• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.161-166
• /
• 2002

Bioremediation of trace metals in groundwater may require the manipulation of redox conditions via the injection of a carbon source. To simulate the numerous biogeochemical processes that will occur during the bioremediation of trace-metal-contaminated aquifers, a reactive transport model has been developed. The model consists of a set of coupled mass balance equations, accounting for advection, hydrodynamic dispersion, and a kinetic formulation of the biological or chemical transformations affecting an organic substrate, electron acceptors, corresponding reduced species, and trace metal contaminants of interest, uranium in this study. The redox conditions of the domain are characterized by estimating the pE, based on the concentrations of the dominant terminal electron acceptor and its corresponding reduced specie. This pE and the concentrations of relevant species we then used by a modified version of MINTEQA2, which calculates the speciation/sorption and precipitation/dissolution of the species of interest under equilibrium conditions. Kinetics of precipitation/dissolution processes are described as being proportional to the difference between the actual and calculated equilibrium concentration.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.410.1-410.1
• /
• 2014

A soft-lithographic top-down approach is combined with an epitaxial layer transfer process to fabricate high quality III-V compound semiconductor nanowires (NWs) and integrate them on Si/SiO2 substrates, using MBE-grown ultrathin InAs as a source wafer. The channel width of the InAs nanowires is controlled by using solvent-assisted nanoscale embossing (SANE), descumming, and etching processes. By optimizing these processes, the NW width is scaled to less than 50 nm, and the InAs NWFETs has ${\sim}1,600cm^2/Vs$ peak electron mobility, which indicates no mobility degradation due to the size.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 춘계학술대회 논문집
• /
• pp.209-217
• /
• 1994

The present study is concerned with the characteristics of the high speed precision bar cropping. This process is a practical application of High Energy Rate Forming in which the impact energy source is given by internal combustion engine. To enhance the added value of product, the recent forging fields trend toward the near net shape processes through the cold and closed die forging. For the purpose of these processes the precedent process is to obtain the precision billet which has little weight deviation and defect. The accuracy of initial billet by bar cropping depends upon the process parameters and die design technology. Therefore, in order to investigate the effect of process parameters upon product quality, the cropping experiments are carried out according to the various parameters such as billet clearence, billet length, billet material, cropping speed and so on. From these results some criteria of the optimal die design for the product of good quality are suggested.

• Molecules and Cells
• /
• 제38권4호
• /
• pp.285-296
• /
• 2015

Oxidative stress has been linked to the pathogenesis of diabetic nephropathy, the complication of diabetes in the kidney. NADPH oxidases of the Nox family, and in particular the homologue Nox4, are a major source of reactive oxygen species in the diabetic kidney and are critical mediators of redox signaling in glomerular and tubulointerstitial cells exposed to the diabetic milieu. Here, we present an overview of the current knowledge related to the understanding of the role of Nox enzymes in the processes that control mesangial cell, podocyte and tubulointerstitial cell injury induced by hyperglycemia and other predominant factors enhanced in the diabetic milieu, including the renin-angiotensin system and transforming growth factor-${\beta}$. The nature of the upstream modulators of Nox enzymes as well as the downstream targets of the Nox NADPH oxidases implicated in the propagation of the redox processes that alter renal biology in diabetes will be highlighted.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2003년도 춘계 학술발표회 논문집
• /
• pp.27-31
• /
• 2003

During the past decade, integrated stratigraphy has been effectively applied to many sedimentary basins to analyze stratigraphic response to tectonic evolution. This application has been beneficial to hydrocarbon exploration in the basins because it provides a better understanding of temporal and spatial relationships of hydrocarbon source and reservoir rocks as a function of basin evolution. Like the maturation, migration, and trapping of hydrocarbons, ore-forming processes in hydrothermal deposits may be causally linked to particular phases of basin evolution. Consequently, applying integrated stratigraphy to mineral exploration may be a logical and helpful approach to understanding ore-forming processes and predicting their occurrence, location, and origin. (omitted)

