• 대한의생명과학회지
• /
• 제23권4호
• /
• pp.388-394
• /
• 2017

Recently, coffee is the most popular beverage for modern people. A great number of substances are found in coffee beans and have been studied for many years such as aliphatic and aromatic compounds. However, studies on the physiological activity of coffee extracts are insufficient. This study was performed to determine the contents of caffeine and chlorogenic acid in coffee extracts according to the solvent and to investigate the physiological activity of coffee extracts. Coffee extracts were extracted by ultrasonication method with various types of solvents including distilled water, ethanol, and other organic solvents under $50^{\circ}C$ and $80^{\circ}C$. The contents of caffeine and chlorogenic acid in coffee extracts were determined by Liquid Chromatography-Mass Spectrometry (LC-MS). Also, cytotoxic and antioxidative effects of coffee extracts were evaluated with MTT and DPPH assays to analyze the physiological activity. As a result, it was confirmed that caffeine and chlorogenic acid contents were extracted in distilled water with the highest rate. Antioxidative activity was observed below 10-fold dilute of coffee extracts, however cytotoxicity was not observed. In conclusion, distilled water was the best solvent for extracting caffeine and chlorogenic acids from coffee bean with ultrasonication and these coffee extracts are less cytotoxic in human skin cell lines and have antioxidant effect.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.207-216
• /
• 2009

Friction tests were carried out in order to investigate the effects of temperature on the friction and wear behaviors between a PMMA film and a fused silica lens using a microtribometer. The friction forces on the PMMA film were measured under atmospheric condition as the temperature of the film was increased from 300 K to 443 K. The contact area between the film and the lens was observed. The tribological characteristics of the film were significantly changed as the temperature increased. The changes were discussed with the change of the film state from glassy to viscous flow. In addition, the results showed that the friction behavior can be varied with the thermal history of the PMMA film. Residual solvent in the PMMA film could emerge to the PMMA surface due to an additional heating and the solvent on the film surface decreased the friction force.

• 대한화학회지
• /
• 제17권6호
• /
• pp.411-415
• /
• 1973

Cyanide ion과 triphenylmethane dye와의 반응은 cetyltrimethyl ammonium bromide(CTABr)의 cationic micelle에 의하여 현저히 반응속도가 빨라지며 sodium lauryl sulfate(NaLS)의 anionic micelle에 의하여 반응속도가 늦어진다. 또한 CTABr존재하의 반응은 inorganic anion에 의하여 inhibition, 되며 NaLS존재하의 반응은 inorganic cation중의 몇가지, 특히 $Zn^{++},\;Cd^{++}$등에 의하여 현저하게 반응이 빨라지는 salt effect를 나타낸다. 물과 잘 혼합되는 몇가지 유기용매의 micelle catalysis에 대한 영향은 대체로 수용액 일때보다 작게 나타나서 반응속도가 늦어지거나 malachite green과의 반응에서 methanol은 수용액일때보다 반응속도가 빨라지는 특이한 solvent effect를 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제17권6호
• /
• pp.520-524
• /
• 1996

Solvolyses of phenyl chloroformate in water, D2O, CH3OD, 50% D2O-CH3OD, and in aqueous binary mixtures of acetone, ethanol and methanol are investigated at 25.0 ℃. Product selectivities are reported at 25 ℃ for a wide range of ethanol-water and methanol-water solvent compositions. The Grunwald-Winstein plots of first-order rate constants for phenyl chloroformate with YCl (based on 2-adamantyl chloride) show marked dispersions into three separate lines for the three aqueous mixtures with a small m value (m< 0.2) and a rate maximum for aqueous alcohol solvents. Third-order rate constants, kww, kaw, kwa and kaa were calculated from the observed kww and kaa values together with kaw and kwa calculated from the intercept and slope of the plot of 1/S vs. [alcohol]/[water]. The calculated rate constants, kcalc and mol % of ester agree satisfactorily with those of the observed rate constants, kobs and mol % of ester, supporting the stoichiometric solvation effect analysis. The kinetic solvent isotope effects determined in water and methanol are consistent with the proposed mechanism of the general base catalyzed and/or carbonyl addition for phenyl chloroformate solvolyses based on mass law and stoichiometric solvation effect studies.

• Archives of Pharmacal Research
• /
• 제15권2호
• /
• pp.176-183
• /
• 1992

The stabilizing effects of $\alpha$-$\beta$-$\gamma$- and dimethyl-$\beta$-cyclodextrins $(\alpha$-, $\beta$-, $\gamma$- and DM-$\beta-$-CyDs) on the degradation of hydrocortisone 17-butyrate (HC-17B) in aqueous solution was investigated. Hc-17B underwent a facile hydroxide ion-catalyzed rearrangement to the less active 21-butyrate ester by the apparent first-order kinetics, and maximum stability of HC-17B was obtained at around pH 4.0. The stability of HC-17B was increased by inclusion complexation with $\alpha$-, $\gamma$- and DM-$\beta$-CyD in the pH range of 2.0-8.0 examined, whereas $\beta$-CyD accelerated the degradation of HC-17B at the pH higher than 5.0. The effects of ionic strength, solvent, temperature and CyD concentration were also investigated. Stability constants and apparent degradation rate constants of HC-17B-$\gamma$-CyD and HC-17B-DM-$\beta$-CyD complexes were determined kinetically on the basis of 1:1 complexation. The results suggested that the inclusion complexation with $\gamma$-CyD or DM-$\beta$-CyD was most useful means to enhance the stability of the steroid.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.78-81
• /
• 2012

