• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.25-33
• /
• 2001

Loop-loop electromagnetic (EM) survey in frequency domain has been carried out in order to provide basic solution to geotechnical applications. Source and receiver configuration may be horizontal co-planar (HCP) and/or vertical co-planar (VCP). Three quadrature components of mutual impedance ratio for each configuration are used to construct the subsurface image. For the purpose of obtaining the model response and validating the reasonable performance of the inversion, we obtained each responses of two-layered and three-layered earth models and two-dimensional (2-D) isolated anomalous body. The response of 2-D isolated anomalous body has been calculated using extended Born approximation for the solution of 2.5-D integral equation describing EM scattering problem. As a result of the least-squares inversion with variable Lagrangian multiplier, we could construct more resolvable image from HCP data than VCP data. Furthermore, joint inversion of HCP and VCP data made better stability and resolution of the inversion. Resistivity values, however, did not exactly match the true ones. Loop-loop EM field data was obtained with EM34-3XL system manufactured by Geonics Ltd. (Canada). Electrical resistivity survey was conducted on the same line for the comparison in advance. Since the constructed image from loop-loop EM data by 2-D inversion algorithm showed almost similar resistivity distribution to that from electrical resistivity one, we expect the developed 2.5-D loop-loop EM inversion program can be applied for the reconnaissance site survey.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.93-98
• /
• 2008

Abstract: Surface topography has a significant influence on seismic wave propagation in a reflection seismic exploration. Effects of surface topography on two-dimensional elastic wave propagation are investigated through modeling using a weighted-averaging (WA) finite-element method (FEM), which is computationally more efficient than conventional FEM. Effects of air layer on wave propagation are also investigated using flat surface models with and without air. To validate our scheme in modeling including topography, we compare WA FEM results for irregular topographic models against those derived from conventional FEM using one set of rectangular elements. For the irregular surface topography models, elastic wave propagation is simulated to show that breaks in slope act as a new source for diffracted waves, and that Rayleigh waves are more seriously distorted by surface topography than P-waves.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.299-308
• /
• 2002

We have derived an analytical expression for the sensitivity of the frequency domain small-loop electromagnetic (EM) surveys over a two-layer earth in order to estimate the depth of investigation with an instrument having the source-receiver separation of about 2 m. We analyzed the sensitivities to the lower layer normalized by those to the upper half-space and estimated the depth of investigation from the sensitivity analyses and the mutual impedance ratio. The computational results showed that the in-phase components of the sensitivity to the lower layer dominates those to the upper layer when the thickness of the upper layer is less than 20 m, while the quadrature components are not sensitive to the lower layer over the entire frequency range. Hence we confirmed that the accurate measurement of the in-phase component is essential to increase the depth of investigation in the multi-frequency small-loop EM survey. When conductive basement of 10 ohm-m underlies the upper layer of 100 ohm-m, an accurate measurement of the in-phase components ensures the depth of the investigation more than 10 m even accounting a noise effect, from which we conclude that the small-loop EM survey is quite effective in imaging the conductive plume down to a considerable depth. On the other hand, in the presence of the resistive basement of 1,000 ohm-m, the depth of investigation may not exceed 5 m considering the instrumental accuracy, which implies that the application of the small-loop EM survey is not recommended over the resistive environment other than detecting the buried conductor.

• Journal of KIISE:Databases
• /
• v.37 no.3
• /
• pp.146-164
• /
• 2010

Due to an increasing volume of XML data, it is considered prudent to store XML data on an industry-strength database system instead of relying on a domain specific application or a file system. For shredded XML data stored in relational tables, however, it may not be straightforward to apply existing algorithms for twig query processing, since most of the algorithms require XML data to be accessed in a form of streams of elements grouped by their tags and sorted in a particular order. In order to support XML query processing within the common framework of relational database systems, we first propose several bitmap indexes and their strategies for supporting holistic twig joining on XML data stored in relational tables. Since bitmap indexes are well supported in most of the commercial and open-source database systems, the proposed bitmapped indexes and twig query processing strategies can be incorporated into relational query processing framework with more ease. The proposed query processing strategies are efficient in terms of both time and space, because the compressed bitmap indexes stay compressed during data access. In addition, we propose a hybrid index which computes twig query solutions with only bit-vectors, without accessing labeled XML elements stored in the relational tables.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.71-81
• /
• 2002

The lack of specialties of the existing commercial web search systems stems from the fact that they have no capabilities to extract and gather the meaningful information from each information domain they cover. We are sure, however, that the necessity for the information integration system, not just search system, will be likely to become larger in the future. In this paper, we propose a design and implementation of an information integration system called TIC(target information collector). TIC is able to extract meaningful information from a specific information area in the internet and integrate them for the commercial service. We also show the evaluation results of our implementation. For the experiments we applied our TIC to the international procurement information area. The international procurement information is publicly and freely announced by each government to the world. To automatically extract common properties from the related source sites, we adopt information pointing technique using inter-HTML tag pattern parsing. And through the information integration framework design, we can easily implement a site-specific information integration engine. By running our TIC for about 8 months, we find out it can remove considerable amount of the duplicated information, and as a result, we can obtain high quality international procurement information. The main contribution of this paper is to present a framework design and it's implementation for extracting the information of a specific area and then integrating them into a meaningful one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.211-218
• /
• 2014

