• Carbon letters
• /
• 제14권4호
• /
• pp.251-254
• /
• 2013

In this study, poly(amic acid) was prepared via a polycondensation reaction of 3,3'-dihydroxybenzidine and pyromellitic dianhydride in an N-methyl-2-pyrrolidone solution; reduced graphene oxide/polybenzoxazole (r-GO/PBO) composite films, which significantly increased the electrical conductivity, were successfully fabricated. GO was prepared from graphite using Brodie's method. The GO was used as nanofillers for the preparation of r-GO/PBO composites through an in situ polymerization. The addition of 50 wt% GO led to a significant increase in the electrical conductivity of the composite films by more than sixteen orders of magnitude compared with that of pure PBO films as a result of the electrical percolation networks in the r-GO during the thermal treatment at various temperatures within the films.

• 공업화학
• /
• 제17권5호
• /
• pp.561-564
• /
• 2006

$SnO_{2}$가 도핑된 아나타제형의 $TiO_{2}$ 분말을 tin (IV) bis (acetylacetonate) dichloride와 titanium diisopropoxide bis (acetyl- acetonate)를 출발물질로, polyethylene glycol (PEG)을 첨가하여 합성하였다. 반응과정에 대한 구조변화를 FT-IR로 추적하였고, 입자의 모양과 형태 및 결정의 구조는 FE-SEM과 XRD 분석기로 관찰하였다. 합성된 분말의 광촉매 효과는 환경오염물질로 indigo carmine (IC)을 선택하여 UV-visible 스펙트라로 관찰하였다.

• 폴리머
• /
• 제27권1호
• /
• pp.17-25
• /
• 2003

원자 이동 라디칼 중합 (ATRP)을 이용하여 CuBr/N,N,N',N",N"-pentamethyldiethylene triamine 촉매 시스템하에서 용액중합으로 polystyrene 거대 개시제와 polystyrene-b-t-poly(butyl acrylate) (PS-b-P(tBA)) 블록 공중합체를 합성한 후, 가수분해를 통해 polystrene-b-poly(acrylic acid) 양친매성 블록 공중합체를 얻었다. 또한, 이를 중화하여 블록 이오노머를 제조하였다. 합청된 PS-b-P(tBA) 블록 공중합체는 분자량이 5000-10000 정도로 조절되었고, 분자량 분포도 1.2 이하로 비교적 좁게 나타났다. 공중합체는 $^1$H-NMR, FT-IR로 분석하였으며, DSC로 열적 성질을 측정한 결과, styrene의 비율이 더 많기 때문에 100 $^{\circ}C$ 근처에서 T$_{g}$가 나타났으며, TEM을 통해 이온 그룹의 상분리를 확인하였다.분리를 확인하였다.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.103-107
• /
• 2008

Carbon nanodots were prepared by the pyrolysis of a triblock copolymer. The triblock copolymer, poly(methyl methacrylate)-b-polystyrene-b-poly(methyl methacrylate) was synthesized by atom transfer radical polymerization using an initiator containing a diacetylene group. A polymer thin film on a mica substrate was prepared by spin-casting at 2,000 rpm from a 0.5 wt% toluene solution of the triblock copolymer. After drying, the cast film was vacuum-annealed for 48 h at $160^{\circ}C$. The annealed film formed a spherical morphology of polystyrene domains with a diameter of approximately 30 nm. The film was exposed to UV irradiation to induce a cross-linking reaction between diacetylene groups. In the subsequent pyrolysis at $800^{\circ}C$, the cross-linked polystyrene spheres were carbonized and the poly(methyl methacrylate) matrix was eliminated, resulting in carbon nanodots deposited on a substrate with a diameter of approximately 5 mn.

• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.451-460
• /
• 2019

Thin film composite membranes incorporated with nano-sized hydrophilic zeolite -A were successfully prepared via interfacial polymerization (IP) on porous blend PES/PAN support for water desalination. The thin film nanocomposite membranes were characterized by SEM, contact angle and performance test with 7000 ppm NaCl solution at 7bar. The results showed that the optimum zeolite loading amount was determined to be 0.1wt% with permeate flux 29LMH.NaCl rejection was improved from 69% to 92% compared to the pristine polyamide membrane where the modified PA surface was more selective than that of the pristine PA. In addition, there was no significant change in the permeate flux of the thin film nanocomposite membrane compared with that of the pristine PA in spite of the formation of the dense polyamide layer. The stability of the polyamide layer was investigated for 15 days and the optimized membrane presented the highest durability and stability.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.399-407
• /
• 2019

This research is carried out to analyze the effects of Styrene and PVP on the properties of silicone hydrogel lenses. Styrene group and PVP(Polyvinylpyrrolidone) are used as additives for a basic combination containing silicone monomer, TSMA(trimethylsilyl methacrylate) and DMA(n,n-dimethylacrylamide) added to the mix at ratios of 1~10 %. Silicone hydrogel lens is produced by cast-mold method. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before its optical and physical characteristics are measured. Measurement of the physical characteristics of the produced material shows that the refractive index is 1.3682~1.4321, water content 77.11~45.73 %, visible light transmittance 95.14~88.20 %, and tensile strength 0.0652~0.3113 kgf. The results show a decrease of refractive index as the ratio of additives and water content decreases. The result of the stabilization test of polymerization show an increase of extractables along with increase of the ratio of additives, but the difference is not significant for all samples, so it can be judged that the stabilization of the polymer is maintained. Therefore, the additions of styrene and PVP should be taken into consideration for their effects on the physical properties of silicone hydrogel lens.

