• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.400-425
• /
• 2018

This study presents the research results and current status of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to simulate the coupled hydro-mechanical behavior of fault, including slip or reactivation, induced by water injection. The first research step of Task B is a benchmark simulation which is designed for the modelling teams to familiarize themselves with the problem and to set up their own codes to reproduce the hydro-mechanical coupling between the fault hydraulic transmissivity and the mechanically-induced displacement. We reproduced the coupled hydro-mechanical process of fault slip using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. A methodology to formulate the hydro-mechanical coupling relations of two different hydraulic aperture models and link the solid element of TOUGH2 and the interface element of FLAC3D was suggested. In addition, we developed a coupling module to update the changes in geometric features (mesh) and hydrological properties of fault caused by water injection at every calculation step for TOUGH-FLAC simulator. Then, the transient responses of the fault, including elastic deformation, reactivation, progressive evolutions of pathway, pressure distribution and water injection rate, to stepwise pressurization were examined during the simulations. The results of the simulations suggest that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing collaboration and interaction with other research teams of DECOLVAEX-2019 Task B and validated using the field data from fault activation experiments in a further study.

• Journal of the Korean Geographical Society
• /
• v.50 no.3
• /
• pp.255-276
• /
• 2015

This paper presents a multi-agent system model of land-use and cover changes, which is developed and applied to the Gariwang-san and its vicinity, located in Pyeongchang and Jeongseon-gun, Gangwon province, Korea. The Land Use Dynamics Simulator (LUDAS) framework of this study is well suited for representing the spatial heterogeneity and dynamic interactions between human and natural environment, and capturing the impacts of forest-opening policy interventions to future socio-economic and natural environment changes. The model consists of four components: (1) a system of human population, (2) a system of landscape environment, (3) decision-making procedures integrating human(or household), environmental and policy information into forest land-use decisions, and (4) a set of policy scenarios that are related to the forest-opening. The results of model simulation by different combination of various forest management scenarios are assessed by the levels of household income, ecosystem service value and income inequality in the study region. As a result, the optimal scenario of forest-opening policies in the study region is to open the forest to local residential community for the purpose of recreation, considering the distinctive topographical feature. The model developed in this research is expected to contribute to a decision support system for sustainable forest management and various land-use policies in Korea.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.21-34
• /
• 2015

In this study, a reference model is constructed that provides architects or designers with sufficient information on the intelligent service facility that is essential for U-City space configuration, and for the support of enhanced design, as well as for planning activities. At the core of the reference model is comprehensive information about the intelligent service facility that plans the content of services, and the latest related information that is regularly updated. A plan is presented to take advantage of the database of list information systems in the Public Procurement Service that handles intelligent service facilities. We suggest a number of improvements by analyzing the current status of, and issues with, the goods information in the Public Procurement Service, and by conducting a simulation for the proper placement of CCTV. As the design of U-City plan has evolved from IT technology-based to smart space-based, reviews of limitations such as the lack of standards, information about the installation, and the placement of the intelligent service facility that provides U-service have been carried out. Due to the absence of relevant legislation and guidelines, however, planning activities, such as the appropriate placement of the intelligent service facility are difficult when considering efficient service provision. In addition, with the lack of information about IT technology and intelligent service facilities that can be provided to U-City planners and designers, there are a number of difficulties when establishing an optimal plan with respect to service level and budget. To solve these problems, this study presents a plan in conjunction with the goods information from the Public Procurement Service. The Public Procurement Service has already built an industry-related database of around 260,000 cases, which has been continually updated. It can be a very useful source of information about the intelligent service facility, the ever-changing U-City industry's core, and the relevant technologies. However, since providing this information is insufficient in the application process and, due to the constraints in the information disclosure process, there have been some issues in its application. Therefore, this study, by presenting an improvement plan for the linkage and application of the goods information in the Public Procurement Service, has significance for the provision of the basic framework for future U-City enhancement plans, and multi-departments' common utilization of the goods information in the Public Procurement Service.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.249-261
• /
• 2020

