• 한국콘텐츠학회논문지
• /
• 제20권8호
• /
• pp.522-537
• /
• 2020

조선 왕조는 명나라, 청나라와 여러 차원의 긴밀한 교류를 가졌으며, 가구 조형 디자인의 발전 과정에서 같은 문화적 원천과 상호 왕래, 동일한 요소들이 서로의 가구 조형에서 나타나고 있다. 본 논문은 '조선시대 후기 가구'와 '명식(明式) 가구'를 연구 주제로 탁자(卓子)류 가구를 구체적인 연구 대상으로 삼아 양국 교류사의 연구를 결합한 '유사성'의 시각에서, 전체적 디자인과 부분적 디자인 두 가지 측면에서 양국 전통 가구의 조형 디자인을 검토했다. 구체적인 사례 분석에서 조선시대 소반(小盤), 경상(經床), 연상(硯床) 등의 탁자(卓子)류 가구는 명청시대의 항탁(炕桌), 방탁(方卓), 주탁(酒桌) 등 탁자(卓子)류 가구와 전체적인 조형 디자인에서 유사성을 나타냈다. 부분적인 디자인은 비슷한 두 나라의 가구의 안면(案面), 운각(雲角), 두루마리(卷筒), 다리(足) 등에서 유사성을 잘 보여주고 있다. 본 논문은 '풍혈(風穴)' 조형물의 연원(淵源)을 추정함으로써 한국 전통가구 문화에 대한 연구의 폭을 넓히고자 했다. 한중간에 다방면에 걸친 교류가 확대되고 있는 현실을 감안할 때, 전통가구에서 유사성을 탐색하는 것은 양국의 문화교류 과정을 분석하고 교류를 활성화하는 일에 도움이 될 것이다.

• 환경영향평가
• /
• 제20권1호
• /
• pp.25-36
• /
• 2011

In this study, the accurate water quality analysis in rivers, including the non-point source is performed. First of all, watershed model, SWAT(Soil and Water Assessment Tool) was applied to analyze the impact of the non-point source in study area. And then, water quality analysis integrating the point source and the non-point source is implemented using QUALKO model. For more exact simulation, it should be the calibration and verification of variables and parameters which are needed for simulation. In addition, the importance of considering the non-point source was confirmed in river water quality simulation. BOD, TN, TP were analysed, and the results shows that BOD, TN and TP concentration was increased to 16.8%, 8.2% and 25.8% respectively. The more accurate estimate will be carried if use of reliable measurements and watershed simulation be done in models linking process. The suggested technique will improve the accuracy of the water quality analysis. The methodologies presented in this study will contribute to basin-wide water quantity and quality management.

• 정보처리학회논문지A
• /
• 제12A권7호
• /
• pp.589-596
• /
• 2005

임베디드 소프트웨어는 하드웨어 플랫폼에 탑재하기 전, 소스 코드에 대한 품질을 검증하는 작업이 매우 중요하다. 임베디드 소프트웨어의 코드 품질을 향상시키기 위해서는 분석 및 설계 단계의 모델에 대한 품질과 생성된 코드에 대한 품질이 관리되어야 한다. 본 연구에서는 임베디드 소프트웨어의 소스 코드 품질을 향상시키기 위한 방법으로 Practice Pattern을 제안한다. 이는 모델링 과정이나 코딩 과정에서 개발자를 가이드 하는 절차 패턴으로써, 모델의 품질과 소스 코드 품질을 향상시키는 방법으로 사용될 수 있다. 제시하는 패턴의 적용은 기능의 정확성뿐만 아니라 성능, 모듈화, 재사용성 및 이식성 등과 같은 품질 요소들을 향상시킬 수 있을 것으로 보인다.

• Wind and Structures
• /
• 제27권6호
• /
• pp.417-430
• /
• 2018

The concentration fields in the proximities of a local gas emission source are experimentally analyzed in several combinations of wind incidences and source emissions. These conditions are determined by the plume buoyancy, emission velocity and incident flow wind speed. Concentration measurements are performed by an aspirating probe in a boundary layer wind tunnel. The analysis included the mean concentration values and the intensity of concentration fluctuations in a neutral atmospheric boundary layer flow. Different configurations are tested: an isolated stack in a homogeneous terrain and a stack with a bluff body in close proximity, located windward and leeward from the emission source. The experimental mean concentration values are contrasted with Gaussian profiles and the dilution factor is analyzed with respect to the empirical curves of the minimum dilution. Finally, a study on the plume intermittency is performed in a cross-sectional plane near the emission source. It is possible to highlight the following observations: a) plume vertical asymmetry in the case of an isolated emission source, b) significant differences in the dispersion process related to the relative location of the emission source and bluff body effects, and c) different probabilistic behavior of the concentration fluctuation data in a cross-sectional measurement plane inside the plume.

