• Journal of Astronomy and Space Sciences
• /
• v.30 no.1
• /
• pp.49-58
• /
• 2013

ARGO-M is a satellite laser ranging (SLR) system developed by the Korea Astronomy and Space Science Institute with the consideration of mobility and daytime and nighttime satellite observation. The ARGO-M optical system consists of 40 cm receiving telescope, 10 cm transmitting telescope, and detecting optics. For the development of ARGO-M optical system, the structural analysis was performed with regard to the optics and optomechanics design and the optical components. To ensure the optical performance, the quality was tested at the level of parts using the laser interferometer and ultra-high-precision measuring instruments. The assembly and alignment of ARGO-M optical system were conducted at an auto-collimation facility. As the transmission and reception are separated in the ARGO-M optical system, the pointing alignment between the transmitting telescope and receiving telescope is critical for precise target pointing. Thus, the alignment using the ground target and the radiant point observation of transmitting laser beam was carried out, and the lines of sight for the two telescopes were aligned within the required pointing precision. This paper describes the design, structural analysis, manufacture and assembly of parts, and entire process related with the alignment for the ARGO-M optical system.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.75.2-75.2
• /
• 2016

We introduce Korean involvement in the Large Synoptic Survey Telescope Project and activities organized by a group of Korean astronomers as LSST Korea. The Korea Astronomy and Space Science Institute plans to sign a memorandum of agreement with Large Synoptic Survey Telescope Corporation this year. Although the project will start its commissioning observation around 2020, Korean preparation for the LSST era should be initiated now because of an unprecedented amount of data produced in the LSST. We explain current status of our efforts for the LSST Korea.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.1
• /
• pp.21-32
• /
• 2015

We have carried out photometric follow-up observations of bright transiting extrasolar planets using the CbNUOJ 0.6 m telescope. We have tested the possibility of obtaining high photometric precision by applying the telescope defocus technique, allowing the use of several hundred seconds in exposure time for a single measurement. We demonstrate that this technique is capable of obtaining a root-mean-square scatter of sub-millimagnitude order over several hours for a V~10 host star, typical for transiting planets detected from ground-based survey facilities. We compared our results with transit observations from a telescope operated in in-focus mode. High photometric precision was obtained due to the collection of a larger amount of photons, resulting in a higher signal compared to other random and systematic noise sources. Accurate telescope tracking is likely to further contribute to lowering systematic noise by exposing the same pixels on the CCD. Furthermore, a longer exposure time helps reduce the effect of scintillation noise which otherwise has a significant effect for small-aperture telescopes operated in in-focus mode. Finally we present the results of modelling four light-curves in which a root-mean-square scatter of 0.70 to 2.3 milli-magnitudes was achieved.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.58.1-58.1
• /
• 2016

During the year 2016 the newly installed NYSC (National Youth Science Center) 1m optical telescope was officially commissioned. Calls for future observational programmes were announced. During test observations we carried out an observational project aimed at follow-up observations of transiting extrasolar planets. To predict future transits we developed the "TransitSearch" code implemented in Python utilizing transit information from the Open Exoplanet Catalogue. During three nights in April and June 2016 we observed planetary transits of HAT-P-3b and TrES-3b. Preliminary light curves of the transit events are presented alongside with best-fit models. From this experience we plan to improve the optical alignment and photometric performance by operating the 1m NYSC telescope in a strongly out-of-focus mode for transit observations.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.58.1-58.1
• /
• 2017

National Youth Space Center has recently founded the Deokheung Optical Astronomy Observatory (DOAO) 1m Telescope, which accepts community observing applications since 2016. Standardization and calibration of the new observing facility are essential for astronomical research. In this poster, we present standardization processes and preliminary results for photometry of the Johnson-Cousins BVRI filter system. We selected sample data from a night in stable weather condition. After bias, dark, and flat corrections and photometry using ccdred and daophot package of IRAF, we derived standardized band pass parameters including color terms. The corrected photometry results of the BVRI filter system show reduced deviations from the standard magnitudes in the literature. In addition, we calculated atmospheric extinction coefficients and limiting magnitudes of the telescope system. We plan to extend these standardizing processes to flux calibration of narrow band filters, e.g. $H{\alpha}$ filter.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.3
• /
• pp.195-200
• /
• 2018

