• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.569-574
• /
• 2011

In research vessels or naval ships, airborne noise from machineries such as diesel engine is the major source of underwater noise at low speed. In this paper, effect of engine noise on underwater noise is studied by considering two paths; sound radiation from hull plate and direct airborne noise transmission through hull plate. SEA (Statistical energy analysis) is used to predict hull plate vibration induced by engine noise, where SEA model consists of only two subsystems; engine room air space and hull plate. The pressure level in water is calculated from sound radiation by plate. Engine noise transmission through hull plate is obtained by assuming plane wave propagation in air-limp plate-water system. Two effects are combined and compared to the measurement, where speaker is used as a source in engine room and sound pressure levels in engine room and water are measured. The hydrophone is located 1 m away from the hull plate. It is found below 1000 Hz, prediction overestimates underwater sound pressure level by 5 to 12 dB.

• Journal of Korea Water Resources Association
• /
• v.35 no.2
• /
• pp.203-212
• /
• 2002

The purpose of this study was to examine the effect of vegetation on the flood plain in the Taewha river on the changes of flood level using a hydraulic physical model experiment. To simulate 9.0 km river, 1/300 horizontally and 1/72 vertically distorted model was used. The vegetation areas were divided by three sub -areas and the flood level changes were examined according to the locations of vegetation as well as the transverse Profile. As a result, the flood level changes were not significantly affected by the densely distributed vegetation. It was concluded that additional adjustable vegetation in urban river could make useful hydrophilic space.

• Journal of the Korean earth science society
• /
• v.30 no.4
• /
• pp.485-494
• /
• 2009

We report patterns of astronomical seeing at KSA SEMO (Korea Science Academy Space Earth and Man Observatory). Though the data of the seeing measured at the local observatory is essential in identifying the seeing of the observatory, systematic measurement of seeing has not been made in Pusan yet. For this reason, KSA SEMO adopted the Santa Barbara Instrument Group (SBIG) Seeing Monitor to constantly record the seeing. The seeing monitoring was done through an elaborate procedure involving direct CCD images in the focal plane which were subsequently analyzed for the full width at half maximum (FWHM) Gaussian widths. Based on the seeing monitoring for 8 months, we classified five patterns of the seeing at KSA SEMO: 'Sunset/Sunrise Effect', 'Extreme Fluctuation', 'Sudden Increment', 'Daily Variation' and 'Stable Condition'. Seeing was generally good from 1:00 am to 3:00 am than other times, and it was also better in Winter than in Summer.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.4
• /
• pp.315-323
• /
• 2010

This work investigates the influence of water compressibility on pressure pulsations induced by rotor-stator interaction (RSI) in hydraulic machinery, using the commercial CFD solver ANSYS-CFX. A pipe flow example with harmonic velocity excitation at the inlet plane is simulated using different grid densities and time step sizes. Results are compared with a validated code for hydraulic networks (SIMSEN). Subsequently, the solution procedure is applied to a simplified 2.5-dimensional pump-turbine configuration in prototype with different speeds of sound as well as in model scale with an adapted speed of sound. Pressure fluctuations are compared with numerical and experimental data based on prototype scale. The good agreement indicates that the scaling of acoustic effects with an adapted speed of sound works well. With respect to pressure fluctuation amplitudes along the centerline of runner channels, incompressible solutions exhibit a linear decrease while compressible solutions exhibit sinusoidal distributions with maximum values at half the channel length, coinciding with analytical solutions of one-dimensional acoustics. Furthermore, in compressible simulation the amplification of pressure fluctuations is observed from the inlet of stay vane channels to the spiral case wall. Finally, the procedure is applied to a three-dimensional pump configuration in model scale with adapted speed of sound. Normalized Pressure fluctuations are compared with results from prototype measurements. Compared to incompressible computations, compressible simulations provide similar pressure fluctuations in vaneless space, but pressure fluctuations in spiral case and penstock may be much higher.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.1
• /
• pp.9-14
• /
• 2014

The path loss data was re-calculated according to the distance between the base station and a mobile station in the mobile telecommunications network. In this paper, the averaged path loss data was plotted with the conventional path loss models(free space, plane earth, Hata model ${\ldots}$). The standard deviations for the 2 Km, 1 Km, 0.5 Km-interval averaged path loss were 2.29 dB, 3.39 dB, 4.75 dB, respectively. Additionally, the derivative values for the 2 Km, 1 Km, 0.5 Km-interval averaged path loss were evaluated to find the positions with more than 1 times or 2times of the standard deviation. The situations with the sharply fluctuated path loss were calculated to 5 positions in the 2 Km interval, to 7 positions in the 1 Km interval, to 19 positions in the 0.5 Km interval, respectively. And, the exact distances between the base station and a mobile station were found with the sharply fluctuated path loss.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.1
• /
• pp.161-194
• /
• 2017

