• Research in Vestibular Science
• /
• v.17 no.4
• /
• pp.142-151
• /
• 2018

Objectives: Excitability o medial vestibular nucleus (MVN) in the brainstem can be affected by changes in the arterial blood pressure. Several animal studies have demonstrated that acute hypotension results in the alteration of multiunit activities and expression of cFos protein in the MVN. In the field of extracellular electrophysiological recording, tetrode technology and spike sorting algorithms can easily identify single unit activity from multiunit activities in the brain. However, detailed properties of electrophysiological changes in single unit of the MVN during acute hypotension have been unknown. Methods: Therefore, we applied tetrode techniques and electrophysiological characterization methods to know the effect of acute hypotension on single unit activities of the MVN of rats. Results: Two or 3 types of unit could be classified according to the morphology of spikes and firing properties of neurons. Acute hypotension elicited 4 types of changes in spontaneous firing of single unit in the MVN. Most of these neurons showed excitatory responses for about within 1 minute after the induction of acute hypotension and then returned to the baseline activity 10 minutes after the injection of sodium nitroprusside. There was also gradual increase in spontaneous firing in some units. In contrast small proportion of units showed rapid reduction of firing rate just after acute hypotension. Conclusions: Therefore, application of tetrode technology and spike sorting algorithms is another method for the monitoring of electrical activity of vestibular nuclear during acute hypotension.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1511-1517
• /
• 2018

Mobile Device-to-Device (D2D) caching networks can transmit multimedia data to users directly without passing through any network infrastructure by storing popular multimedia contents in advance that are popular among many mobile users at caching server devices (CSDs) in distributed manners. Thus, mobile D2D caching networks can significantly reduce backhaul traffic in wired networks and service latency time of mobile users. In this paper, we propose an efficient transmission scheme that can enhance the transmission efficiency of mobile D2D caching networks by using multiple CSDs that are caching the contents that are popular among mobile users. By sorting the multiple CSDs that are caching a content that mobile users want to receive according to their channel gains, the proposed scheme can reduce the complexity of algorithm significantly, compared to an optimal scheme based on Brute-force searching, and can also obtain much higher network transmission efficiency than the existing Blanket and Opportunistic transmission schemes.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.1
• /
• pp.1-17
• /
• 2018

The characteristics and burial ages of sand sediments on the Jiduri coast in Daechung-myeon, Ongjin-gun, Incheon were investigated. Daecheong Island is the area where the characteristics of the rocky coast and sand coast are shown. Various studies have been conducted on the Okjukdong sand dune that appears in the north of the island. However, there has been no study on the sandy sedimentary topography of the Jiduri and Moraewul area in the south. The sandy sedimentary terrain of Jiduri is divided into sandy beaches, sand dunes and sand deposits along the slope including climbing dune. Overall, the depth of sandy sediments in Jiduri is not deep. The characteristics of sandy sediments and burial ages were investigated at an elevation of about 23 m above sea level at the back of Jiduli Beach and 46 m above sea level at the ridge line between Jiduri and Moraewol. From the Jiduri coast to the hillside behind, the average grain size decreases and the sorting becomes better as it moves from the intertidal zone to the beach and the foredune. This indicates the selective sand transport by the wind and can be judged by the terrain formed under the current sedimentation environment. The average grain size at the upper part of the section of JD-1 (elevation of about 23m MSL) was $1.6918{\varphi}$ of medium sand. The sorting was $0.4584{\varphi}$, skewness was -1.0491 and kurtosis was -1.2411, respectively. Particularly, the average particle size of the crosssection issomewhat uniform, but the color of the constituent material changes from brown to black. In the case of JD-2 (about 46 m MSL), the mean grain size of the section was $1.7943{\varphi}$, the sorting was 0.4931, the skewness was -1.1163, and the kurtosis was 1.2133. On the other hand, the brown and black layers of JD-1 exhibited a burial age of $0.1{\pm}0.0ka$ and the JD-2 had a burial age of $0.7{\pm}0.0ka$.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.72-77
• /
• 2023

