• Journal of the Korean Professional Engineers Association
• /
• v.17 no.4
• /
• pp.28-39
• /
• 1984

Experiments were carried out for the development of a processing method of soybean into full-fat or defatted flour, using two varieties of soybean (kwangkyo produced in Korea and Bragg produced in India) Samples were subjected to dry dehulling, size reduction and wet heat treatment processes to make soybean flours. The quality of soybean flours were evaluated, and the results obtained were summarized as follows. 1. Crude fiber content of dehulled soybean was under 3.0% which indicated satisfactory dehulling, and there was no significant difference in crude fibre content between two varieties. 2. When dehulled soybean was cracked into soy grits by a hammer mill, 98.71∼98.86％ of the soy grit was in the range of 10∼18 mesh which was the optimum size of particle for quick and uniform penetration of heat into the intra-particle air spaces. 3. Moisture content of soy flour after steam treatment at 15 psig for 5 to 30 min was only 0.29∼1.68% which did not hinder the next milling operation. 4. From the color analysis of soy flours, it was observed that the dominant wavelength for all the samples are in a very narrow range from 575 to 581 nm and the color variation was from yellow to yellowish orange. Twenty to twenty five ％ higher reflectance was observed in the defatted flours than full fat flours. The ％ chroma of the defatted flour slightly increased as the duration of steaming of soy grits increased, whereas that of the full-fat flour did not. 5. The protein extractability in the defatted flour at pH 7.6 showed progressive decrease in solubility from 48.40％ (Bragg), 75.20％ (kwangkyo) for untreated flours to 9.75％ (Bragg), 26.27％ (kwangkyo) for 30 min steaming. But Kwangkyo variety showed twice higher protein extractability than Bragg variety.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.732-738
• /
• 1991

Corsoy 79 soybeans were ground into 8-(coarse) and 24-mesh (fine) full-fat soy flours. From the particle size analysis, the 8-mesh full-fat soy flours were found to have larger values for geometric mean diameter and geometric standard deviation. However, the distribution moduli of coarse and fine soy flours were similar and indicated soybeans were nearly 'brittle'. Development of hydrolytic and oxidative rancidities of coarsely and finely ground full-fat soy flours were followed from grinding to 24 hrs later. No increases in peroxide value and conjugated dienes in the oil and hexanal content in the headspace of the flour were observed when the moisture was 10.7% or less. At 14.9% moisture and above, lipid oxidation increased with increased moisture content and storage time. Free fatty acid contents increased slightly at all moisture contents. However, hydrolysis did not exceed 0.06% over the moisture range of 4 to 18%, which is of little practical significance. Fine grinding increased oxidative and hydrolytic rancidities, especially at 14.9% moisture and above. these findings indicate that raw soybeans can be ground to full-fat soy flours and stored up to 24 hrs without undergoing significant lipid and flavor deterioration if the moisture content is 11% or less.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.1043-1048
• /
• 2004

This study was carried out to investigate the effect of soy protein dispersibility on the bread making properties when Doenjang powders (DP) were added to the bread formula at the levels of 2.5 or 5.0%, comparing with full fat (FSF) or defatted (DSF) soy flours which contain same protein contents as those of DP. Protein dispersibility indices (PDI) for DP, FSF, DSF and strong wheat flour were 57.1, 7.3, 10.8 and 32.8%, respectively. Addition of DP decreased significantly the resistance to extensibility of wet gluten and increased its extensibility. However, FSF and DSF showed different changes in gluten rheology due to their PDI. In correlation coefficient values, PDI affected positively both gluten extensibility (r=0.98, p<0.01) and ovenspring (r=0.88, p<0.05) resulting in loaf volume and texture improvement of bread with addition of DP.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.6-15
• /
• 1973

