• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2207-2211
• /
• 2011

Colloidal cadmium telluride (CdTe) quantum dots (QDs) and their nanoparticles have been synthesized by one pot sonochemical reactions under multibubble sonoluminescence (MBSL) conditions, which are quite mild and facile compared to other typical high temperature solution-based methods. For a typical reaction, $CdCl_2$ and tellurium powder with hexadecylamine and trioctylphosphine/trioctylphosphineoxide (TOP/TOPO) as a dispersant were sonicated in toluene solvent at 20 KHz and a power of 220W for 5-40 min at 60 $^{\circ}C$. The sizes of CdTe particles, in a very wide size range from 2 nm-30 ${\mu}m$, were controllable by varying the sonicating and thermal heating conditions. The prepared CdTe QDs show different colors from pale yellow to dark brown and corresponding photoluminescence properties due mainly to the quantum confinement effect. The CdTe nanoparticles of about 20 nm in average were found to have band gap of 1.53 eV, which is the most optimally matched band gap to solar spectrum.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1998년도 가을 학술발표회 프로그램
• /
• pp.1-1
• /
• 1998

Advanced (Chemical) oxidation processes (AOP) differ from most conventional ones in that hydroxyl radical(OH.) is considered to be the primary oxidant. Hydroxyl radicalcan react non-selectively with a great number of organic and inorganic chemicals. The typical rate constants of true hydroxyl radical reactions are in the range of between 109 to 1012 sec-1. Many processes are possible to generate hydroxyl radical. These include physical and chemical methods and their combinations. Physical means involves the use of high energy radiation such as gamma ray, electron beam, and acoustic wave. Under an applied high energy radiation, water molecules can be decomposed to yield hydroxyl radicals or aqueous electrons. Chemical means include the use of conventional oxidants such as hydrogen peroxide and ozone, two of the most efficient oxidants in the presence of promoter or catalyst. Hydrogen peroxide in the presence of a catalyst such as divalent iron ions can readily produce hydroxyl radicals. Ozone in the presence of specific chemical species such as OH- or hydrogen peroxide, can also generate hydroxyl radicals. Finally the combination of chemical and physical means can also yield hydroxyl radicals. Hydrogen peroxide in the presence of acoustic wave or ultra violet beam can generate hydroxyl radicals. The principles for hydroxyl radical generation will be discussed. Recent case studied of AOP for water treatment and other environmental of applications will be presented. These include the treatment of contaminated soils using electro-Fenton, lechate treatment with conventional Ponton, treatment of coal for sulfur removal using sonochemical and the treatment of groundwater with enhanced sonochemical processes.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1457-1462
• /
• 2007

A simple and facile sonochemical route was described for the fabrication of diameter-controlled ZnO nanorod arrays on Si wafers. The diameter of ZnO nanorods was controlled by the concentration of zinc cations and hydroxyl anions in aqueous precursor solution. At high concentration of the precursor solution, thick ZnO nanorod arrays were formed. On the contrary, thin ZnO nanorod arrays were formed at low concentration of the precursor solution. The average diameter of ZnO nanorods varies from 40 to 200 nm. ZnO nanorod arrays with sharp tip were also fabricated by the step-by-step decrease in precursor solution concentration. The crystal structure and optical characteristics of ZnO nanorods were investigated by transmission electron microscopy, X-ray diffraction, and photoluminescence spectroscopy. Growth mechanism of ZnO nanorod arrays was also proposed.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.92-96
• /
• 2009

A new precursor [$Zr(acac)_{3}(H_{2}O)_{2}$] was synthesized by Sonochemical technique and used to deposit thin $ZrO_{2}$ film on quartz and ceramic substrate via ultrasonic aerosol assisted chemical vapour deposition (UAACVD) at 300 ${^{\circ}C}$ in oxygen environment followed by annealing of the sample for 2-3 minutes at 500 ${^{\circ}C}$ in nitrogen ambient. The molecular structure of the precursor determined by single crystal X-ray analysis revealed that the molecules are linked through intermolecular hydrogen bonds forming pseudo six and eight membered rings. DSC and TGA/FTIR techniques were used to determine thermal behavior and decomposition temperature of the precursor and nature of evolved gas products. The optical measurement of annealed $ZrO_{2}$ film with tetragonal phase shows optical energy band gap of 5.01 eV. The particle size, morphology, surface structure and composition of deposited films were investigated by XRD, SEM and EDX.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2713-2716
• /
• 2009

$CuInS_{2}$ nanoparticles were synthesized by a simple sonochemical method; First, Cu nanoparticles were prepared from $CuInS_{2}$ in methanol solution by a one pot reaction through the sonochemistry under multibubble sonoluminescence (MBSL) conditions. Second, the resulting Cu nanoparticles were treated with $InCl_3{\cdot}4H_2O$ and $CH_3CSNH_2$ (thioacetamide) at the same MBSL conditions to synthesize $In_2S_3$-coated Cu nanoparticles in methanol solution. Then, they were transformed into $CuInS_{2}$ (CIS) nanoparticles of 20 $\sim$ 40 nm size in diameter by thermal heating at 300 ${^{\circ}C}$ for 2 hr. The prepared CIS nanoparticles, of which band gap is 1.44 eV, were investigated by X-ray diffractometer, UV-Vis spectrophotometer, inductively coupled plasma spectrometer, and high resolution-transmission electron microscope.