In many manufacturing settings, including the semiconductor industry, products are completed by producing and assembling various components. Sorting out from randomly mixed parts and classification operations takes a lot of time and labor. Recently, many efforts have been made to select and assemble correct parts from mixed parts using robots. Automating the sorting and classification of randomly mixed components is difficult since various objects and the positions and attitudes of robots and cameras in 3D space need to be known. Previously, only objects in specific positions were grasped by robots or people sorting items directly. To enable robots to pick up random objects in 3D space, bin picking technology is required. To realize bin picking technology, it is essential to understand the coordinate system information between the robot, the grasping target object, and the camera. Calibration work to understand the coordinate system information between them is necessary to grasp the object recognized by the camera. It is difficult to restore the depth value of 2D images when 3D restoration is performed, which is necessary for bin picking technology. In this paper, we propose to use depth information of RGB-D camera for Z value in rotation and movement conversion used in calibration. Proceed with camera calibration for accurate coordinate system conversion of objects in 2D images, and proceed with calibration of robot and camera. We proved the effectiveness of the proposed method through accuracy evaluations for camera calibration and calibration between robots and cameras.

• International Journal of Oral Biology
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2023

Oral squamous cell carcinoma (OSCC), which accounts for approximately 90% of oral cancers, has a high rate of local recurrence and a poor prognosis despite improvements in treatment. Exosomes released from OSCC cells promote cell proliferation and metastasis. Although it is clear that the biogenesis of exosomes is mediated by the endosomal sorting complex required for transport (ESCRT) machinery, the gene expression pattern of ESCRT, depending on the cell type, remains elusive. The exosomal release from the human OSCC cell lines, HSC-3 and HSC-4, and their corresponding gefitinib-resistant sub-cell lines, HSC-3/GR and HSC-4/GR, was assessed by western blot and flow cytometry. The levels of ESCRT machinery proteins, including Hrs, Tsg101, and Alix, and whole-cell ubiquitination were evaluated by western blot. We observed that the basal level of exosomal release was higher in HSC-3/GR and HSC-4/GR cells than in HSC-3 and HSC-4 cells, respectively. Long-term gefitinib exposure of each cell line and its corresponding gefitinib-resistant sub-cell line differentially induced the expression of the ESCRT machinery. Furthermore, whole-cell ubiquitination and autophagic flux were shown to be increased in gefitinib-treated HSC-3 and HSC-4 cells. Our data indicate that the expression patterns of the ESCRT machinery genes are differentially regulated by the characteristics of cells, such as intracellular energy metabolism. Therefore, the expression patterns of the ESCRT machinery should be considered as a key factor to improve the treatment strategy for OSCC.

• Journal of recreation and landscape
• /
• v.6 no.2
• /
• pp.63-71
• /
• 2012

As the interest in rural tourism has been increasing since the late 1990s, the research associated with rural tourism has increased, including research on the classification of rural tourism resources. The research classifying these resources has proved useful to many other studies. Although such studies have been conducted for a long time, they have expressed only experts' perspectives and been supported by statistics, without reflecting on users' opinions. Given this background, this study aims to classify rural tourism resources by focusing on the rural activities for tourists who use those tourism resources. To achieve this, each study participant proceeded to collect tourism resources by using a rural amenity resources database, and a card sorting test was conducted. Thirty-two people who had previously gone sightseeing in the rural areas were chosen as participants in the card sorting test. After the card sorting test was complete, the results were reviewed by experts. These results yielded six categories: doing nature activities, eating and cooking local dishes, putting up (overnight stays), going sightseeing/appreciating the landscape, enjoying leisure activities, and doing artistic activities. In the doing nature activities category, there were four subcategories: experiencing local resources, experiencing nature, experiencing tradition, and harvesting. This study was conducted to improve the satisfaction and understanding of the tourists who visit rural areas. Thus, the classification of rural tourism resources developed by this study will be widely used to establish the framework or contents of websites, applications, and so on, for promoting rural tourism resources and local resources.