In an attempt to develop composite flours based on raw materials available in Korea, six domestic resources were investigated with respect to their physical and chemical properties, nutritive value and economy. The results are summarized as follows: 1) Flours from naked barley, sweet potato, potato, corn, defatted rice bran and defatted soybean were compared in respect of their proximate composition, thiamine content and protein score. 2) In color comparison, naked barley and defatted soy flours were comparable to wheat flour whereas corn and sweet potato flours were a little inferior. In raising power, naked barley and defatted soy flours were similar to wheat flour and others were inferior. 3) In maximum viscosity of flours by amylograph, naked barley, corn and potato flours were higher than wheat flour and others were lower. In viscosity in cooling, corn flour was similar to wheat flour and naked barley and potato flours were lower. Addition of $10{\sim}20%$ defatted soy flour into other flours generally caused the lowering of viscosity. Addition of emulsifiers such as glyceryl monostearate, calcium stearyl lactylate, Methocel and Emulthin into the flours manifested different effects on the amylogram. 4) In nutritional test by rat, diets consisting of naked barley, sweet potato, potato or corn flours, each containing defatted soy flour (at 10% level with exception of 20% for sweet potato flour) and naked barley flour fortified with lysine were similar to wheat flour in digestibility, but were superior in NPU and biological value. 5) In price estimation, sweet potato and corn flours were competitive with wheat flour, but naked barley flour was a little expensive. On the other hand, barley and sweet potato are promising in terms of domestic production.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.16-24
• /
• 1973

Breads were made from composite flours based on domestic resources and their quality was assessed to obtain the following results. 1) When barley bread was made according to the formula for standard wheat bread, its specific loaf volume (SLV) was quite low (1.3 at 100% addition of water) in comparison with 3.3 for wheat bread. Addition of 10% defatted soy flour increased its SLV to 1.7 (at 100% water). Among various flour-improving additives, the use of 1.5% GMS + 0.5% CSL gave best results (SLV: 2.0 at 100% water). Admixture of wheat flour with the composite flour based on barley was most effective. Replacement of barley flour with 25% wheat flour gave SLV of 2.8 (at 90% water) and that with 50% wheat flour gave SLV of 3.2 (at 90% water), comparable to standard wheat bread with respect to loaf volume, color and texture. 2) Sweet potato bread had the characteristics of turning black-brown on baking. Use of 20% defatted soy flour and GMS + CSL gave higher SLV (1.9 at 100% water). Addition of wheat flour at 25% or 50% level to the composite flour based on sweet potato flour gave SLV of 2.3 and 2.6, respectively, at 90% water and its color and texture were improved 3) Potato flour was different from sweet potato flour in baking, the effect of GMS + CSL being quite low. Bread from corn flour was different from barley flour bread and defatted rice bran was not suitable for bread-making. 4) Bread was made from following composite flours based on naked barley and sweet potato flours along with the use of proper additives: (a) naked barley flour + defatted soy flour + wheat flour (45 : 10 : 45) (b) naked barley flour + defatted soy flour + wheat flour (67 : 10 : 23) (c) naked barley flour + defatted soy flour (90 : 10) (d) sweet potato flour + defatted soy flour + wheat flour (40 : 20 : 40) (e) sweet potato flour + defatted soy flour (60 : 20 : 20) Sensory evaluation of above breads in comparison with standard wheat bread (So) gave the following decreasing order of scores, So>(a)>(b)>(c)>(e)>(d) and Duncan's multiple range test showed that bread (a) was not different from standard wheat bread significantly at 5% level, in overall evaluation including color, texture, taste and flavor.

• Korean journal of food and cookery science
• /
• v.11 no.5
• /
• pp.479-486
• /
• 1995

The reological properties of doughs blended with cereal flours were investigated in the study. The doughs were prepared of wheat flours mixed with 10％, 20%, 30% and 40% ratio of rice flour, waxy-rice flour, brown-rice flour and soybean flour. Amylogram, farinogram, extensogram and SEM were used to measured thier special properties with graphs and photos. The results were obtained as followes; 1. Wheat dough formation after fermantation, showed "stringing" structure of small starch granules on the SEM photo. But the large starch granules contributed little to the structure formation in rice flours dough, and played relatively a little role in the structure formation of blended doughs of waxy-rice, brown-rice and soy- bean flours. 2. The absorption of flour composited rice and brown-rice, was lower than that of the control by Farinograph. It was decreased the farinograph absorption with the increase of replacement ratio of cereal flours. Dough development time of cereal blended flours decreased, but that time of waxy-rice and brown-rice were very similiar. Farinograph stability of rice, waxy-rice, brown-rice and soybean blended flours, had shorter than that of wheat-flour. 3. The results showed that cereal blended flours decreased the resistance to extention (elasticity) without affecting the extensibility in fermented dough by Extensograph. 4. The gelatinization temperature of wheat, rice, waxy-rice, and brown-rice were 55.0$^{\circ}C$, 64.0$^{\circ}C$, 58.0$^{\circ}C$ and 61.0$^{\circ}C$. But that of all cereal blended flours showed 58.0$^{\circ}C$ except 20% or 30% soybean blended flours. According to the amylogram, each maximum viscosity of rice flour and wheat flour was 1760 B.U.,760 B.U.. Soybean composite flours had significantly lowe. amylograph peak viscosity (300 B.U.) than that of the other composite flours (450 B.U.-1100 B.U.).

