• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.435-438
• /
• 2005

In this paper, we implemented a system that is called sound engine in musical synthesizer and synthesized a sound of Gayageum using TMS320C6713 DSK. Sound engine consists of two parts: synthesis algorithm and processor. We improved physical modeling using digital waveguide as a synthesis algorithm and we used TMS320C6713 as a processor. The excitation signals that make timbre are stored in memory. When we input parameters, sound engine synthesizes sound of Gayageum. The experimental result shows that synthesized sounds are very similar to real sounds.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.748-751
• /
• 2015

Sound Masking System technology as by sound the same on all bands and artificially generates a constant sound shield People want to hear or recognize the people with the noise generated from the interior of the way. Prevent hearing or prevent recognition by using the technology to control the audible frequency band Continue to emit constant and uniform shielding sound audible frequency band Even the security content of speech (20 Hz~20 KHz). That interception laser eavesdropping, internal solicitations, during recording Or delay the decoding was a result of the effect of interference calculated Experience noise disturbance index is applied around the Stress Index is the average index is 10.16 was a luxury for the average index is then applied to the index 3.07 Noise is significantly lower stress level has improved noise conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.871-888
• /
• 2020

With the development of display engineering and technology, the screen and sound quality of information devices such as TVs are improving. The screen used LEDs via LCD and PDP and a large flat panel in the early CRT to create super-high resolution. The sound is improved by directly vibrating a thin and simple panel, such as an OLED. In our previous study, the exciter speaker was attached to the rear of the OLED panel to be used as the diaphragm of the speaker, and the sound quality was as good as that of the TV using the existing dynamic speaker. This method supplied the viewer with the direct sound coming from the panel, delivering clear sound, and the sound and image came from the same location, thus giving the viewer high immersion and maximizing the effect of information transfer. OLED exciter speakers, however, have a special directivity, which tends to slightly attenuate the tone at the very center of the screen. This study improves the sound quality by improving the structure of the exciter speaker and the radiated sound of the flat panel display. A 2-in-1 Exciter is made into a single core to improve the speaker's radiation pattern.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.752-760
• /
• 1993

We research ed on the noise control of a head feeding type combine harvester. It is a kind of combine harvester developed in Japan. And at present, it is used by most Japanese farmer. For a head-feeding type combine harvester it is very difficult to determine the sources of noise because it is a combination of reapers and automatic , threshers and several running parts. However we succeeded in finding out the sound sources of combine harvesters and analyzing their sound by the using sound intensity method. The sound intensity Method is a very up-to-date method to measure and analyze Sound Intensity Levels and sound directions at several measuring point sin a specified area. In this research, first a conventional sound level measurement method is used and secondly the sound intensity method. The first method shows a rather great limitation in allowed exposure duration. The second method shows pin-points the engine itself as being the main source of noise, causing sound flows a ross the operator's seat.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.81-90
• /
• 1998

Noise produced by surface transportation vehicles affects our daily lives, penetrating wherver man lives or works. In this paper, a theoretical model has been studied to describe the sound radiation by the surface vibration of in-service tires and studied about an experiment on sound radiation characteristic due to tire vibration. When a tire is analyzed, it has been modeled as a curved beams with distributed sprongs and dash-pots which represent the radial, tangential stiffnes and damping of tire, respectively. The experimental investigation for the sound radiation of a radial tire has been made. Based on the sound intensity and STSF(Spatial Transformation of Sound Field) techniques. the sound pressure and the sound radiation are measured. The comparison of numerically analyzed results with experimental results was made seperately for the tire in rotation. As a result of this study, a program for the prediction of the tire vibration sound radiation was intended to by developed which enables a designer of a tire to foresee the influence of the various design factors on the tire vibration sound radiation.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.3
• /
• pp.186-192
• /
• 2022

This study examined the utility of pine (Pinus densiflora) pollen cones as an environmentally friendly material with sound-absorbing properties. Pine pollen cone samples with widths of 0.8-1.2 cm and lengths of 3.5-4.5 cm were prepared. After filling impedance tubes to heights of 6, 8, 10, or 12 cm with the pine pollen cones, the sound absorption coefficient of the pine pollen cones was investigated. The peak sound absorption frequency of the samples with a thickness of 6 cm was reached at 1,512 Hz; however, this value shifted to 740 Hz in samples with a thickness of 12 cm. Therefore, the sound-absorbing performance of pine pollen cones at low frequencies improved as the material thickness increased. According to KS F 3503 (Korean Standards Association), the sound absorption grade of pine pollen cones ranges from 0.3 to 0.5 M, depending on the material thickness of the pine pollen cones. In conclusion, the pine pollen cones demonstrated good sound absorption properties. They, thus, may be considered an environmentally friendly sound-absorbing material.