• 한국BIM학회 논문집
• /
• 제5권2호
• /
• pp.19-25
• /
• 2015

The purpose of this study is to design simple BIM query language for visualizing BIM information as the viewpoint of use-cases by using open source viewer cost-effectively. recently, the studies related to the facility management using BIM are being researched world-widely. In this studies, it's important to develop the BIM query to obtain the needed data from BIM database. To implement it, the trends in related studies were reviewed and the open source-based BIM viewer architecture was analyzed. And then the architecture considering the simple BIM Query Language (sBQL) was designed to represent the geometry and property of the BIM database. Lastly, the system by using the proposed sBQL grammar was developed.

• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.55-60
• /
• 2005

A three-dimensional Gaussian heat source model is modified to include the effects of the gap and thickness-difference for the laser keyhole welding. The gap of the butt joint influences the welding efficiency such that the melting area decreases linearly with the gap. When the different plate thickness is used such as the tailored blank welding, melting areas of the thick and thin plates are predicted by introducing the thickness-difference factor. The calculated results using the modified heat source show reasonably good agreements with the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.280-282
• /
• 2005

Micro-source units having power ratings in thousands of watts can provide even higher reliability and fuel efficiency than the conventional large scale units. These units are also clustered with loads creating micro-grid services to customer sites such as office buildings, industrial parks and homes. Micro-sources adopt voltage source inverter to ensure the power quality of sensitive loads. This paper deals with the connection of micro-sources into the system grid. Modeling and simulation of the grid connected micro-sources at the power frequency range are investigated. Simulation results show that the micro-grid system with two micro-sources has good dynamic characteristics.

• 한국대기환경학회지
• /
• 제16권5호
• /
• pp.477-485
• /
• 2000

The data set was collected on fifty-eight different days with a 24-h sampling period from October 27, 1995 through August 25, 1996. From the chemical mass balance (CMB) analysis of $PM_{2.5}$ in the Chongju area, the contributions from soil, gasoline, diesel, light and heavy oil combustion were 2.6%, 15.4%, 9.0%, 28.8% and 1.5%, respectively. Residual $NO_{3}^{-}$), residual $SO_{4}^{2-}$ and residual OC, possibly formed in the atmosphere. represented additional 8.0, 10.2, and 1.6% of the $PM_{2.5}$, respectively. Other unidentified sources constituted the remaining 22.9%. From the CMB analysis, the $PM_{2.5}$ source contribution for fall, winter, spring and summer were 92, 76.8, 77.5 and 59.2%, respectively.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1623-1629
• /
• 2003

In this paper, the arc beam is considered as a moving disc heat source with a pseudo-Gaussian distribution of heat intensity. The solution for temperature distribution on welds is derived by using the image heat source method and the superposition method. It is general solution in that it can determine the temperature-rise distribution in and around the arc beam heat source, as well as the width and depth of the melt pool (MP) and the heat-affected zone (HAZ) in welding short lengths, where quasi-stationary conditions may not have been established. As a comparative study, the results of this analytical approach has been compared with that of the finite-element modeling. As a result, The theoretical analysis presented here has shown good consistency and is more time/cost-effective method compared with FEM.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.437-440
• /
• 2008

In recent years, pollution load calculation has become a topic for research that resulted in the development of numerous GIS modeling methods. The existing pollution method for nonpoint source (NPS) can not be indentified and calculated the amount of the pollution precisely. This research shows that the association of typical pollutant concentrations with land uses in a watershed can provide a reasonably accurate characterization of nonpoint source pollution in the watershed using Expected Mean Concentrations (EMC). The GIS based pollution assessment method is performed for three pollutant constituents: BOD, TN, and TP. First, the runoff grid by means of the precipitation grid and runoff coefficient is estimated. Then, the NPS pollution loads are calculated by grid based method. Finally, the final outputs are evaluated by statistical technique. The results illustrate the merits of the approach. This model verified that GIS based method of estimating spatially distributed NPS pollution loads can lead to more accurate representation of the real world.