• Resources Recycling
• /
• v.20 no.1
• /
• pp.28-36
• /
• 2011

More than 50% of refractory materials generated from high-temperature melting furnace was not carbonized and could be recycled by adopting proper separation process. In the present work, the separation of refractory materials has studied by adopting color sorting technology to promote the recycling of waste refractory. Purity of the refractory materials was obtained with at 97.2%, color temperature of sorter light source 6,500K, which gives less interference of surrounding light source. Purity and separation efficiency were improved as size is setting bigger and lower conveyer belt speed. It is revealed that optimum conditions were color temperature 6,500K, conveyer belt speed 1,000 mm/sec, particle size -20 mm, etc. To improve purity and separation efficiency on below 10mm size, the resolution of should be fixed camera and it narrow recognition range. As a result of the study, color sorting technology could be used for separation of waste refractory materials and will contribute to promote the waste recycling.

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.148-154
• /
• 2005

Since the output of retina for visual stimulus is carried by neurons of very diverse functional properties, it is not adequate to use conventional single electrode for recording the retinal action potential. For this purpose, we used newly developed multichannel recording system for monitoring the simultaneous electrical activities of many neurons in a functioning piece of retina. Retinal action potentials are recorded with an extra-cellular planar array of 60 microelectrodes. In studying the collective activity of the ganglion cell population it is essential to recognize basic functional distinctions between individual neurons. Therefore, it is necessary to detect and to classify the action potential of each ganglion cell out of mixed signal. We programmed M-files with MATLAB for this sorting process. This processing is mandatory for further analysis, e.g. poststimulus time histogram (PSTH), auto-correlogram, and cross-correlogram. We established MATLAB based protocol for waveform classification and verified that this approach was effective as an initial spike sorting method.

• Food Science of Animal Resources
• /
• v.40 no.5
• /
• pp.852-859
• /
• 2020

The muscle stem cells of domestic animals are of interest to researchers in the food and biotechnology industries for the production of cultured meat. For producing cultured meat, it is crucial for muscle stem cells to be efficiently isolated and stably maintained in vitro on a large scale. In the present study, we aimed to optimize the method for the enrichment of pig muscle stem cells using a magnetic-activated cell sorting (MACS) system. Pig muscle stem cells were collected from the biceps femoris muscles of 14 d-old pigs of three breeds [Landrace×Yorkshire×Duroc (LYD), Berkshire, and Korean native pigs] and cultured in skeletal muscle growth medium-2 (SkGM-2) supplemented with epidermal growth factor (EGF), dexamethasone, and a p38 inhibitor (SB203580). Approximately 30% of total cultured cells were nonmyogenic cells in the absence of purification in our system, as determined by immunostaining for cluster of differentiation 56 (CD56) and CD29, which are known markers of muscle stem cells. Interestingly, following MACS isolation using the CD29 antibody, the proportion of CD56⁺/CD29⁺ muscle stem cells was significantly increased (91.5±2.40%), and the proportion of CD56 single-positive nonmyogenic cells was dramatically decreased. Furthermore, we verified that this method worked well for purifying muscle stem cells in the three pig breeds. Accordingly, we found that CD29 is a valuable candidate among the various marker genes for the isolation of pig muscle stem cells and developed a simple sorting method based on a single antibody to this protein.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.783-789
• /
• 1997

This study was conducted to identify leakage of fluorescent substances out of 56 crops and to develop sorting methods of nonviable seeds of Chinese cabbage. Fluorescent substances were detected from 36 species, Chinese cabbage, radish, broccoli, cauliflower, egg plant and rape seed etc. In Chinese cabbage, the germination rate of non-sorted seeds decreased rapidly with ageing of seeds at 45$^{\circ}C$ and 100％. After Chinese cabbage seeds soaked for 4hrs and coated with cellulose, the sorting ratio of non fluorescent seeds were decreased 91.3％ to 1.7％ by increasing ageing periods from control to 8 days, while fluorescent seeds were increased drastically from 8.7％ to 98.3％. Also, incubation of water soaked dead seeds of Chinese cabbage treated with 0.5-1.0％ ninhydrin and 0.01N sodium thiosulfate for 30~60 minutes at 35$^{\circ}C$ developed purple color.