• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.47-53
• /
• 2014

We investigated the effect of straw mat cover and soil amendments on the reduction of runoff, non-point source pollution load and yield of a Chinese cabbage from alpine fields. Two plots on sandy loam soil were prepared. Experimental treatments were control and rice straw mat cover (3,300 kg/ha)+Polyacrylamide (PAM) (5 kg/ha)+Gypsum (1 ton/ha) (SPG). A variety of Chinese cabbage was cultivated and runoff was monitored during a growing season in 2012. Monitoring was conducted to seven times. Runoff rate of SPG plot was lower than those of control plot. The reduction rate of runoff from SPG plot was 29.4 % compared to control plot. The reduction rate of suspended solids (SS), total nitrogen (TN) and total phosphorus (TP) load of SPG plot was 86.5 %, 34.7 % and 39.1 %, respectively. Yield of a Chinese cabbage from SPG plot (39,646 kg/ha) was greater than that of control plots (28,482 kg/ha). It was concluded that the use of SPG on soil surface could not only reduce the NPS pollution loads in receiving waters but also help increase the crop yield.

• The Plant Pathology Journal
• /
• v.24 no.4
• /
• pp.407-416
• /
• 2008

Studies were conducted to determine the effects of temperature, solute potential and carbon source on the mycelial growth, sclerotia development, and apothecium production of an isolate of Sclerotinia sclerotiorum. Mycelial growth rate was greatest at $25^{\circ}C$ on potato dextrose agar (PDA) medium amended with up to 2% NaCl (${\psi}s{\leq}1.91\;MPa$) and thereafter, growth rate declined. The least number of sclerotia were produced at $20^{\circ}C$on both PDA and malt extract agar (MEA) amended with 8% NaCl (${\psi}s=6.62\;MPa$). With increasing temperature and decreasing solute potential the number and size of sclerotia were significantly reduced. The combined effect of temperature, solute potential and carbon source on sclerotia production were highly significant and had an impact on the development of the rind layer cells of sclerotia. These cells lacked a transparent cell wall which was surrounded by a compact melanized layer, and some of these cells appeared to be devoid of cell contents or were totally vacuolated. The survival of the sclerotia with increase in salinity and temperature appeared to affect melanization and the nature of the rind cells. The observations of this study re-enforces the need for an integrated disease management to control S. sclerotiorum.

• Korean Journal of Plant Resources
• /
• v.12 no.4
• /
• pp.269-275
• /
• 1999

For the purpose of sweet potato varietal improvement, yulmi, shinyulmi, gunmi, hongmi, and seonmi, whose source and sink are different, were cultivated at different planting densities, and then defoliation at initial stage of tuberous root weight increase on the relation of source and sink was observed as follows. The response of stem and leaf and tuberous root weight by planting density and defoliation rate of sweet potato varieties was different. Stem and leaf weight per m$^2$ increased along with dense planting by the following order; shinyulmi> seonmi> hongmi> gunmi> yulmi. Tuberous root number per m$^2$ was the most at 75$\times$20cm planting density, showing seonmi the most number. The number of stem and leaf and tuberous root increased along with the lowered rate of defoliation. In case of 75$\times$10cm and 75$\times$20cm planting density, tuberous root weight increased by increase of stem and leaf weight up to 50% defoliation and the difference of stem and leaf and tuberous root number was low as defoliation rate increases. The tuberous root and total dry weight matter was the most at 75$\times$20cm planting density. The increase and decrease of source synchronized with those of sink at 75$\times$10cm and 75$\times$20cm, however the relationship occurred less at 75$\times$30cm.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.11
• /
• pp.25-33
• /
• 1997

The end-to-end rate-based control mechanism is used for the flow control of the ABR service to allow much more flexibility in ATM switching system. To accommodate the ABR service effciently many algorithms such as EFCI, EPRCA, ERICA, and CAPC2 have been proposed for the switch algorithm. ABR cells and related RM cells are received at the ATM switch fabric transparently without any processing. And then cells received from the traffic source are queued in the ABR buffer of switching system. The ABR buffer usually has some thresholds for easy congestion control signal transmission. Whatever we use, therefore, these can be many ABR traffic control algorithms to implement the ABR transfer capability. The genertion of congestion indicate signal for ABR control algorithms is determined by ABR buffer satus. And ABR buffer status is determined by ABR cells transfer ratio in ATM switch fabrics. In this paper, we presented the functional structures for control of the ABR traffic capability, proposed the readout scheduling, cell slot allocation of output link and the buffer allocation model for effective ABR traffic guranteeing with considering CBR/VBR traffics in ATM switch. Since the proposed readout scheduling scheme can provide more avaliable space to ABR buffer than existing readout scheduling scheme, generation rate of a SEND signal, that is, BCN signal in destination node can be increased for ABR call connection. Therefore, the proposed scheme, in this paper, can be appropriate as algorithm for effective ABR traffic service on output link of ATM switching node.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.726-729
• /
• 2013

In this paper, low power and high slew rate CMOS rail to rail input/output opamp applicable for ouput buffer amp, in LCD source driver IC, is proposed. Proposed op-amp, is realized the characteristics of low power consumption and high slew rate adding the newly designed control stage of class-B to the conventional output stage of class-AB. From the simulation results, we know that the proposed opamp buffer can drive a 1000pF capacitive load with a 6.5V/us slew-rate, while drawing only the the power consumption of 1.19mW from 3.3V power supply.