• 한국지형학회지
• /
• 제23권1호
• /
• pp.35-45
• /
• 2016

Aiming to elucidate the formation processes of Myeonsan wetland around the ridge from Myeonsan peak to Seokgae pass, this paper analyzes the geomorphic, physical and chemical characteristics of the wetland. The results are as follow: Firstly, resistant bedrock and big boulders distributed on the riverbed of the small channel from the wetland to Seokgaecheon have played a role as a temporary base level. At the upstream part above this point, a wide and shallow depression was formed and developed into a wetland. There was a gorge covered with boulders at downstream part. Secondly, owing to the obstacles at the outlet of wetland, deposits on bed tend to be downstream coarsening. Finally, deposits show weak acidity of pH 5.0~5.7. The source of wetland water is groundwater containing rich Ca and Na. Trees in the wetland help much more Ca accumulated. And deposit biotite and amphibole contained rich Mg have been weathered in the wetland.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2000년도 International Symposium:on the Maritime Management Systems for Safer and Cleaner Seas in the New Millennium
• /
• pp.27-36
• /
• 2000

Managing quality is nothing new, but it increasingly become more challenging. Demands form customers, flatter organizations, measuring and assessing outcomes, stiffer competition for resources, technology, environmental concerns and others, all have created changes in the workplace for which enhanced leadership is needed. TQM, CQI, TQL, (managing quality), other acronyms can be summarized as a means of moving an organization into the new millennium with a keen focus on people, service, efficiencies, effectiveness and excellence. It is not an accident. It is the result of a clear, well-directed strategically focused thinking. Attention to quality encourages individuals and teams throughout organizations to continually learn, think and contribute ideas on how to explore processes that affect them. The organization must change into a learning organization that seeks to continually improve its processes and services. This learning attitude requires a cultural shift from autocratic to more participatory leadership. This presentation will examine the principles and lessons learned form implementation of quality initiatives from different organizations. Many of the themes shared are independent of the source and, as such, may be helpful in validating what you are doing or give you ideas on leading and implementing change within your organizations.

• Journal of Information Processing Systems
• /
• 제17권6호
• /
• pp.1071-1082
• /
• 2021

Since the smart factory has been recently recognized as an industrial core requirement, various mechanisms to ensure efficient and stable operation have attracted much attention. This attention is based on the fact that in a smart factory environment where operating processes, such as facility control, data collection, and decision making are automated, the disruption of processes due to problems such as facility anomalies causes considerable losses. Although many studies have considered methods to prevent such losses, few have investigated how to effectively apply the solutions. This study proposes a Kubernetes based system applied in a smart factory providing effective operation and facility management. To develop the system, we employed a useful and popular open source project, and adopted deep learning based anomaly detection model for multi-sensor anomaly detection. This can be easily modified without interruption by changing the container image for inference. Through experiments, we have verified that the proposed method can provide system stability through nondisruptive maintenance, monitoring and non-disruptive updates for anomaly detection models.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.10-20
• /
• 2022

Recently, metal additive manufacturing (AM) is being investigated as a new manufacturing technology. In metal AM, powder bed fusion (PBF) is a promising technology that can be used to manufacture small and complex metallic components by selectively fusing each powder layer using an energy source such as laser or an electron beam. PBF includes selective laser melting (SLM) and electron beam melting (EBM). SLM uses high power-density laser to melt and fuse metal powders. EBM is similar to SLM but melts metals using an electron beam. When these processes are applied, the mechanical properties and microstructures change due to the many parameters involved. Therefore, this study is conducted to investigate the effects of the parameters on the mechanical properties and microstructures such that the processes can be performed more economically and efficiently.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.166-177
• /
• 1997

The high strength AlZnMgCu0.5 alloy is a light metal with good age hardenability, and has a high tensile and yielding strength. Therefore, it can be used for structures requiring high speciple strength. Even though high strength AlZnMgCu alloy has good mechanical properties, it has a lot of problems in TIG and MIG welding processes. Since lots of high heat absorption is introduced into the weldment during TIG and MIG processes, the microstructural variation and hot cracks take place in heat affected zone. Therefore, the mechanical properties of high strength AlZnMgCu0.5 alloy can be degraded in weldment and heat affected zone. Welding process utilizing high density heat source such as electron beam should be developed to reduce pore and hot cracking, whichare usually accompanied by MIG and TIG welding processes. In this work, electron beam welding process were used with or without AlMg4.5Mn as filler material to avoid the degradation of mechanical properties. Mechanical and metallurgical characteristics were also studied in electron beam weldment and heat affected zone. Moreover hot cracking mechanism was also investigated.