• 제목/요약/키워드: solving process of a problem

검색결과 1,487건 처리시간 0.035초

SWAT모형을 이용한 인공저류시설물의 하류장기유출 영향분석 기법에 관한 연구 (The Study of the Influence on Long Term Streamflow Caused by Artificial Storage Facilities Based on SWAT Modeling Process)

  • 신현석;강두기
    • 한국수자원학회논문집
    • /
    • 제39권3호
    • /
    • pp.227-240
    • /
    • 2006
  • 지표수의 수문순환 및 성분의 변동 영향 요소로는 강우, 증발, 토양수분 등의 자연적인 요소와 도시화 및 유역내 저류시설물 등의 인위적인 요소가 있다. 특히, 장기 유출 변동에 영향을 끼치는 인위적인 요소 중 저류시설을 대표적으로 들 수 있는데, 이들 영향은 단기적으로는 유출 감쇄특성의 변화, 장기적으로는 저류량 증가에 따른 건기 계절유량의 증가, 년 유황 또는 유출 특성의 변화 등의 영향을 예측할 수 있다. 우리나라와 같은 인공 저류시설이 산재한 지역에서는 자연유량 산정용 수문 순환모형을 고려하기가 곤란하며, 이들 저류시설물의 장기유출에의 메커니즘을 규명하고, 물리적 및 추계적 분석기술을 개발하며, 실 유역에의 적용을 통하여 저류시설물이 장기 유출 분석의 신뢰도에 어느 정도 영향을 주고 있는 지를 분석하는데 본 연구의 목적이 있다. 본 연구에서는 다양한 장기유출 모형 중 저류시설물 요소를 다양하게 모의할 수 있는 연속형 반분포형 모형인 SWAT모형을 이용하여 태화강 유역을 대상으로 유역내 저류시설물의 하류 장기유출에의 영향 분석을 다양한 시나리오를 통해 정량적인 영향 분석을 수행하였다.

하수처리장에서 발생하는 고농축 잉여슬러지의 열적가용화 특성에 관한 연구 (A Study on the Thermal Solubilization Characteristics of Highly Thickened Excess Sludge in Municipal Wastewater Treatment Plant)

