• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.115-126
• /
• 1990

In the past, seawall and sea dike very higher than sea-water elevation had been constructed mainly to prevent the wave overtopping volume. However, the coastal zone is recently developed for the multipurpose of not only preventing from the coastal disaster but conserving the coastal environment and utilizing the coastal space. In this sense, this paper deals with the artificial reef being able to reduce the overtopping volume. Relations of the overtopping volume to the breaking wave are briefly reviewed theoretically, and fundamental factor affecting it are also obtained experimentally form the artificial reef with the irregular waves, In addition, the numerical simulation is developed to investigate the effects of spectral band width for the overtopping volume. The most effective artificial reef section to reduce the overtopping volume is proposed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.2
• /
• pp.137-147
• /
• 2012

GRS is an effective urban ecology restoration technique that can manage a variety of environmental functions such as ecological restoration, rainwater spill control and island heat effect from a low-impact development standpoint that can be utilized in new construction and retrofits. Recently, quantitative evaluation studies, both domestic and abroad, in the areas related to these functions, including near-earth surface climate phenomenon, heavy rainwater regulation, thermal environment of buildings, have been actively underway, and there is a trend to standardize in the form of technological standards. In particular, centered on the advanced European countries, studies of standardizing the specific insulation capability of buildings with green system that comprehensively includes the green roof, from the perspective of replacing the exterior materials of existing buildings, are in progress. The limitation of related studies in the difficulties associated with deriving results that reflect material characteristics of continuously evolving systems due in part to not having sufficiently considered the main components of green system, mechanisms of vegetation, soils. This study attempts to derive, through EnergyPlus, the effects that the vegetation-related indicators such as vegetation height, FCV, etc. have on building energy load, by interpreting vegetation and soil mechanisms through plant canopy model and using an ecological standard indicator LAI that represent the condition of plant growth. Through this, the interpretations that assume green roof system as simple heat insulation will be complemented and a more practical building energy performance evaluation method that reflects numerical methods for heat fluxes phenomena that occur between ecology restoration systems comprised of plants and soil and the ambient space.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.415-424
• /
• 1995

Combined models, specified by two or more modeling formalisms, can represent a wide variety of complex systems. This paper describes a methodology for the development of combined models in two model types of discrete event and continuous process. The methodology is based on transformation of continuous state space into discrete one to homomorphically represent dynamics of continuous processes in discrete events. This paper proposes a formal structure which can combine model of the DES and the CS within a framework. The structure employs the DEVS formalism for the DES models and differential or polynomial equations for the CS models. To employ the proposed structure to specify a DEVS/CS combined model, a modeler needs to take the following steps. First, a modeler should identify events in the CS and transform the states of the CS into the DES. Second, a modular employs the formalism to specify the system as the DES. Finally, a moduler developes sub-models for the CS and continguos states of the DES and establishs one-to-one correspondence between the sub-models and such states. The proposed formal structre has been applied to develop a DEVS/CS combined model for the human cardiovascular system. For this, the cardiac cycle is partitioned into a set of phases based on events identified through observation. For each phase, a CS model has been developed and associated with the phase. To validate the DEVS/CS combined model developed, then simulate the model in the DEVSIM + + environment, which is a model simulation results with the results obtained from the CS model simulation using SPICE. The comparison shows that the DEVS/CS combined model adequately represents dynamics of the human heart system at each phase of cardiac cycle.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.61.1-61.1
• /
• 2014

GSH 006-15+7 is a Milky Way supershell discovered by Moss et al. (2012). This supershell shows large shell-like structures in H I velocity maps. We have analyzed FUV emission for the supershell regions based on the FIMS and GALEX observations. Bright FUV flux at the boundaries of the supershell is mostly originated from dust scattering of FUV photons by dust clouds which was also observed at the boundaries of the supershell. We could find the distance to the supershell can be closer more than 30% compared with the distance of 1500 pc suggested by Moss et al. (2012) from the dust scattering simulation. And we also found the albedo and the phase function asymmetry factor of interstellar grains were 0.30 and 0.40, respectively. The confidence range for the albedo covers the theoretical value of 0.40, but g-factor is rather smaller than the theoretical value of 0.65. The small g-factor might mean the environment of turbulent ISM of the supershell. Meanwhile, the excess of C IV and X-ray emissions in the inside of the supershell can support the existence of hot gas and cooling in the supershell. And the C IV and X-ray emissions are monotonically decrease as away from the center of the SNR. This indicates the size of the hot bubble has considerably shrunk. We applied a simple simulation model to the PDR candidate region of the lower part of the supershell and obtained a H2 column density N(H2) = 1017.0-18.0 cm-2 and total hydrogen density nH ${\geq}$ 10 cm-3. This result shows the PDR candidate region represents a transition region from the warm phase to the cool phase in the PDR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.871-879
• /
• 2009