The present paper describes the design of a Solid State Telescope (SST) on board the Korea Astronomy and Space Science Institute satellite-1 (KASISat-1) consisting of four [TBD] nanosatellites. The SST will measure these radiation belt electrons from a low-Earth polar orbit satellite to study mechanisms related to the spatial resolution of electron precipitation, such as electron microbursts, and those related to the measurement of energy dispersion with a high temporal resolution in the sub-auroral regions. We performed a simulation to determine the sensor design of the SST using GEometry ANd Tracking 4 (GEANT4) simulations and the Bethe formula. The simulation was performed in the range of 100 ~ 400 keV considering that the electron, which is to be detected in the space environment. The SST is based on a silicon barrier detector and consists of two telescopes mounted on a satellite to observe the electrons moving along the geomagnetic field (pitch angle $0^{\circ}$) and the quasi-trapped electrons (pitch angle $90^{\circ}$) during observations. We determined the telescope design of the SST in view of previous measurements and the geometrical factor in the cylindrical geometry of Sullivan (1971). With a high spectral resolution of 16 channels over the 100 keV ~ 400 keV energy range, together with the pitch angle information, the designed SST will answer questions regarding the occurrence of microbursts and the interaction with energetic particles. The KASISat-1 is expected to be launched in the latter half of 2020.

• Publications of The Korean Astronomical Society
• /
• v.27 no.3
• /
• pp.95-103
• /
• 2012

We analyzed the current status of the telescope control system (TCS2) of the 1.8 m telescope in Bohyunsan Optical Astronomy Observatory (BOAO), and suggest a new TCS (TCS3) for the long term development of BOAO. The TCS2 was constructed in 1998 to replace the TCS1 which was installed with the telescope itself at the commencement of BOAO. One of the important parts of TCS is PMAC (Programmable Multi-Axis Controller), which is a general-purpose multi-axis motion controller. PMAC provides the direct interactive communication environment permitting users to command the controller directly with simple operations. This makes the setup, debugging, and diagnostics very easy. The TCS2 was operated stable for a long time, but the hardware and TCS computers have been deteriorated and are out of date now. The new TCS3 needs to be constructed based on a modern computer system. And functions such as pre-calculations of telescope limiting position, interworking with virtual observatory tools, and using GUI, etc should be added. Construction of the TCS3 will be a step creating a better observation environment for the Korean astronomical society.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.327-338
• /
• 2003

The aim of this paper is to describe the results of the study on the extreme-ultra-violet (EUV) solar telescope, which is designed to. a possible satellite mission. Since the EUV band can not be observed on the ground, the observation in EUV should be performed in space using a satellite or a rocket. Design of the Extreme-Ultra-Violet solar Telescope (BUVT) in this study is based on "Designing a small-sized engineering model of solar EUV telescope for a Korean satellite" (Han et al. 2001). Our EUVT design is satisfied with the requirements for a satellite in size and input voltage. The major goal of the study is to confirm if we can detect the specific wavelength (58.4nm to 62.9nm) with the EUVT. We describe re-designing of the EUVT to decrease a shelter ratio. Also we describe the technics in the optic system and the detector, which were used to manufacture the EUVT. We explain the detective program, which is to calculate the amount of the solar radiation, and the image data processing system.ng system.

• Bulletin of the Korean Space Science Society
• /
• 2007.10a
• /
• pp.99.1-99.1
• /
• 2007

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.85.2-85.2
• /
• 2013

We developed autoguiding system for IGRINS (Immersion Grating Infrared Spectrograph) which is a high resolution near-IR spectrograph. This instrument will be attached on the 2.7m telescope at the McDonald observatory in 2013 November. IGRINS consists of three near-Infrared detector modules, i. e., H and K band spectrograph modules and a K band slit camera module, within which we are using the slit camera for autoguiding of the telescope. Comparing to typical optical CCDs, however, the infrared array shows non-uniform responses, higher noises, and many bad pixels. In this poster, we present methods to improve center finding functions and algorithms for the infrared array and the simulator test results of the IGRINS Slit-Camera Package.