• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.28-31
• /
• 2009

We describe the synthesis and characterization of silicon nanoparticles prepared by the soluton reduction of SiCl4. These reactions produce Si nanoparticles with surfaces that are covalently terminated. The resultant organic derivatized Si nanoparticles as well as a probable distribution of Water-soluble Si nanoparticles are observed and characterized by photoluminescence(PL) spectroscopy. This work focuses originally on the organic- and water-soluble silicon nanoparticles in terms of the photoluminescence. Further this work displays probably the first layout of hydrogen terminated Si nanoparticles synthesized in solution at room temperature.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.93-98
• /
• 2020

Effective control of the heat generated from electronics and semiconductor devices requires a high thermal conductivity and a low thermal expansion coefficient appropriate for devices or modules. A method of reducing the thermal expansion coefficient of Cu has been suggested wherein a ceramic filler having a low thermal expansion coefficient is applied to Cu, which has high thermal conductivity. In this study, using pressureless sintering rather than costly pressure sintering, a polymer solution synthesis method was used to make nano-sized Cu powder for application to Cu matrix with an AlN filler. Due to the low sinterability, the sintered Cu prepared from commercial Cu powder included large pores inside the sintered bodies. A sintered Cu body with Zn, as a liquid phase sintering agent, was prepared by the polymer solution synthesis method for exclusion of pores, which affect thermal conductivity and thermal expansion. The pressureless sintered Cu bodies including Zn showed higher thermal conductivity (180 W/m·K) and lower thermal expansion coefficient (15.8×10^-6/℃) than did the monolithic synthesized Cu sintered body.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2256-2260
• /
• 2013

A new quinoline-based acylhydrazone (1) has been synthesized and applied as a fluorescent probe. Probe 1 exhibits high selectivity and sensitivity to $Cu^{2+}$ with fluorescence "ON-OFF" behavior in HEPES buffered (1‰ DMSO, HEPES 20 mM, pH = 7.4) solution. The on-site generated 1-$Cu^{2+}$ complex displays excellent selectivity to sulfide ions with fluorescence "OFF-ON" performance through copper displacement approach.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.38-43
• /
• 2009

수산화알루미늄을 원료물질로 하여 알루미늄 유기화합물인 aluminum oxalate 합성실험을 수행하였다. 이를 위해 국산 99.7% 순도의 수산화알루미늄을 옥살산으로 용해하는 방법으로 알루미늄 수용액을 제조하였으며, 실험결과 옥살산 농도 1.0 mole/l, 반응온도 $90^{\circ}C$에서 16시간 용해시 거의 100%에 가까운 용해율을 얻을 수 있었다. 알루미늄 수용액으로부터 aluminum oxalate를 합성하기 위해서는 ethanol/Al solution 혼합비율을 2.0이상으로 유지하여야 하는 것으로 나타났다. 또한, 90% 이상의 회수율을 얻기 위해서는 혼합액의 pH를 8.2이상으로 조절하여야 하는 것으로 나타났다. 합성반응을 통해 얻은 aluminum oxalate의 화학분석결과 $NH_4$ 14.5%, Al 7.18% 및 C 17.4%이었으며, 이의 화학식은 $(NH_4)_3Al(C_2O_4)_3$ $3H_2O$임을 확인할 수 있었다.

• 자원리싸이클링
• /
• 제20권2호
• /
• pp.54-59
• /
• 2011

염화알루미늄 수용액을 원료로 하여 알루미늄 유기화합물인 aluminum tartrate 합성실험을 수행하였다. 합성시 ethanol/Al solution 혼합비율 및 pH가 합성율에 미치는 영향을 조사하였으며, 합성된 aluminum tartrate는 화학분석, X-선 회절분석, 입도분석 및 SEM 분석을 통하여 시료특성을 평가하였다. 실험결과, ethanol/Al solution 혼합비율 3.0에서 pH 3.0 이상인 경우 aluminum tartrate 합성율은 97% 이상으로 나타났다. 합성반응을 통해 얻은 aluminum tartrate의 각 화학분석결과 $NH_4$ 9.10%, Al 4.83% 및 C 25.8%이었으며, 이의 화학식은 $(NH_4)_3Al(C_4H_4O_6)_3$임을 확인할 수 있었다.