The performance variations of a spatio temporal smart antenna which is equipped at the basestation of CDMA cellular communication network due to the parametric change of multipath fading environment are studied in this paper. The smart antenna of interest employs space diversity based adaptive array structure in conjunction with rake receiver that has fingers the number of which is the same as that of multipath links. The beamforming is achieved via LMS(Least Mean Square) algorithm in which a reference signal is generated using decision directed formula. It has been shown by computer simulation that the performance of our smart antenna of interest depends significantly upon not only the degree of desired signal's DOA(Direction of Arrival)spread but the number of fingers of the rake receiver. The relative insensitivity of the smart antenna's performance on desired signal's delay spread has also been observed. Computer simulation has shown that the increase of the number of fingers brings in a nonlinear enhancement of the performance of our smart antenna. The renewal of weight vector in the beamforming procedure is taken place at post PN despread stage.

• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2014

Delay-Tolerant Network (DTN) is an asynchronous networking technology that has been deployed for the networking environment in which steady communication paths are not available, and therefore it stores receiving data in a data storage and forward them only when the communication links are established. DTN can be applied to sensor networks and mobile ad-hoc network (MANET) as well as space communication that supports data transmissions among satellites. In DTN networking environments, it is very important to secure a scheme that has relatively low routing overhead and high reliability, so that it can enhance the overall routing speed and performance. In order for achieving efficient data transmissions among the nodes that have comparatively periodic moving patterns, this paper proposes a time information based DTN routing scheme which is able to predict routing paths. From the simulation results using Omnet++ simulation tools, it has been verified that the proposed time information based DTN routing algorithm shows satisfied levels of routing speed and routing reliability even with lower routing overheads.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.21-30
• /
• 2016

Recently manufacturing companies have used PLC control programs popularly for their automated production systems. Since the life cycle of production process is not so long, the change of the production lines occur frequently. Most of changes happen with modification of the position information and control process of the equipment. PLC control program is also modified based on the fundamental process. Therefore, to verify new PLC program by configuring virtual space according to real environment is needed. In this paper we show a logical modeling method, based on Timed-FSA useful for sequence control and dead-lock prevention. There is a problem wasting user's labor and time when defining a variety of states in a device. To overcome this problem, we propose an extended I-O model based on existing methods by adding a token concept of Petri Nets. Also we will show the usability of the extended I-O modeling through user study.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.367-373
• /
• 2023

Aircrews and passengers are exposed to radiation from cosmic rays and secondary scattered rays generated by reactions with air or aircraft. For aircrews, radiation safety management is based on the exposure dose calculated using a space-weather environment simulation. However, the exposure dose varies depending on solar activity, altitude, flight path, etc., so measuring by route is more suggestive than the calculation. In this study, we developed an instrument to measure the cosmic radiation dose using a general-purpose Si sensor and a multichannel analyzer. The dose calculation applied the algorithm of CRaTER (Cosmic Ray Telescope for the Effects of Radiation), a space radiation measuring device of NASA. Energy and dose calibration was performed with Cs-137 662 keV gamma rays at a standard calibration facility, and good dose rate dependence was confirmed in the experimental range. Using the instrument, the dose was directly measured on the international line between Dubai and Incheon in May 2023, and it was similar to the result calculated by KREAM (Korean Radiation Exposure Assessment Model for Aviation Route Dose) within 12%. It was confirmed that the dose increased as the altitude and latitude increased, consistent with the calculation results by KREAM. Some limitations require more verification experiments. However, we confirmed it has sufficient utilization potential as a cost-effective measuring instrument for monitoring exposure dose inside or on personal aircraft.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.1-11
• /
• 1999

Thermal behavior of spacecraft propulsion system utilizing monopropellant hydrazine ($N_2$$H_4$) is addressed in this paper. Thermal control performance to prevent propellant freezing in spacecraft-operational orbit was test-verified under simulated on-orbit environment. The on-orbit environment was thermally achieved in space-simulation chamber and by the absorbed-heat flux method that implements an artificial heating through to the spacecraft bus panels enclosing the propulsion system. Test results obtained in terms of temperature history of propulsion components are presented and reduced into duty cycles of the avionics heaters which are dedicated to thermal control of those components. The duty cycles are subsequently converted into the electrical power required in the operational orbit. Additionally, cyclic temperature of each component, which was made under thermal-balanced condition of spacecraft, is compared to the acceptable design range and justified from the viewpoint of system verification.