Coastal monitoring using multiple platforms/sensors is a very important tools for accurately understanding the changes in offshore marine environment and disaster with high temporal and spatial resolutions. However, integrated observation studies using multiple platforms and sensors are insufficient, and none of them have been evaluated for efficiency and limitation of convergence. In this study, we aimed to suggest an integrated observation method with multi-remote sensing platform and sensors, and to diagnose the utility and limitation. Integrated in situ surveys were conducted using Rhodamine WT fluorescent dye to simulate various marine disasters. In September 2019, the distribution and movement of RWT dye patches were detected using satellite (Kompsat-2/3/3A, Landsat-8 OLI, Sentinel-3 OLCI and GOCI), unmanned aircraft (Mavic 2 pro and Inspire 2), and manned aircraft platforms after injecting fluorescent dye into the waters of the South Sea-Yeosu Sea. The initial patch size of the RWT dye was 2,600 ㎡ and spread to 62,000 ㎡ about 138 minutes later. The RWT patches gradually moved southwestward from the point where they were first released,similar to the pattern of tidal current flowing southwest as the tides gradually decreased. Unmanned Aerial Vehicles (UAVs) image showed highest resolution in terms of spatial and time resolution, but the coverage area was the narrowest. In the case of satellite images, the coverage area was wide, but there were some limitations compared to other platforms in terms of operability due to the long cycle of revisiting. For Sentinel-3 OLCI and GOCI, the spectral resolution and signal-to-noise ratio (SNR) were the highest, but small fluorescent dye detection was limited in terms of spatial resolution. In the case of hyperspectral sensor mounted on manned aircraft, the spectral resolution was the highest, but this was also somewhat limited in terms of operability. From this simulation approach, multi-platform integrated observation was able to confirm that time,space and spectral resolution could be significantly improved. In the future, if this study results are linked to coastal numerical models, it will be possible to predict the transport and diffusion of contaminants, and it is expected that it can contribute to improving model accuracy by using them as input and verification data of the numerical models.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.53-62
• /
• 2023

This paper has suggested the necessity of introducing training contents using XR(Extended reality) technology as a way to lower the high rate of nursing accidents among unskilled technical personnel in domestic shipbuilding industry, focusing on cable pulling using winch. The occurrence rate of nursing accidents in the domestic shipbuilding industry was almost double(197.4%) (2017~2020) when compared with other manufacturing industries. In particular, it is worth noting that more than 31.8% of nursing accidents in the shipbuilding industry occurred among workers whose job experience is no more than 6 months. Most of new workers are seen to have hard time due to several factors such as lack of work information, inexperience, and unfamiliarity with the working environments. This indicates that it is essential to incorporate more effective training method that could help new workers become familiar with technical skills as well as working environments in a short period of time. Currently, education/training at the domestic shipyard is biased toward technical skills such as welding, painting, machine installation, and electrical installation. Contrary, even more important training required to get new workers used to the working environment has remained at a superficial level such as explaining ship building processes using 2D drawings. This may be the reason why it is inevitable to repeat similar training at OJT (On-the-Job Training) even at the leading domestic companies. Domestic shipbuilding industries have been attracting a lot of new workers thanks to recent economic recovery, which is very likely to increase the occurrence of disasters. In this paper, the introduction of training using XR technology was proposed, and as a specific example, the process of pulling cables using winches on ships was implemented as XR-based training content by using Unity. Using the developed content, it demonstrated that new workers can experience the actual work process in advance through simulation in a virtual space, thereby becoming more effective training content that can help new workers become familiar with the work environment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.41-51
• /
• 2015

The purpose of the Follies that were constructed for the Gwangju-Biennale were for urban regeneration, to activate the empty old-town areas, and to strengthen the tradition and sense of place of the city. However, the ten Follies constructed around the wall of the old castle reveal many problems including that of leaving Follies alone instead of actively using them, damage to shop-keepers nearby, and pedestrian inconvenience, which is different from the original purposes. This study is meant to help understand the source of the negative phenomena, and to offer plans that will be conductive to the role of urban regeneration through activating the Follies and the spaces around them. As results of the investigation, there was no context giving uniformity among the various Follies. Also, the study showed that the insufficience of designers' understanding of the circumference near the Follies and lack of a consensus between the citizens and designers in the process of making the Follies. The crucial solution for solving these problems, and bringing to life the original purpose of creating the Follies was derived as applying "human activity" to the Follies. This study suggested 'street performance' as an effective device for application to human activity. While a Folly has no fixed function, the development of space program categories based on the applied characteristics of each Folly, and the simulation thereof showed effective potential for attracting people and activating those stagnated spaces. Recently, Gwangju city depicted the second Follies in applications such as reading roon, toilet, and movable food cart, which have clear purpose and different characteristics from the first ones. However, the first Follies will not be moved or demolished. As they are located around the National Asia Culture Center, some of them are supposed to be used to view the center. Consequently, a counterplan for the continuous and efficient use of those Follies is needed. Gwangju has a plan for the installation of 100 Follies throughout the city and it is expected that this study will be a meaningful guide line for improved Follies in the future.