The aim of this study is to look into sub-factors of spatial sense that can be contained in spatial sense of solid figure of mathematics curriculum and offer suggestions to improve teaching spatial sense of solid figures in the future. In order to attain these purposes, this study examined the meaning and sub-factors of spatial sense and the relations between spatial sense of solid figure and sub-factors of spatial sense through a theoretical consideration regarding various studies on spatial sense. Based on such examination, this study compared and analyzed textbooks used in South Korea, Finland and the Netherlands with respect to contents of mathematics curriculum and textbooks in grades, sub-factors of spatial sense, and realistic contexts for spatial sense of solid figure. In the light of such theoretical consideration and analytical results, this study provided suggestions for improving teaching spatial sense of solid figures in elementary schools in Korea as follows: extending contents regarding spatial sense of solid figures in mathematics curriculum and considering continuity between grades in textbooks, emphasizing spatial orientation as well as spatial visualization, underlining not only construction with blocks but also mental activities in mental rotation and mental transformation, comparing strength and weakness of diverse plane representations of three dimensional objects, and utilizing various realistic situations and objects in space.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.537-549
• /
• 2017

Wooden houses are classified into Traditional, Modern, Platform, Timber framing types. The most popular type is Platform framing which is come from foreign culture. The foreign and Korean tree structure tend to be incompatible with Korean culture and don't fit well with modern lifestyle. In this study, it will analyze the design characteristics of the traditional and modern wooden house to solve these problems. The design characteristics will be contributed to the development of wooden architecture which is suitable for Korean architectural style and lifestyle The research consists of space analysis, plane analysis, structural system analysis, roof type analysis, and aesthetic analysis. From the analytical results the design characteristics of traditional Hanok and modern wood structure, we propose the modular elements and the inner and outer shapes of the Korean - style wooden house.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.6
• /
• pp.535-542
• /
• 2006

A large signal stability analysis of the solar array regulator system is performed to facilitate the design and analysis of a Low-Earth-Orbit satellite power system. The effective load characteristics of every controllable method in the solar array system are classified to analyze the large signal stability. Then, using the state plane analysis technique, the stability of various equilibrium points is analyzed. A nonlinear transformation algorithm, which changes the effective load characteristic of the solar array regulator as constant resistive load, is also proposed for the large signal stability. The proposed resistive current mode control system can control the solar array output for purposes such as peak power tracking control and battery charging control. For the verification of the proposed large signal analysis and resistive current mode control, a solar array regulator system consisting of two 100W parallel module buck converters has been built and tested using a real 200W solar array.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.180-189
• /
• 2010

Since collective houses are started to be supplied, the housing market has been transformed from supplier to demander oriented, and various type with same area of unit households have been deigned and started to be distributed. It can be expected that such transfer phenomenon would be continuously sped-up, and unit household will be more subdivided and varied. Thus, we analysed and studied the planes with subject of unit households in national housing scale ($85m^2$) that is treated as supply standard and has biggest volume in construction by Korean housing corporation. The analysing method is investigating the area of each room within unit household, calculating their minimum, maximum, and average values, studying the efficiency of unit household plane according to the structure of each room by comparative analysis these values, and analysing changing matter by investigating any change of each room area. The analysing results of which are followings. At first, number of BAY on face is increasing. Second, allocation of each room has been vary. Third, area ratio among bedroom1, livingroom, diningroom/kitchen become similar. Fourth, the area of diningroom/kitchen become somewhat bigger. Fifth, the space for passage way is efficiently allocated. Sixth, service area is reduced, Seventh, stereotyped phenomenon Is appeared. Based on many studies so far, any improvements of unit householder in national housing scale are followings. First, in terms of forming style, unit householder in national housing scale is unfolded in various way though, the form of each room is not more than typical style. Second, it shows stereotyped phenomenon. Especially, bathroom 1, 2 show stereotyped feature in terms of their type and area across entire research years, also LDK allocation method is stereotyped, as well as stereotyped trend in bedroom 2, 3, allocation for 4 BAY type.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.190-196
• /
• 2013

Curved integral imaging is a simple method to display 3D images in space using lens array and provides wide viewing angle. In this paper, we propose a nonlinear 3D correlator based on the direct pixel-mapping (DPM) method in order to improve the recognition performance of 3D target object in curving-effective integral imaging. With this scheme, the elemental image array (EIA) originally picked up from a partially occluded 3-D target object can be converted into a resolution enhanced new EIA by using DPM method. Then, through nonlinear cross-correlations between the reconstructed reference and the target plane images, the improved pattern recognition can be performed from the correlation outputs. To show the feasibility of the proposed method, some preliminary experiments are carried out and results are presented by comparing the conventional method.