  • 김은혁;박명수;구슬기
    • 유기물자원화
    • /
    • 제30권4호
    • /
    • pp.5-13
    • /
    • 2022
  • 현대의 환경문제는 다량의 폐기물의 발생과 무분별한 에너지의 소비로 인한 환경오염이 가속화 되고 있다는 것이다. 대표적인 에너지 생산 연료인 화석연료는 에너지를 생산하는 과정에서 연소가 이루어져 다량의 온실가스가 발생하고 최종적으로 기후변화를 야기한다. 또한 전 세계적으로 발생하는 폐기물의 양도 지속적으로 증가하고 있으며 처리하는 과정에서 환경오염이 발생하고 있다. 이와 같은 문제들을 동시에 해결하기 위한 방법 중 하나는 유기성 폐기물의 에너지화 및 감량화이다. 하수처리장에서 발생하는 하수슬러지는 해양매립이 전면 금지된 이후로 다양하게 처리되고 있으나, 그 발생량은 지속적으로 증가하는 추세이다. 하수슬러지는 유기물을 다량 함유하고 있어 혐기소화를 통하여 하수슬러지를 에너지화 하고 최종 배출되는 폐기물을 감량화 하는 것이 바람직하다. 하지만, 잉여슬러지의 경우 대부분이 하수처리에 이용되었던 미생물 덩어리로써 잉여슬러지가 혐기성소화 되기 위해서는 먼저 미생물의 세포벽이 파괴되어야 하는데 세포벽 파괴에는 많은 시간이 요구되기 때문에 혐기성 소화 과정만으로는 높은 바이오가스 생산율이나 폐기물 감량율을 달성할 수 없다. 따라서 잉여슬러지를 가용화하는 전처리 공정이 필요하며, 여러 가지 가용화 공법 중에서 열적 가용화 공정이 가장 효율적인 것으로 검증되었고, 혐기성소화 공정의 전처리 과정으로써 열적가용화 공정을 이용하여 잉여슬러지에 포함된 세포벽을 파괴한 후 전처리 된 잉여슬러지를 혐기성소화 함으로써 높은 바이오가스 생산율과 폐기물 감량율을 달성할 수 있다. 본 연구에서는 열적 가용화장치를 통하여 TS 10%의 농축 잉여슬러지를 전처리하는데 있어서 체류시간 및 운전온도 변수에 따른 가용화 특성에 대한 연구를 수행하였다. 열적 가용화장치의 체류시간에 대한 실험변수는 운전온도를 160 ℃로 고정한 상태에서 각각 30분, 60분, 90분, 120분이었다. 실험 결과로 도출된 TCOD와 SCOD를 통해 계산된 가용화율은 각각 12.11%, 20.52%, 28.62%, 31.40% 순으로 증가하였다. 또한, 운전온도에 따른 변수는 반응시간을 60분으로 고정한 상태에서 각각 120℃, 140℃, 160℃, 180℃, 200℃였으며 가용화율은 각각 7.14%, 14.52%, 20.52%, 40.72%, 57.85% 순으로 증가하였다. 이 외에 TS, VS, T-N, T-P, NH4+-N, VFAs를 분석하여 농축 잉여슬러지를 대상으로 하는 열적 가용화 특성에 대한 평가를 수행 했으며, 그 결과 TS 10%의 농축 잉여슬러지에 대한 열적 가용화를 통하여 30% 이상의 가용화율을 얻기 위해서는 운전온도를 160℃로 고정할 경우 120분의 체류시간이 필요하며, 운전시간을 60분으로 고정할 경우 170℃ 이상의 운전온도가 요구되어 진다.

'문학-미술-과학' 융합교육 프로그램의 개발 및 적용 사례 연구(II) (A Case Study(II) on Development and Application of 'Literature-Art-Science' Integrated Education Programs)