• Elastomers and Composites
• /
• 제39권3호
• /
• pp.217-227
• /
• 2004

주사슬에 triad 메소겐 단위와 butylene terephthalate (BT) 단위를 갖는 새로운 액정 중합체를 중축합에 의해서 합성하였다. 합성된 중합체는 nematic 액정상을 보였으며 액정상으로의 전이온도는 $260^{\circ}C$를 보였다. PBT 용액에서 in-situ 중합에 의해서 제조된 TLCP/PBT 블렌드들의 특성 조사는 DSC, TGA, SEM, XRD 그리고 DMTA를 이용하여 이루어 졌다. 블렌드들은 PBT 매트릭스내에서 $0.05{\sim}0.2{\mu}m$ 사이즈를 갖는 잘 분산된 TLCP상들을 보여 주었다. TLCP 농도가 5에서 20wt%로 증가함에 따라서 블렌드내의 순수한 PBT의 ${\Delta}Hm$은 증가하였다. 이는 TLCP가 PBT 매트릭스 내에서 조핵제의 역할을 하였기 때문이다. 블렌드의 기계적 성질들은 TLCP의 농도에 의존하였는데 이 또한 TLCP가 블렌드 내에서 보강제 역할을 하였기 때문이다. 액정상과 PBT 매트릭스 상간에 좋은 계면 접착력을 보여 주었으며 in-situ 중합에 의해서 제조된 블렌드는 용융 블렌딩에 의해서 제조된 블렌드들보다 더욱더 높은 기계적 성질과 잘 분산된 TLCP 도메인들을 보여 주었다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.399-409
• /
• 2003

The first esterification reactor in the continuous polymerization of poly(ethylene terephthalate) has been analyzed by solving the material balances for the two-phase system with respect to the solubility of terephthalic acid. The Newton-Raphson method was used to solve the material balance equations instead of the Simplex method that is frequently used for finding a minimum point of a residual rather than a solution of an equation. A solution for the material balance equations, with the constraint of non-zero liquid phase fraction, could not be obtained with the solubility data of Yamada et al., but could be obtained with solubilities over a minimum value that is larger than their data. Thus, the solubility data of Yamada et al. are considered to be too small. On the other hand, the solubility data of Baranova and Kremer are so large that they gave a solution with the liquid phase only. Based on our results, several typical solubility curves satisfying the constraint of a non-zero liquid phase fraction are suggested in this study; we studied the reaction characteristics of the system using these curves. A higher temperature and a lower pressure are preferred for reducing the content of diethylene glycol.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1341-1345
• /
• 2011

A novel ruthenium(II) complex, [$RuCl_2(DMSO)_2$(PhenTPy)] has been synthesized by the condensation of $RuCl_2(DMSO)_4$ with (1-(1,10-phenanthrolinyl)-2,5-di(2-thienyl)-1H-pyrrole)[PhenTPy] in $CHCl_3$ solution. The [$RuCl_2(DMSO)_2$(PhenTPy)] complex modified electrode was fabricated through the electropolymerization of the monomer in a 0.1 M tetrabutylammonium perchlorate (TBAP)/$CH_2Cl_2$ solution, to take advantage of the electronic communication between metal ion center by the conjugated backbone. The UV-visible spectroscopy (UV), mass spectrometry (MS), and cyclic voltammetry (CV) were employed to characterize the [$RuCl_2(DMSO)_2$(PhenTPy)] complex and its polymer (poly-Ru(II)Phen complex). The poly-Ru(II)Phen complex modified electrode exhibited an electrocatalytic activity to the oxidation of acetaminophen and the catalytic property was used for the analysis of acetaminophen at the concentration range between 0.09 and 0.01 mM in a phosphate buffer solution (pH 7.0).

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.233-233
• /
• 2006

[ $Y_{2}O_{2}S:Eu$ ], a red phosphor, coated with silica nanoparticles or nanocomposites composed of silica nanoparticles and polymeric materials such as PMMA and PVP was prepared via sol-gel process. Samples were prepared from four different methods coded P1, P2, P3, and P4. P1 includes a conventional sol-gel process and a dip-coating method while P2 has the same procedure with P1 except that nanocomposites containing both silica nanoparticles and polymer prepared by sol-gel process were used as coating materials. In P3 method, phosphors were dispersed in a solution containing silica precursor, i.e., TEOS and then polymerization was performed to coat onto the phosphors surface while P4 followed the same procedure with P3 except that a solution containing both TEOS and organic monomer were used in preparing coating materials. Among various coating methods examined in this study, uniform coating of phosphor could be achieved by using method P4, i.e., phosphor surface coating in a solution containing hydrophobic monomer and TEOS. Furthermore, $Y_{2}O_{2}S:Eu$ red phosphor coated with nanocomposite composed of PMMA matrix and silica nanoparticles exhibited enhanced PL intensity and long-term stability.