• Elastomers and Composites
• /
• 제43권1호
• /
• pp.31-38
• /
• 2008

[ $FeCl_3$ ]를 첨가한 초음파 조건에서 4-nitroaniline, 3-nitroaniline, and 4-isopropylaniline등의 방향족 아민 화합물과 풀러렌 산화물$[C_{70}(O)_n](n\geq1)$을 반응시켰다. 이 반응은 방향족 아민 화합물을 사용한 풀러렌 산화물 쪼개짐 반응이다. MALDI-TOF-MS and UV-vis spectra를 사용하여 생성된 화합물이 아민화 풀러렌 유도체임을 확인하였다.

• 대한화학회지
• /
• 제60권1호
• /
• pp.34-38
• /
• 2016

본 연구는 zinc acetate dihydrate와 sodium hydroxide를 사용하여 ZnO nanoparticles (ZnO NPs)을 합성하였다. 실험에 사용된 방법은 초음파 방법이다. 같은 농도의 각각 zinc acetate dihydrate와 sodium hydroxide를 de-ionized water에 넣고 30분간 교반 하였다. 이 과정에서 생성된 백색의 생성물은 교반 하면서 ultrasonic processor을 사용하여 각각 60분, 120분, 180분, 240분, 360분 처리하였다. 생성물들은 원심분리 후 남은 이온들을 제거하기 위하여 에탄올을 사용하여 여러 번 세척하고, 50 ℃에서 24시간 동안 건조하였다. 합성된 물질들의 결정성과 구조적 특성을 확인하기 위하여 X-ray diffraction spectroscopy(XRD)와 Field emission scanning electron microscopy(FE-SEM)을 사용하였다. 광 촉매 효과는 오염물질 대신 Rhodamin-B를 사용하여 UV 조사하에 암실에서 실험하였다. 광 촉매 효과는 UV-vis spectrometer를 이용하여 확인하였다. XRD 결과 순수한 ZnO가 합성된 것을 확인 하였다. FE-SEM을 통하여 시간이 지남에 따라 구 형태에서 막대형태를 지나 꽃 형태로 변하는 것을 확인 할 수 있었다. 광촉매 특성 결과 꽃 형태를 가진 ZnO NPs가 광 촉매 특성이 가장 우수한 것으로 확인 되었다.

• 공업화학
• /
• 제25권1호
• /
• pp.84-89
• /
• 2014

본 연구에서는 초음파환원법을 이용하여 이산화티탄($TiO_2$) 미립자 표면에 은나노메탈이 도핑된 Ag-$TiO_2$ 나노복합체를 제조하였다. $TiO_2$ 표면에 생성되는 은나노금속은 약 1~3 nm의 사이즈분포를 나타내었고, 환원반응시 첨가되는 $AgNO_3$의 양이 증가할수록 $TiO_2$ 표면에 형성되는 은나노금속의 개수가 증가하였다. 이렇게 얻어진 일정량의 Ag-$TiO_2$ 나노복합체를 대장균(E-coli)과 함께 고체멸균배지에 도말하여 태양광모사 제논램프로부터 30 min간 $600{\sim}1800{\mu}w/cm^2$의 빛을 조사한 후 $37^{\circ}C$에서 24 h 배양한 후 생존한 콜로니의 개수를 측정하였다. 실험 결과 대조군대비 순수한 $TiO_2$를 첨가했을 때보다 Ag-$TiO_2$를 첨가 시 항균활성도가 더 높게 나타났다. 또한 Ag-$TiO_2$ 주입양이 증가할수록 콜로니의 개수가 감소하였고, 초기 30 min간 조사한 빛의 세기가 증가할수록 Ag-$TiO_2$의 항균효과가 증가하였다. 또한 은나노금속의 도핑양이 증가할수록 광촉매 효율은 감소하였지만 항균효과는 지속적으로 증가하는 경향을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.28.1-28.1
• /
• 2005

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 정기총회 및 동계학술연구발표회
• /
• pp.228-228
• /
• 2009