  • 최병길
    • 한국과학예술포럼
    • /
    • 제32권
    • /
    • pp.319-334
    • /
    • 2018
  • 본 연구는 '문학-미술-과학' 융합교육 프로그램의 개발과 적용을 통하여 학습자의 상상력 및 창의력의 향상을 확인하기 위한 사례 연구이다. 그 연구대상은 군산술산초등학교 1-4학년 학생 29명 중 25명이었다. 연구 시기는 2017년 9월부터 12월까지 4개월의 기간이었으며, 장소로는 군산술산초등학교 미술실을 활용했다. 10개 프로그램은 학년별로 매주 월요일부터 금요일까지 오후 1시부터 3시까지 2시간을 1회기로 총 10회기가 진행되었다. 연구자는 본 프로그램 10개 주제를 평면조형 8개와 입체조형 2개로 정하고, 여름방학 동안에 스토리텔링 작업을 완료했다. 그리고 그것들을 저:중:고(3:5:2)의 차별화된 수준으로 조정하였다. 평면조형은 '괴물 고릴라 영화 이야기'(저), '경주 최씨 정신 배우기'(중), '천연재료로 만든 내 친구 이야기'(저), '나의 꿈 해몽하기'(중), '내 스마트폰 속의 사물들을 모아보기'(중), '시집보내기 재판놀이'(중), '내가 좋아하는 동시를 그림 그리기'(고), '내가 좋아하는 동요를 그림 그리기'(고)이며, 입체조형은 '내 마음의 파랑새 찾기'(저), '내가 갖고 싶은 사물 만들기'(중)였다. 연구자는 주제별로 각기 다른 미술표현 기법을 활용했는데, 그것은 순서대로 마블링 기법, 한지공예 기법, 콤바인 페인팅 기법, 콜라주 기법, 촛불 그을림 기법, 콜라주 기법, 상상화 기법, 상상화 기법, 지점토공예 기법, 상상화기법이었다. 그리고 프로그램을 진행하면서 재료들의 생육과정이나 제조과정과 관련된 과학 지식을 전달하였다. 본 프로그램을 진행하기 이전과 진행한 이후에 토란스(Ellis Paul Torrance, 1915-2003)의 TTCT(The Torrance Tests of Creative Thinking) 도형 검사 B형과 A형으로 학습자의 융합적 사고력 및 감성적 체험을 고찰했다. 그리고 그 자료를 토대로 검사결과의 평균 차이의 유의성을 검증하기 위해서 대응 t-검증을 실시하였다. 창의력 요소별 및 평균 창의력 지수별로 분석한 결과 '유창성'에서는 유의한 차이(t=3.47, p<.01)가 나타났으며, '독창성'에서도 유의한 차이(t=3.59, p<.01)가 나타났다. 연구자가 이와 같은 작품의 제작과정, 결과물의 사진 자료 등을 정리, 분석한 결과는 다음과 같다. 첫째, 미술중심 STEAM 수업으로 진행한 본 프로그램으로부터 문학적인 내용을 미술적인 내용으로 전환시키는 학습자의 융합적 사고력에서 종합적인 문제해결 능력이 향상되었다. 둘째, 학습자는 10가지 미술표현 기법을 활용한 미술중심 STEAM 수업을 통하여 학습에 대한 다양한 상상력, 창의성, 감성적 체험을 거두었다. 셋째, 학습자는 문제해결 과정에서 친구들과의 협동심, 의사소통, 배려하는 마음이 성숙해졌다. 넷째, 10가지 미술표현 기법을 진행함에 있어서 도입과 종료 시에 각 기법과 관련된 유명 작가와 작품의 소개를 통하여 학습자의 자기만족감이 고취되었다. 이와 같이 학습자의 융합적 사고력과 감성적 체험의 영역에 대한 통계 수치는 유의성이 있는 것으로 나타나 대부분의 학습자가 본 프로그램을 통하여 자신감 있게 창의적으로 표현해내는 능력의 향상을 가져왔음을 일러준다.

The Role of Fundamentalization of Education in Improving the Future Specialists Professional Training with Usage of Multimedia Technologies

  • Palshkov, Kostiantyn;Kochubei, Olena;Tsokur, Olga;Tiahur, Vasyl;Tiahur, Liubomyra;Filimonova, Tetiana;Kuzminskyi, Anatolii
    • International Journal of Computer Science & Network Security
    • /
    • 제22권9호
    • /
    • pp.95-102
    • /
    • 2022
  • The article considers the fundamentalization of education in improving the future specialists professional training with usage of multimedia technologies by various scientists. Various points of view and approaches to defining the concepts of fundamentalization of education and multimedia technologies are identified. The concept of fundamentalization of professional training of a future specialist is based on the goals and functions of fundamentalization and - on the ways and means of achieving it, etc. Most authors agree only in their views that the fundamentalization of education is aimed at improving the quality of education and the education of the individual. Others involve the formation of a culture and worldview, increasing the creative and intellectual potential, forming the professional competence of a specialist and the potential for further education, and so on. The term multimedia refers to interactive systems that provide processing of moving and still video images, animated graphics, high-quality audio and speech. It is found out that professional training of a specialist by means of multimedia technologies includes not only the activities of the teacher and student, which form the learning process, but also the independent activity of the subject, self-development, assimilation of experience by the subject through analysis, comprehension and transformation of the field of activity in which he is included. It is revealed through the implementation of which approaches to the fundamentalization of higher professional education, it becomes possible to fully present theoretical training courses and effectively pass practical training by students, which contributes to improving the quality of training of future specialists in higher education institutions. Theoretical analysis of scientific views indicates a fairly serious attention of scientists to the problem of professional readiness of specialists and the possibility of higher educational institutions in preparing for it. At the same time, professional readiness is considered from different positions: as an active state of a person, which manifests itself in activity; as a result of activity; as goals of activity; as a quality that characterizes the attitude to solving professional problems and social situations; as a prerequisite for purposeful activity; as a form of activity of the subject; as an integral formation of personality; as a component of socio-professional culture; as a complex professionally significant neoplasm of the individual.

