• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.769-778
• /
• 2005

The velocity and pressure fields of a ship's Weis-Fogh type propulsion mechanism are studied in this paper using an advanced vortex method. The wing (NACA0010 airfoil) and channel are approximated by source and vortex panels. and free vortices are introduced away from the body surfaces. The viscous diffusion of fluid is represented using the core-spreading model to the discrete vortices. The velocity is calculated on the basis of the generalized Biot-Savart law and the pressure field is calculated from an integral, based on the instantaneous velocity and vorticity distributions in the flow field. Two-dimensional unsteady viscous flow calculations of this propulsion mechanism are shown. and the calculated results agree qualitatively with the measured thrust and drag due to un-modeled large fluctuations in the measured data.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1407-1412
• /
• 2004

The velocity and pressure fields of a ship's propulsion mechanism of Weis-Fogh type are studied by advanced vortex method. The wing of NACA0010 type and the channel are approximated by a finite of source and vortex panels, and the free vortices are introduced from the surface of their bodies. The viscous diffusion of fluid is represented by the core-spreading method. The velocity field is calculated on the basis of Biot-Savart law and the pressure field is calculated from the integration equation formulated by Uhlman. The flow fields of this propulsion mechanism are unsteady and complex, but the flow fields are clarified by numerical simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1031-1032
• /
• 2007

Gap servo NF (Near Field) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve higher NA, SIL (Solid Immersion Lens) is used. In the case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. Because of very small gap distance between SIL bottom and the surface of media, relative tilt tolerance is limited. In this paper, we presented 2-axis tilt mechanism for skew adjustment within small tilt margin.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.305-310
• /
• 2005

The velocity and pressure fields of a ship's propulsion mechanism of the Weis-Fogh type, in which a airfoil moves reciprocally in a channel, are studied in this paper using the advanced vortex method. The airfoil and the channel are approximated by a finite number of source and vortex panels, and the free vortices are introduced from the body surfaces. The viscous diffusion of fluid is represented using the core-spreading model to the discrete vortices. The velocity is calculated on the basis of the generalized Biot-Savart low and the pressure field is calculated from integrating the equation given by the instantaneous velocity and vorticity fields. Two-dimensional unsteady viscose flows of this propulsion mechanism are numerically clarified, and the calculated results agree well with the experimental ones.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.1
• /
• pp.159-177
• /
• 1995

The objective of this paper is to propose a knowledge-based fuzzy post adjustment so that unstructured problems can be solved more realistically by expert systems. Major part of this mechanism forcuses on fuzzily assessing the influence of various external factors and accordingly improving the solutions of unstructured problem being concerned. For this purpose, three kinds of knowledge are used : user knowledge, expert knowledge, and machine knowledge. User knowledge is required for evaluating the external factors as well as operating the expert systems. Machine knowledge is automatically derived from historical instances of a target problem domain by using machine learning techniques, and used as a major knowledge source for inference. Expert knowledge is incorporate dinto fuzzy membership functions for external factors which seem to significantly affect the target problems. We applied this mechanism to a prototyoe expert system whose major objective is to provide expert guidance for stock market timing such as sell, buty, or wait. Experiments showed that our proposed mechanism can improve the solution quality of expert systems operating in turbulent decision-making environments.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.111-119
• /
• 2014

This paper describes the design and implementation of a electromagnetic energy harvesting mechanism and electronic circuit for autonomous emergency call system. This analysis results show the power output of the proposed harvesting mechanism and circuit up to max power output 5V and it can hold up to 65 msec of the power generation and 10msec of the RF transmission. Based on the these testing results, the implementation of autonomous emergency call device without battery power or any external power source is feasible.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.927-932
• /
• 2009

Wind turbine noise become main environmental problem as wind energy have been installed all around. Noise from large wind turbine give annoyance to listener, moreover it increase loading to whole system by restricting blade tip speed. However accurate noise mechanism of wind turbine is not yet examined. This paper reviewed noise source and analysis theory. Broadband noise if main component of wind turbine noise and airfoil self noise is main noise source. These make acoustic analogy hard to apply for analysis. For this reason, experimental equation is method for wind turbine noise prediction up to now. Spectrum analysis shows that vortex shedding noise exists around $1k{\sim}2k$ Hz. This region is most sensitive frequency range to human. Thus it is necessary to reduce this noise source.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.985-988
• /
• 2008

Metal induced crystallization of a-Si with a source of Ni/Si oxide was studied. Its mechanism to induce crystallization was discussed. It was found that new source behaves an effect of self-released nickel and reducing nickel residua, so can provide a wider process tolerance; improve the uniformity and stability of TFTs.

• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.29-42
• /
• 1994

Discrimination studies between microearthquakes and underground explosions are carried out in the pure-continental path of north-south within the Korean Peninsula. The characteristic waveforms for explosions and microearthquakes are investigated in the light of observation and synthetic seismograms. The characteristic waveform generation is minnly a function of source mechanism and ray-path and former influences more strongly than the latter.A double-couple source mechanism for microeatthquakes and a single-couple(force) mechanism for explosions are presented in this study. It is found for very shallow events to have outstanding of $L_g$ waves in the transverse components that pass through the upper crust with period of 1 - 6 seconds and fundamental modes of Rayleigh waves, $R_g$ in the vertical component with period 8-12 seconds. Furthermore it is pointed out that the first arrival amplitudes of SH waves for explosions are always srnall regardless of azimuth of stations since there is non-existence of nodal lines for the explosion mechanism. Theoretical seismograms for explosions show the first motions of compression with short wavelengths as well as mostly fundamental modes of Rayleight waves, $R_g$ waves and $L_g$ waves, whereas those of micro-earthquakes give either compression or dilatation according to the ack azimuth epicenter to stations and poor or non $R_g$ waves and complicated $L_g$ waves, depending on the focal depth.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1120-1130
• /
• 2004

Distributed Denial-of-Service(DDoS) attack prevent users from accessing services on the target network by spoofing its origin source address with a large volume of traffic. The objective of IP Traceback is to determine the real attack sources, as well as the full path taken by the attack packets. Existing IP Traceback methods can be categorized as proactive or reactive tracing. Existing proactive tracing scheme(such as packet marking and messaging) prepares information for tracing when packets are in transit. But, these scheme require additional network overhead. In this paper, we propose a "advanced Traceback" mechanism, which is based on the modified Pushback system with secure router mechanism. Proposed mechanism can detect and control DDoS traffic on router and can generate marked packet for reconstructing origin DDoS attack source, by which we can diminish network overload and enhance Traceback performance.