• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.638-643
• /
• 2011

The aluminum soundproofing panel used to the traffic noise reduction will judge with the material to improve because the CO2 emission is greater than other soundproofing panel such as plastic soundproofing panel. Also, if the air-passing soundproofing panel which can endure the fast wind velocity will be developed, it judged that it can reached to the target of low CO2 traffic technology development using the reduction of material cost and the lower consumption of steel. The objective of this study is to improve the soundproofing panel and to develop the air-passing soundproofing panel for the replacement of aluminum sound proofing panel which is more emit CO2 than other soundproofing panel. And, we tried to develop the reduction technology of CO2 emission through the development of air-passing soundproofing panel. At first, the flow and noise simulation were conducted for the purpose of the calculation of wind pressure on soundproofing wall and noise exposure level on receiver points according to the open ratio of air-passing soundproofing panel. And the 1st and 2nd mockup of air-passing soundproofing panel were made, and the design load test were conducted for these mockup.

• 환경영향평가
• /
• 제22권4호
• /
• pp.361-367
• /
• 2013

Noise and vibration occurs during construction intermittently, but with the most arise complaints. There is a need to efficiently manage the construction noise and vibration problems because in case a residential facility that requires calmness around the construction site adversely affects the living conditions of nearby residents. The ministry of environment has mandating the installation of soundproofing facilities for the management of construction noise. In order to enforce a particular construction, the mandatory install with soundproofing facilities before the start of construction, and after construction. However, Installation guide of soundproofing facilities for construction sites were not considered affected areas by noise and there is no provision of performance evaluation for soundproofing facilities. In this study, investigated the status and problems of the installation guide for soundproofing facilities in construction sites, we propose an efficient installation guide of soundproofing facilities for the reduction construction noise.

• 한국조경학회지
• /
• 제35권2호통권121호
• /
• pp.64-70
• /
• 2007

The main purposes of this paper are to determine the major factors influencing visual preference in soundproofing barriers in urban places and to provide the essential information needed in the design process of soundproofing harriers. This paper consists of two phases. The first phase presents photos of the seven types of soundproofing barriers generally seen around the Daejeon area, which were taken from three places for a photo montage. The evaluation of 21 different soundproofing barriers was conducted by college students. The second phase of this paper depicts the analysis process. Firstly, the visual preferences as found from the collected data were evaluated by five semantic degrees. The evaluated data were processed by descriptive test, a correlation test and ANOVA test methods using an SPSS statistical package. 1. Currently, visual preference in soundproofing barriers is low in urban places. Therefore, it is necessary to design visually pleasing soundproofing barriers to improve the visual qualify of urban areas. 2. Soundproofing barriers of mixed wood and acrylic scored the highest among selections while those with aluminium steel scored the lowest. 3. Environmental friendly and transparent conditions should be met to allow soundproofing barriers to be visually pleasing.

• 한국지반환경공학회 논문집
• /
• 제12권3호
• /
• pp.27-35
• /
• 2011

본 연구는 터널발파에서 소음저감을 목적으로 설치되는 방음시설 개발을 위하여 현장에서 주로 사용되는 방음재와 물, 모래 등을 이용하여 각 재질에 따른 소음저감효과를 판단하였다. 최대 소음레벨과 주파수의 범위를 측정하여 방음재질별 소음감쇠도와 주주파수 대역의 음압레벨을 고찰하였다. 그리고, 방음재료 분석의 결과를 반영하여 물과 스펀지 등으로 채운 개량형 워터튜브 방음문과 기존 스펀지 부직포 등으로 채운 방음문을 축소 제작하여 화약을 사용하여 실대형 현장실험을 통한 검증을 하였다. 그 결과 물을 차음재료로 사용한 경우에 기존 방음문에 비해 약 10dB(A) 정도의 소음 저감효과를 나타내었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.658-663
• /
• 2011