두꺼운 콘크리트포장의 원위치파쇄 기층화공법 (Rubblization of Thick Concrete Pavement)

  • 이승우;한승환;고석범;김지원
    • 한국도로학회논문집
    • /
    • 제8권3호
    • /
    • pp.105-114
    • /
    • 2006
  • 노후 콘크리트포장 수명을 연장하기 위한 방안으로 아스팔트 덧씌우기가 일반적이나 반사균열을 억제하기 어렵다는 단점이 있다. 이러한 반사균열을 억제하기 위하여 줄눈부 보수, 응력완화층 설치가 적용되기는 하지만 반사균열의 진전 속도를 늦추는 제한적인 성공을 보여 왔다. 콘크리트포장 슬래브를 원위치에서 파쇄하여 기층재료로 활용하고 그 위에 덧씌우기 포장을 건설하는 원위치파쇄기층화 공법은 기존 덧씌우기 보강공법이 갖고 있는 반사균열 문제를 완벽하게 해결할 수 있는 장점을 가지고 있다. 본 공법을 적용할 경우 파쇄된 노후 콘크리트 포장의 상부층은 40mm-70mm로 파쇄되나 하부층은 100mm 이상 되는 경우가 일반적이다. 그러나 콘크리트 두께가 30cm 이상 되는 경우에는 전체두께를 적정 Size로 파쇄골재화하는 것이 어렵다. 따라서 파쇄된 노후 콘크리트 포장층이 반사균열을 유발시키지 않고 도로기층으로서의 역할을 확보할 수 있는 적정 파쇄 깊이를 파악하기 위하여 파쇄골재깊이를 0cm, 10cm, 20cm로 변화시켜가며 simulation test를 수행한 결과, 적정 파쇄 깊이 10cm를 도출하였다(Lee, 2006). 또한 소형파쇄장비를 제작하여 실제 도로와 동일한 기준으로 시험 포장을 건설하여 파쇄헤드 형상, 파쇄에너지, 유효파쇄 면적 등을 달리하여 두꺼운 콘크리트포장형식에 적합한 파쇄방법을 개발하였으며 Prototype의 파쇄장비를 개발하여 실제 공용중인 고속도로에서 시험시공 및 모니터링을 실시하여 제안된 파쇄방법의 적정성을 검토하였다.

  • PDF

항만관련문제의 시스템적 고찰 부산항 물류시스템의 실태분석 (A Systematic Approach to Port related Problems An Analysis on the Actual Condition of physical Distribution System of Pusan port)