Recently, software-based programmable logic controller (PLC) systems, which are implemented in standard PLC languages on general hardware, are gaining popularity because they overcome the limitations of classical hardware PLC systems. Another noticeable trend is that the use of integrated development environment (IDE) is becoming important. IDEs can help developers to easily manage the growing complexity of modern control systems. Furthermore, industrial Ethernet, e.g. EtherCAT, is becoming widely accepted as a replacement for conventional fieldbuses in the distributed control domain because it offers favorable features such as short transmission delay, high bandwidth, and low cost. In this paper, we implemented the extension of open source IDE, called Beremiz, for developing EtherCAT-based real-time, synchronized motion control applications. We validated the EtherCAT system management features and the real-time responsiveness of the control function by using commercial EtherCAT drives and evaluation boards.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.247-260
• /
• 2003

To share and standardize information, especially in the database environments, MDR (Metadata Registry) can be used to integrate various heterogeneous databases within a particular domain. But due to the discrepancies of data element representation between organizations, global information integration is not so easy. And users who are searching integrated information on the Web have limitation to obtain schema information for the underlying source databases. To solve those problems, in this paper, we present a 3-layered Information Integration System (LI2S) based on MDRs and Ontology. The purpose of proposed architecture is to define information integration model, which combine both of the nature of MDRs standard specification and functionality of ontology for the concept and relation. Adopting agent technology to the proposed model plays a key role to support the hierarchical and independent information integration architecture. Ontology is used as for a role of semantic network from which it extracts concept from the user query and the establishment of relationship between MDRs for the data element. (MDR and Knowledge Base are used as for the solution of discrepancies of data element representation between MDRs. Based on this architectural concept, LI2S was designed and implemented.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.11
• /
• pp.457-464
• /
• 2021

The advent of the big data era has enabled the rapid development of deep learning that learns rules by itself from data. In particular, the performance of CNN algorithms has reached the level of self-adjusting the source data itself. However, the existing image processing method only deals with the image data itself, and does not sufficiently consider the heterogeneous environment in which the image is generated. Images generated in a heterogeneous environment may have the same information, but their features may be expressed differently depending on the photographing environment. This means that not only the different environmental information of each image but also the same information are represented by different features, which may degrade the performance of the image analysis model. Therefore, in this paper, we propose a method to improve the performance of the image color constancy model based on Adversarial Learning that uses image data generated in a heterogeneous environment simultaneously. Specifically, the proposed methodology operates with the interaction of the 'Domain Discriminator' that predicts the environment in which the image was taken and the 'Illumination Estimator' that predicts the lighting value. As a result of conducting an experiment on 7,022 images taken in heterogeneous environments to evaluate the performance of the proposed methodology, the proposed methodology showed superior performance in terms of Angular Error compared to the existing methods.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.991-998
• /
• 2022

The purpose of this study is to develop GPU (Graphics Processing Unit) acceleration technique for 2-dimensional model and to assess the effectiveness for high resolution flood simulation in wide area In this study, GPU acceleration technique was implemented in the G2D (Grid based 2-Dimensional land surface flood model) model, using implicit scheme and uniform square grid, by using CUDA. The technique was applied to flood simulation in Jinju-si. The spatial resolution of the simulation domain is 10 m × 10 m, and the number of cells to calculate is 5,090,611. Flood period by typhoon Mitag, December 2019, was simulated. Rainfall radar data was applied to source term and measured discharge of Namgang-Dam (Ilryu-moon) and measured stream flow of Jinju-si (Oksan-gyo) were applied to boundary conditions. From this study, 2-dimensional flood model could be implemented to reproduce the measured water level in Nam-gang (Riv.). The results of GPU acceleration technique showed more faster flood simulation than the serial and parallel simulation using CPU (Central Processing Unit). This study can contribute to the study of developing GPU acceleration technique for 2-dimensional flood model using implicit scheme and simulating land surface flood in wide area.

• The Plant Pathology Journal
• /
• v.39 no.4
• /
• pp.361-373
• /
• 2023

In plant-pathogen interactions, Magnaporthe oryzae causes blast disease on more than 50 species of 14 monocot plants, including important crops such as rice, millet, and most 15 recently wheat. M. oryzae is a model fungus for studying plant-microbe interaction, and the main source for fungal pathogenesis in the field. Here we report that MoJMJD6 is required for conidium germination and appressorium formation in M. oryzae. We obtained MoJMJD6 mutants (ΔMojmjd6) using a target gene replacement strategy. The MoJMD6 deletion mutants were delayed for conidium germination, glycogen, and lipid droplets utilization and consequently had decreased virulence. In the ΔMojmjd6 null mutants, global histone methyltransferase modifications (H3K4me3, H3K9me3, H3K27me3, and H3K36me2/3) of the genome were unaffected. Taken together, our results indicated that MoJMJD6 function as a nuclear protein which plays an important role in conidium germination and appressorium formation in the M. oryzae. Our work provides insights into MoJMJD6-mediated regulation in the early stage of pathogenesis in plant fungi.