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1973

Noodles and cookies were made from composite flours based on domestic resources and their quality was assessed to obtain the following results. 1) Various flours containing $10{\sim}20%$ defatted soy flour did not form belt in noodle-making process, but the use of 1.5% GMS + 2% Methocel as binder was very effective in noodle-belt formation and cooking quality. 2) Out of four raw flours, naked barley flour was most suitable for noodle-making. Addition of wheat flour at 25% or 50% level into the four composite flours greatly improved the quality of noodles and particularly that based on naked barley was similar to wheat flour in color and gave rather palatable taste. 3) Though cookie could be made from any composite flours without using GMS or CSL, naked barley flour was the best in sensory evaluation of the product. 4) Addition of wheat flour at 25% or 50% level into above composite flours gave cookies comparable to standard wheat product except the case of composite flour based on defatted rice bran.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.52-57
• /
• 2008

The effects of transglutaminase (TG) on the pasting and rheological properties of different wheat cultivars ('Sharpshooter', 'Russ', and 'AcAriss') blended with barley (40%) or soy (20%) flour were investigated. In the rapid visco-analyzer (RVA) pasting profile, the addition of barley or soy flour to wheat flour samples induced a decrease in peak, trough, final viscosity, breakdown and setback values. However, TG treatment of these blends significantly increased peak viscosity and breakdown (p<0.05). In particular, TG treatment greatly increased the breakdown of wheat flour blended with soy flour, indicating that the cross-linking of proteins through TG may somehow be related to an increase in starch granule rupturing in pastes. Storage (G') and loss (G") moduli of the sample pastes increased with an increase in frequency ($\omega$), while complex viscosity (${\eta}*$) decreased. In all wheat cultivars, G', G", and $\eta$ were decreased by the addition of barley or soy flour, or TG treatment. Results suggest that protein cross-linking by TG can produce unique and improved properties in wheat flours blended with barley or soy flour.

• Korean Journal of Food Science and Technology
• /
• v.8 no.4
• /
• pp.236-241
• /
• 1976

A barley (20-30%)-wheat (80-70%) flour gave generally acceptable noodle-making characteristics, in which naked barley flour showed somewhat better results than covered barley flour. And also for over 40% barley flour in the barley-wheat flour, the addition of xanthan gum improved the noodle-making characteristics. A naked barley-defatted soy flour could make dried noodles with only high NSI (Nitrogen Solubility Index) defatted soy flour, however this mixture was not considered to be feasible for noodle-making. In cooking characteristics of barley-wheat flour noodles, naked barley flour was more acceptable than covered barley flour and xanthan gum influenced the water absorption and volume expansion of noodles during cooking. The firmness, cohesiveness and gumminess in cooked noodles made of the barley-wheat flour increased and then decreased as the amounts of barley increased. The mixing of defatted soy flour (high NSI) to naked barley flour increased the firmness and gumminess of cooked noodles.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.1119-1126
• /
• 2017

Quality characteristics of commercially available soybean and mung-bean flours in Korea were evaluated relative to product information such as bean content, price, chromaticity, proximate composition, water binding capacity, swelling power and solubility. Origin of raw materials was 23 in domestic products and 19 in imported products. The price of the product was 3.48 times more for raw soybean flour, 3.34 times more for fried soybean flour, and 3.47 times more for mung bean flour compared to imported soybean. In the domestic products, the lightness of raw soybean flour was higher than roasted soybean flour. The redness and yellowness of roasted soybean flour were higher than raw soybean flour. Moisture content of raw soybean flour was higher than roasted soybean flour, and crude fat, crude protein and carbohydrate content were higher in imported soybean flour. Ash and crude protein contents of mung bean were slightly higher than imported products. Water binding capacity of roasted soybean flour in domestic products was higher than raw soy flour, and there was no significant difference in solubility and swelling power. Correlation between quality characteristics of commercially available soybean and mung-bean flours products was found to be highly significant among measured items, except for solubility.