  • 이철영;문성혁
    • 한국항만학회지
    • /
    • 제2권1호
    • /
    • pp.7-28
    • /
    • 1988
  • From the viewpoint of physical distribution, the port transport process can be regarded as a system which consists of various subsystems such as navigational aids, quay handling, transfer, storage, information If management, and co-ordination with inland transport. The handling productivity of this system is determined by the production level of the least productive subsystem. So, a productivity analysis on the flow of cargoes through each subsystem should be made in order to achieve efficient port operation. The purpose of this paper is to analyze the productivity of each subsystem in Pusan port, and to bring forward problems and finally to draw up plans for their betterment. Analyzed results on the productivity of each subsystem are as follows, i) It is known that the number of tugs with low HP should be increased by a few, the number of tugs with medium HP is appropriate, and the number of tugs with high HP is in excess of that necessary. ii ) In the case of container cargoes, it is found that the transfer and storage systems in BCTOC have the lowest handling capability, with a rate of $115\%$, leading to bottle-necks in the port transport system, while the handling rate of the storage and quay handling systems in general piers is in excess of the inherent capability. iii) In the case of the principal seaborne cargoes passing through general piers, there is found to be a remarkable bottle-neck in the storage system. In the light of these findings, both the extension of storage capability and the extension of handling productivity are urgently required to meet the needs of port users. Therefore, iv) As a short-term plan, it is proposed that many measures such as the reduction of free time, the efficient application of ODCY, etc must be brought in and v) In the long-trun, even though the handling capability will accommodate an additional 960,000 TEU in 1991, the scheduled completion date of the third development plan of Pusan port, insufficiency of handling facilities in the container terminal is still expected and concrete countermeasures will ultimately have to be taken for the port's harmonious operation. In particular, the problem of co-ordination with inland transport and urban traffic should be seriously examined together in the establishment of the Pusan port development. As a method of solving this, vi) It is suggested that Pusan port (North port) should be converted into an exclusive container ternimal and overall distribution systems to the other ports for treating general cargoes must be established. vii) And finally, it is also proposed that the arrival time (cut-off time) of influx cargoes for exports such as general merchandise and steel product should be limited, with a view to securing cargoes suitable for the operational capability of BCTOC.

  • PDF

지식 간 내용적 연관성을 표현하는 키워드 기반 네트워크형 지식지도 개발 (Keyword-based networked knowledge map expressing content relevance between knowledge)

  • 유기동
    • 지능정보연구
    • /
    • 제24권3호
    • /
    • pp.119-134
    • /
    • 2018
  • 저장 및 관리하는 지식의 분류체계로서의 의미를 갖는 지식지도는, 문제해결을 위하여 지식을 조회 및 선택하는 사용자의 활동을 지원하고 보완할 수 있는 구조를 갖추어야 한다. 계층형 구조를 갖는 기존의 지식지도는, 관리하는 지식을 체계적으로 정리하는 데에는 이점이 있으나, 지식 사용자가 갖는 인지 및 활용의 논리를 반영하지 못할 뿐만 아니라 지식을 조회 및 추출하는 사용자의 활동을 지원하지 못한다. 본 연구는, 내용적 관련성을 갖는 연관지식을 연쇄적으로 조회 및 추출하는 사용자의 지식활용 패턴을 반영하는, 키워드 기반 네트워크형 지식지도를 구축하는 방법론을 제시한다. 즉, 지식 간 내용적 연관성을 파악하기 위하여 키워드를 추출하고 공통된 키워드를 갖는 지식 간 링크를 해당 키워드를 이용하여 정의한다. 키워드는 해당 지식의 내용을 대변하므로, 키워드를 기반으로 정의된 링크는 내용적으로 관련성이 있는 지식 간에 형성되며, 이를 종합하면 내용적 연관성을 지식 간의 네트워크, 즉 네트워크형 지식지도가 완성된다. 제시된 방법론의 적용 타당성을 검토하기 위해 50개의 연구논문을 이용하여 이들 간의 내용적 연관성을 표현하는 네트워크형 지식지도를 구현하였으며, 검토 결과 만족할만한 수준의 정밀도와 재현율을 보였다.

직장생활에 대한 새로운 인식 (Quality of Working Life)

  • 김영환
    • 산업경영시스템학회지
    • /
    • 제4권4호
    • /
    • pp.43-61
    • /
    • 1981
  • Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.

