어링을 위한 신호 프로토콜인 RSVP-TE를 GMPLS에 적용하기 위한 신호 프로토콜의 확장 방안과 수정된 RSVP 관련 메시지들을 검토분석 한다.