$Y_2O_3$ nanomaterials have been widely used in transparent ceramics and luminescent devices. Recently, many studies have focused on controlling the size and morphology of $Y_2O_3$ in order to obtain better material performance. $Y_2O_3$ powders were prepared under a modified solvothermal condition involving precipitation from metal nitrates with aqueous ammonium hydroxide. The powders were obtained at temperatures at $250^{\circ}C$ after a 6h process. The properties of the $Y_2O_3$ powders were studied as a function of the solvent ratio. The synthesis of $Y_2O_3$ crystalline particles is possible under a modified solvothermal condition in a water/ethylene glycol solution. Solvothermal processing condition parameters including the pH, reaction temperature and solvent ratio, have significant effects on the formation, phase component, morphology and particle size of yttria powders. Ethylene glycol is a versatile, widely used, inexpensive, and safe capping organic molecule for uniform nanoparticles besides as a solvent. The characterization of the synthesized Y2O3 powders were studied by XRD, SEM (FE-SEM) and TG/DSC. An X-ray diffraction analysis of the synthesized powders indicated the formation of the $Y_2O_3$ cubic structure upon calcination. The average crystalline sizes and distribution of the synthesized $Y_2O_3$ powders was less than 2 um and broad, respectively. The synthesized particles were spherical and hexagonal in shape. The morphology of the synthesized powders changed with the water and ethylene glycol ratio. The average size and shape of the synthesized particles could be controlled by adjusting the solvent ratio.

• Bulletin of the Korean Chemical Society
• /
• 제29권6호
• /
• pp.1149-1156
• /
• 2008

The conformational study on neutral and zwitterionic L-alanines (N-Ala and Z-Ala, respectively) and the transition state (TS) for their interconversion is carried out using ab initio HF and density functional B3LYP methods with the self-consistent reaction field method in the gas phase and in solution. At both the HF and B3LYP levels of theory, the local minimum N1 for N-Ala is found to be most preferred in the gas phase and a weak asymmetric bifurcated hydrogen bond between the amino hydrogens and the carbonyl oxygen appears to play a role in stabilizing this conformation. The local minima N2a and N2b are found to be the second preferred conformations, which seem to be stabilized by a hydrogen bond between the amino nitrogen and the carboxylic hydrogen. The relative stability of the local minimum N2b is remarkably increased in solution than that in the gas phase. The local minimum N2b becomes more stable than the local minimum N2a in most of the solution. On the whole the relative free energies of Z-Ala and TS become more lowered, as the solvent polarity increases. N-Ala prevails over Z-Ala in aprotic solutions but Z-Ala is dominantly populated in ethanol and water. In aprotic solutions, the population of Z-Ala increases somewhat with the increase of solvent polarity. The barrier to Z-Ala-to-N-Ala interconversion increases on the whole with the increase of solvent polarity, which is caused by the increase of stability for Z-Ala.

• 자원리싸이클링
• /
• 제24권5호
• /
• pp.56-62
• /
• 2015

폐 초내열합금으로부터 침출된 염산용액에서 레늄을 회수하기 위하여 용매추출법을 이용한 레늄의 분리연구를 수행하였다. 용매추출공정을 통해 수상은 레늄이 용해된 합성용액을 사용하고 추출제의 종류 및 농도, 수상의 pH, HCl의 농도, 불순물의 영향을 조사하는 연구를 진행하였다. 레늄의 원료로 Ammonium perrhenate ((APR), Aldrich, $NH_4ReO_4$)을 사용하였고, 수상에 존재하는 레늄을 유기상으로 추출하기 위해 추출제는 음이온추출제인 Alamine304-1, 양이온추출제인 Cyanex272과 $D_2EHPA$를 사용하였다. 음이온추출제인 Alamine304-1 사용시 레늄의 추출율이 99% 이상 나타났으며 수상의 pH 는 0-2 사이에서 99% 추출되었다. Alamine304-1의 농도를 0.1, 0.5, 1 및 2%으로 조절하여 추출실험한 결과, 농도가 증가함에 따라 추출율이 증가한다. 레늄용액에 알루미늄, 코발트, 바나듐을 첨가하여 용매추출법에 의해 분리 실험한 결과 레늄은 99.8 %으로 추출되었으나 기타 금속들은 거의 추출되지 않았다.

• 약학회지
• /
• 제44권6호
• /
• pp.511-520
• /
• 2000

Various bupivacaine-loaded microspheres were prepared from poly (d,l-lactide) (PLA) or poly (d,l-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. PLA and PLGA microspheres were prepared by w/o/w and w/o/o multiple emulsion solvent evaporation, respectively. The effects of process conditions such as emulsification speed, emulsifier type, emulsifier concentration and internal/external phase ratio on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency was higher in the microspheres prepared by w/o/o multiple emulsion than that by w/o/w multiple emulsion method, because the solubility of bupivacaine HCI was decreased in oil phase compared with water phase. The prepared microspheres had an average diameter between 1 and $2\;{\mu}M$ in all conditions of two methods. In morphology studies the PLA microspheres showed an irregular shape and smooth surface, but PLGA microspheres had a spherical shape and smooth surface. The release pattern of the drug from microspheres was evaluated on the basis of the burst effect and the extent of the release after 24h. The in vitro release of bupivacaine HCl from microspheres showed a large initial burst release and $60{\sim}80%$ release within one day in all conditions of two methods. The extents of the burst release against PLA and PLGA microspheres were $30{\sim}50%$ and $50{\sim}80%$ within 20min, respectively. This burst release seems to be due to the smaller size of microspheres and the solubility of drug in water.