  • PDF

기계설계분야 중견 엔지니어의 일과 학습에 관한 내러티브 연구 - 엔지니어의 직무관련 학습의 맥락과 공학교육에 대한 시사점 찾기 (A narrative research on the job and the job-related learning of a mechanical engineer - an exemplary study on the characteristic of job-related learning of engineer in work place and it's implication on engineering education)

  • 임세영
    • 대한공업교육학회지
    • /
    • 제38권2호
    • /
    • pp.1-26
    • /
    • 2013
  • 이 연구는 기계설계 분야의 중견엔지니어 한 사람을 중심으로 그가 수행하는 구체적인 과업은 무엇이며 그와 관련하여 이루어지는 학습은 무엇인지, 일터에서 이루어지는 직무관련 학습의 맥락은 무엇인지 내러티브 연구방법에 의해 탐구하였으며, 이것이 공학교육에 주는 시사점을 논의하였다. 연구결과 연구참여자는 취업 후 수입대체를 위한 초창기 반도체 검사장비 개발을 위해 독립적으로 개발할 장비에 관한 기초지식을 습득하고 장비의 개념설계를 하였으며, 볼 타입 반도체 검사장비개발 동료들과 함께 장비의 구체설계를 하였고, 근무하던 회사의 폐업 후 잔류 엔지니어들과 함께 창업, 인터뷰 당시 이 기업의 경영자로 일하였다. 그가 엔지니어로서 수행한 주요 실무는 공학적 문제해결이었으며, 비형식적 학습의 과정이었다. 그는 실무수행 과정에서 프로젝트 관리, 자기주도적 과업수행, 기능분석, 추론과 검증, 긴밀한 협동, 대화와 토론, 시행착오, 암묵적 경험지식의 체계화, 총체적 사고, 환경변화의 지각과 기술수요 예측, 인간관계와 업무의 조화, 리더십 등을 경험하였다. 이를 바탕으로 공학교육이 프로젝트 학습, 자기주도적 학습, 대화와 토론 능력 교육을 위한 협동학습, 성찰학습, 실무적 경험을 이론화하는 학습, 인간관계와 리더십 교육 등을 강화해야 한다는 시사점을 얻었다.

지역사회협력 기반 문헌정보학 캡스톤 교과목 개발과 운영에 관한 연구 - 휴먼라이브러리 프로젝트 수행을 통한 21세기 학습 기술 강화를 중심으로 - (A Study on the Implementation of a Community-based LIS Capstone Course: Developing the 21st Century Skills of Preservice Librarians through Human Library Projects)

  • 이지수
    • 한국문헌정보학회지
    • /
    • 제57권2호
    • /
    • pp.379-408
    • /
    • 2023
  • 본 연구는 C대학교 문헌정보학과에 기개설된 <지역문화정보론> 교과목을 프로젝트 기반 학습법을 활용한 캡스톤디자인 교과목으로 구성하여 운영한 사례에 관한 연구이다. 해당 교과목에서는 지역사회 청소년 특화기관과 연계하여 지역 고등학생들을 대상으로 디지털리터러시 교육을 수행하고 휴먼라이브러리 콘텐츠를 제작하는 프로젝트를 기획하여 진행하였다. 프로젝트에 참여한 수강생 5명과 협력기관 업무담당자 3명과의 반구조화된 심층면담을 수행하여, 지역사회와 연계하여 프로젝트 기반 학습법을 적용한 캡스톤디자인 교과목 개발과 운영의 특징 및 성과를 보고하고 개선점을 제안하였다. 또한, 21세기 학습 프레임워크(P21)를 사용하여 수강생들과의 심층면담 내용을 분석하여, 프로젝트 참여를 통해 수강생들은 P21의 3가지 기술 영역 전반의 11가지 학습 기술-자기주도, 프로젝트관리, 다양한 팀과의 협력, 유연함, 책임감, 리더십(삶과 경력 기술 영역)과 의사소통과 협업, 문제해결력, 창의력, 비판적 사고(학습과 혁신 기술 영역), 그리고 미디어결과물생성 기술(정보미디어테크놀로지 기술 영역)-을 강화했음을 확인했다. 본 사례연구는 지역사회협력에 기반한 문헌정보학 캡스톤디자인 교과목의 개발과 운영에 참고할 수 있는 방향성을 제시하고, 프로젝트 기반 학습법의 적용을 통한 커리큘럼 개발에 관심있는 교수자 및 연구자에게 도움이 되고자 하였다.