• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.219-222
• /
• 2002

There are screw, reciprocating type turbo compressor by structure in an air compressor which is essential equipment on the industrial spot. Recently, the application range of a turbo compressor tend to be wide gradually. And this type of compressor needs high speed rotation of impeller in structure so high ratio gearbox and conventional induction motor driving required. This mechanical system have results of increased moment of inertia and mechanical friction loss. Recent studies of modern turbo compressor have been applied to developing super high speed BLDC motor and driver which remove gearbox that make its size small and mechanical friction loss minimum. To accomodate this tendency, we tried to develope a super high speed motor drive system for 150Hp, 70,000rpm direct drive Turbo compressor using DSP(Digital Signal Processor) and SVPWM(Space Vector Modulation PWM) technique. The results of this specific application show that super high speed driver and controller could be implemented well with digital electronics.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1352-1354
• /
• 2005

In this paper, an improved dead time compensation method which is concerned about dead time and extra time in Pulse-Width-Modulation(PWM) period is presented comparing the existing dead time compensation. The voltage drop across the switches are modeled excluding effect of stray capacitor. A low pass filter(LPF) is adopted for accurate detecting of current polarity. The method is based on Space-Vector-Pulse-Width-Modulation(SVPWM). All simulation results are presented using MATLAB and Simulink.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.770-773
• /
• 2005

최근 산업 분야에 걸쳐서 고속, 고정밀도의 요구사항에 따라, 회전 모터와 볼 스크류, 벨트를 이용한 직선구동방식보다 빠르고 정확하며, 효율이 높은 직접구동 방식의 리니어모터 및 컨트롤러의 개발이 요구되고 있다. 이런 상황에 고속 연산을 수행할 수 있는 DSP(Digital Signal Processor)의 사용이 불가피하며, 기존의 칩들은 A/D변환기, PWM발생장치 등이 내장되지 않아 제어장치의 부품 수증가 및 복잡성을 피할 수 없었다. 따라서 본 논문에서는 SVPWM(Space Vector Pulse Width Modulation) 및 QEP(Quadrature Encoder Pulse) 회로와 PWM 발생기, 12bit의 고속 A/D변환기, 파워 드라이버보호회로 등을 내장한 TMS320F2812 DSP를 사용하여 반도체장비분야, 자동화분야 등에 사용되는 LBLDCM의 제어를 가능하게 만들었다. 또한, 기존의 DSP 시리즈 보다 연산속도가 고속화되어 고속연산에 의한 시간적 제한을 극복 할 수 있게 되었고, 제어에 필요한 하드웨어적인 기능들을 내장하고 있어서 주변회로가 필요 없게 되었다. 따라서 하드웨어의 간소화와 개발 시간의 단축 및 신뢰도의 향상과 모터 효율의 향상을 가져오도록 하였다. 제안된 제어장치는 제작되어, 실험을 통하여 그 타당성을 입증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.138-147
• /
• 2005

This paper presents a SPMSM(Surface-mounted Permanent Magnet Synchronous Motor) servo drive system using high performance TMS320F2812 DSP for the industrial application. The DSP(Digital Signal Processor) Controller enables an enhanced real time algorithm and cost-effective design intelligent for only exclusively motor drives which can be yield enhanced operation, fewer system components, lower control system cost, increased efficiency and high performance. The suggested system contain speed and current sensing circuits, SVPWM(Space Vector Pulse Width Modulation) and I/O interface circuit. The developed servo drive control system showns a good response characteristics results and high performance features in general purposed 400[w] machine. This system can achieve cost reduction and size minimization of controllers.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.67-75
• /
• 2017

Due to the excessive zero-sequence voltage in dual three-level inverter fed open-end winding induction motor systems, zero-sequence circumfluence which is harmful to switching devices and insulation is then formed when operating in a single DC voltage source supplying mode. Traditionally, it is the mean value instead of instantaneous value of the zero-sequence voltage that is eliminated, through adjusting the durations of the operating vectors. A new strategy is proposed for zero-sequence voltage elimination, which utilizes unified voltage modulation and a decoupled SVPWM strategy to achieve two same-sized equivalent vectors for an angle of $120^{\circ}$, generated by two inverters independently. Both simulation and experimental results have verified its efficiency in the instantaneous value elimination of zero-sequence voltage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.17-26
• /
• 2005

The random pulse width modulation(RPWM) in inverter-fed induction motor drive is presented. This paper describes a RPWM method based on space vector PWM strategy for shaping the switching noise spectrum in such a way it can merge with the natural system noise. To verify the validity of the proposed RPWM scheme, the experiment based on the DSP56F803 microprocessor was executed finally, the simulation and experimental results will be given to demonstrate the effectiveness of the unposed RPWM scheme.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.38-44
• /
• 2005

In a voltage source inverter, the dead time is necessary to prevent short circuits in the dc link. The dead time effect appears as a distortion of output voltages and currents. In recent years, the dead time compensation methods have been investigated in many literatures. This paper presents not the dead time compensation by sensing and calculation but the dead time elimination. The proposed inverter system doesn't need to sense load current and to calculate dead time. Adding some transformers to each leg, dead times in the inverter system are eliminated automatically. The proposed method is analyzed on each mode and verified through simulation results.