• Educational Technology International
• /
• v.13 no.1
• /
• pp.101-144
• /
• 2012

Students mostly precede their learning without any direct support of instructor in e-learning and mobile educational environment. Many useful strategies and tools to facilitate self-regulated learning behaviors in e-learning environment have been introduced, yet, the limit has been reached by only suggesting self-regulated strategies with visual information in the most researches. Accordingly, this research is intent to propose the sound design strategies that facilitate learner's self-regulated learning behaviors in mobile learning environment. To achieve the objective of the research, two research questions are presented. First, what are the sound design strategies that facilitate the self -regulated learning behaviors in mobile learning environment?. Second, what are the results of evaluating the developed sound design strategies in terms of facilitating self-regulated learning behaviors?. To solve these research questions, the literature reviews on characteristics of mobile learning, concepts and features of self-regulated learning and sound were done to establish the sound design strategies. Through formative research method targeting instructional designers, sound design strategies were modified and supplemented. The research to validate these was performed and to verify the effect of the derived sound design strategies, the usability test aimed at instructional designer and learners was conducted. The final sound design strategies through this research process were six general design strategies and the sixteen detailed strategies. This research is meaningful because this offers the basic research on sound information design which has been lacking and help upgrade the upper limit of instructional design which mainly focused on visual information in mobile learning environment that shows information in a small screen.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.483-491
• /
• 2013

The sound-speed and density contrasts are important factors in estimating the target strength (TS) of moon jellyfish (Aurelia aurita). In this study, the sound-speed and density contrasts were measured using time-of-flight and neutral buoyancy methods, respectively. The sound-speed contrast of A. aurita was from 0.9966 to 1.0031 (mean${\pm}$SD, $0.9999{\pm}0.0017$) and no distinct differences in temperature or pulsation activity and weak were found. The density contrast was from 0.9994 to 1.0004 (mean${\pm}$SD, $1.0000{\pm}0.0002$). The density of A. aurita was substantially different but the density contrast of A. aurita was shown to be similar to that in the sampling location. The results can be used to estimate of TS of A. aurita by acoustic model.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.275-278
• /
• 2001

RASTI와 $D_{50}$이 명료도와 상관이 높은 것은 사실이지만, 음질과는 상관이 없다. RASTI는 잔향과 잡음이 적으면 값이 높아지지만, 스피커 자체에서 재생되는 음질이 찌그러지거나 명료하지 않은 음질이 재생되어도 값은 변하지 않는다. $D_{50}$ 스피커에서 재생되는 음질과 관계없이 직접음 성분이 많으면 단지 값이 높아질 뿐이다. 그런데, RASTI와 $D_{50}$이 높으면 음질도 좋을 것이 라고 생각하는 경우가 많다. 따라서 스피커의 음향 특성에 따른 RASTI, $D_{50}$의 변화 측정 및 음질 선호도 평가를 실시하고, 재생 주파수 대역에 따른 RASTI, $D_{50}$의 변화 측정 및 음질 선호도 평가를 실시하므로써, 명료도 척도와 음질과의 상관을 고찰하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.141-146
• /
• 2007

A gear whine sound due to the axle system is one of the most important sound qualities in a sport utility vehicle (SUV). In the previous research about the gear whine sound, it was known that it is difficult to evaluate the gear whine sound objectively by using the only A-weighted sound pressure level because of the masking effect. In this paper, for the objective evaluation of the axle-gear whine sound, the characteristics of the axle-gear whine sound is at the first investigated based on the synthetic sound technology and the new objective evaluation method for the axle-gear whine sound is developed by using the sound metrics, which is the psychoacoustics parameters, and the artificial neural network (ANN) used for the modeling of the correlation between objective evaluation and subjective evaluation.