• Journal of the Korean Ceramic Society
• /
• v.36 no.6
• /
• pp.655-661
• /
• 1999

${\beta}$-SiC formation mechanism in Si melt-C-SiC system with varying in size of carbon source was investigated. A continuous reaction sintering process using Si melt infiltration method was adopted to control the reaction sintering time effectively. It was found that ${\beta}$-SiC formation mechanism in Si melt-C-SiC system was directly affected by the size of carbon source. In the Si melt-C-SiC system with large carbon source ${\beta}$-SiC formation mechanism could be divided into two stages depending on the reaction sintering time: in early stage of reaction sintering carbon dissolution in Si melt and precipitation of ${\beta}$-SiC was occurred preferentially and then SIC nucleation and growth was controlled by diffusion of carbon throughy the ${\beta}$-SiC layer formed on graphite particle. Furthmore a dissolution rate of graphite particles in Si melt could be accelerated by the infiltration of Si melt through basal plane of graphite crystalline.

• Journal of Aquaculture
• /
• v.12 no.4
• /
• pp.317-322
• /
• 1999

A growth trial was conducted to investigate the utilization of wheat germ meal as a protein source of formulated diet for juvenile abalone (Haliotis discus hannai). Four replicate groups of the abalone average weighing 150mg were fed one of four isonitrogenous (33%) and isolipidic (6%) diets containing 0%, 10%, 20%, or 30% wheat germ meal for 18 weeks. In addition, these formulated diets were compared with commercial diet. Survival rate, weight gain, soft body weight , and shell growth of abalone fed diets containing 0%, 10%, 20%, or 30% wheat germ meal were not different (P>0.05) from those of abalonn fed the control diet and commercial diet. There were no significant differences (P>0.05) in soft body composition of moisture, protein and lipid. It si concluded that wheat germ meal were be used as a partial protein source of formulated diet for juvenile abalone.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E4
• /
• pp.215-221
• /
• 2002

The real-time modeling system, named AirWatch System, has been developed to evaluate the environmental impact from a large source. It consists of stack TMS (TeleMetering System) that measures the emission data from the source, AWS (Automatic Weather Station) that monitors the weather data and computer system with the dispersion modeling software. The modeling theories used in the system are Gaussian plume and puff models. The Gaussian plume model is used for the dispersion in the simple terrain with a point meteorological data while the puff model is for the dispersion in complex terrain with three dimensional wind fields. The AirWatch System predicts the impact of the emitted pollutants from the large source on the near-by environment on the real -time base and the alarm is issued to control the emission rate if the calculated concentrations exceed the modeling significance level.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.213-213
• /
• 2011

DC arc plasmatron is powerful plasma source to apply etching and texturing processing. Even though DC arc plasmatron has many advantages, it is difficult to apply an industry due to the small applied area. To increase an effective processing area, we suggest a DC-RF hybrid plasma system. The DC-RF hybrid plasma system was designed and made. This system consists of a DC arc plasmatron, RF parts, reaction chamber, power feeder, gas control system and vacuum system. To investigate a DC-RF hybrid plasma, we used a Langmuir probe, OES (Optical emission spectroscopy), infrared (IR) light camera. For RF matching, PSIM software was used to simulate a current of an impedance coil. The results of Langmuir probe measurements, we obtain a homogeneous plasma density and electron temperature those are about $1{\times}1010$ #/cm3 and 1~4 eV. The DC-RF hybrid plasma source is applied for plasma etching experimental, and we obtain an etching rate of 10 ${\mu}m$/min. through a 90 mm of reaction chamber diameter.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1347-1360
• /
• 2018

Owing to limited energy in wireless devices power saving is very critical to prolong the lifetime of the networks. In this regard, we designed a cross-layer optimization mechanism based on power control in which source node broadcasts a Route Request Packet (RREQ) containing information such as node id, image size, end to end bit error rate (BER) and residual battery energy to its neighbor nodes to initiate a multimedia session. Each intermediate node appends its remaining battery energy, link gain, node id and average noise power to the RREQ packet. Upon receiving the RREQ packets, the sink node finds node disjoint paths and calculates the optimal power vectors for each disjoint path using cross layer optimization algorithm. Sink based cross-layer maximal minimal residual energy (MMRE) algorithm finds the number of image packets that can be sent on each path and sends the Route Reply Packet (RREP) to the source on each disjoint path which contains the information such as optimal power vector, remaining battery energy vector and number of packets that can be sent on the path by the source. Simulation results indicate that considerable energy saving can be accomplished with the proposed cross layer power control algorithm.