The purpose of this study is to develop an air-passing soundproofing panel with more improved structure to reduce the $CO_2$ emission and installation cost. To reduce the emission of $CO_2$ ; it is suggested to choose low $CO_2$ emission material relative to the aluminum and to reduce the materials by developing a specially designed air-passing soundproofing panel structure. First of all, we performed the flow analysis to predict the wind pressure according to the open angle of the air-passing soundproofing panel and the noise level analysis at the receiver point. To verify the simulation, a prototype of the soundproofing panel was made. The flow test in the wind tunnel and load test were performed. The economic evaluation for the installation of the air-passing soundproofing panel was performed and specifications of the installation was prepared. As the results of this research, it was verified that the wind load was reduced about 40% to that of the conventional one at 25m/s wind speed in the wind tunnel test. By applying the 4m span soundproofing wall with air-passing soundproofing panel and under the cost of 250 thousand $won/m^2$ instead of the conventional 2m span panel, the installation cost will always be lowered than the conventional one in the combination of (60:40~50:50) conventional to air-passing soundproofing panel from the economic evaluation. The 20% reduction of $CO_2$ was found by changing the 50% of aluminum soundproof panel to air-passing soundproofing panel.

• 한국환경보건학회지
• /
• 제36권5호
• /
• pp.411-417
• /
• 2010

The Seoul metropolitan government has installed soundproofing walls in road tunnels to improve the tunnel environment for pedestrians. To evaluate the efficiency of these soundproofing walls, we measured noise levels and concentrations of $PM_{2.5}$ and ultrafine particles (UFP) in tunnels with or without these walls. Although noise and UFP levels were significantly lower in the tunnels with soundproofing walls, $PM_{2.5}$ levels were significantly higher: but were significantly lowered by use of a ventilation system. When $PM_{2.5}$ and noise levels were simultaneously measured in a tunnel with soundproofing wall, noise level was significantly reduced but $PM_{2.5}$ level was significantly higher. It is concluded that the soundproofing wall can protect pedestrians from noise, but not PM. Installation of a ventilation system is recommended for protection of pedestrians in tunnels with soundproofing walls.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.107-108
• /
• 2019

The interlayer noise of the apartment house is a typical problem that reduces the quality of the residential environment. Therefore, many researchers have developed soundproofing materials that blocks noise between floors. However, most development technologies do not have the noise cut-off effect felt by residents, and may also have a defect in long-term deflection. In this respect, this study developed high-performance interlayer soundproofing material that can overcome existing problems. The developed technology has the noise reduction effect experienced by the residents and it has high durability without long-term deflection. Therefore, high-performance interlayer soundproofing material is expected to contribute to reducing disputes over noise between floors of apartment residents.

• 대한환경공학회지
• /
• 제37권2호
• /
• pp.120-125
• /
• 2015

도시화의 가속화와 더불어 도심의 교통량의 증가로 도로소음피해를 최소화하기 위하여 방음벽의 설치 수요가 증가하고 있다. 설치되고 있는 여러 형태의 방음벽 중, 반사형 방음패널의 경우 불투명 방음패널과 달리 시야를 가리지 않으므로 방음시설을 요구하는 거주자들에게 인기를 얻고 있다. 하지만 반사형 방음패널의 경우, 반사음에 의한 2차 피해를 유발시켜 피해를 줄일 수 있는 방음벽 개발의 필요성이 대두되고 있다. 이에 본 연구에서는 반사형 방음패널의 전면형상 및 기하학적 형태를 변화시켜 반사음의 전달을 최소화 시킬 수 있는 형상을 연구하였다. 일반형 반사형 방음패널과 형상별 방음패널의 반사소음 저감 효과를 비교 한 결과, 곡선형 방음패널이 1.5 dB의 소음저감 효과가 있었다. 또한, 반사음의 증가 또는 감소는 형상별 설계인자에 따라 변화하는 것을 알 수 있었다. 이러한 결과는 방음벽 전면 현상에 따른 반사소음의 저감 기술의 가능성을 보여주는 결과라고 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1013-1014
• /
• 2011

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.58-60
• /
• 2008

In this paper, In this investigation we measured and evaluated effects to residential area as result of noises caused by building vibration when the turbine of hydro-electric power station runs, and establishes the best plan of soundproof for that area. Furthermore, we analyzed differences between estimated noises and actual noises and its causes before constructing the soundproofing panels so that it helps to start building the soundproofing panels and similar constructions in the future.