• 약학회지
• /
• 제44권6호
• /
• pp.545-551
• /
• 2000

Magnesium trisilicate was prepared by reacting Magnesium sulfate solution with Sodium silicate solution in this study. The optimum synthesis conditions base on the yield of the product were established by applying Box-Wilson experimental design. It was found that the optimum synthesis conditions of Magnesium trisilicate were as follows; Reacting temperature : $57{\sim}90^{\circ}C$, Concentration of reactant solution : $19.1{\sim}20.0%$, Molar concentration ratio of two reactants : [Sod.silicate]/[Mg.sulfate] : $1.47{\sim}1.80$, Temperature of washing water : $45{\sim}48^{\circ}C$, Drying temperature : $65{\sim}82^{\circ}C$. The antacidic capacity of the five Magnesium trisilicate samples which shows the maximum antacidic efficacy was tested by pharmacopeia acid consuming capacity test. The five Magnesium trisilicate samples were identified by chemical analysis.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.88-98
• /
• 1998

In many automatization applications, a rigid body is required to go forward and backward repeatedly through a set of given position/orientations precisely while a crank is rotated. Such a motion can be generated by 6 bar mechanism adding a dyad to a 4 bar mechanism. If this is the case for 3 position synthesis of the 4 bar mechanism, the feasible solution area for designing the 4 bar mechanism will be limited over the general solution area. This paper proposes a procedure to synthesize 4 bar mechanism to be used to generate the required motion. It is found that the only input crank of the 4 bar mechanism should be limited to satisfy the condition. And the feasible design area for the circle point/ center point of the input crank is identified so that design of the undesired mechanism could be avoided. The method is tested and the results are shown.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.731-737
• /
• 1997

TixZr1-xC(0$0^{\circ}C$, 5.1 mm/sec respectively. The relative density, three point flexural strength, and the hardness of composites, which was sintered at 190$0^{\circ}C$ for 60 min by using hot-pressing under a pressure of 30 MPa, were 99%, 525 MPa and 24 GPa respectively.

• Environmental Engineering Research
• /
• 제10권4호
• /
• pp.165-173
• /
• 2005

Nano-sized iron particles were synthesized by reduction of $Fe^{3+}$ in aqueous solution under two reaction conditions, aerobic and anaerobic, and the reactivity of iron was tested by reaction with trichloroethene (TCE) using a batch system. Results showed that iron produced under anoxic condition for both synthesis and drying steps gave rise to iron with higher reduction reactivity, indicating the presence of oxygen is not favorable for production of nano-sized iron deemed to accomplish reactivity enhancement from particle sized reduction. Nano-sized iron sample obtained from the anoxic synthesis condition was further characterized using various instrumental measurements to identity particle morphology, composition, surface area, and particle size distribution. The scanning electron microscopic (SEM) image showed that synthesized particles were uniform, spherical particles (< 100 nm), and aggregated into various chain structures. The effects of other synthesis conditions such as solution pH, initial $Fe^{3+}$ concentration, and reductant injection rate on the reactivity of nano-sized iron, along with standardization of the synthesis protocol, are presented in the companion paper.

• 항공우주기술
• /
• 제4권1호
• /
• pp.25-30
• /
• 2005

4절 링크장치는 인입식 착륙장치를 가장 간단하게 기구학적으로 모사한 모델이다. 4절 링크의 설계 및 해석은 상용프로그램에서 제공하는 기구학 해석 및 시뮬레이션 기능을 이용하는 것이 일반인 방법이다. 그러나 해석적 방법은 많은 반복시도를 하여야 유용한 해를 구할 수 있다. 이러한 단점을 극복하기 위하여 합성설계(Synthesis) 기법을 사용한다. 합성설계기법은 해석적 방법보다 반복시도를 많이 줄여 주지만 최적해를 보장할 수는 없다. 최적의 해를 얻기 위해 기존의 합성설계방법에 최적화 기법을 적용하여 해를 찾을 수 있다. 이 연구에서는 최적화 기법을 적용할 때 필요한 해영역의 특성을 분석하였다.