• 설비공학논문집
• /
• 제15권9호
• /
• pp.718-726
• /
• 2003

Carbon dioxide ocean disposal is one of the promising options to reduce carbon dioxide concentration in the atmosphere because the ocean has vast capacity for carbon dioxide sequestration. However, the dissolution rate of liquid carbon dioxide in seawater must be known in advance in order to estimate the amount of carbon dioxide sequestration in the ocean. Therefore, in the present study, calculations of the solubility, the surface concentration and the dissolution behavior of carbon dioxide when liquid carbon dioxide is released at 1,000m and 1,500m in depth are peformed. The results show that the droplet is completely dissolved below 500 m in depth if the carbon dioxide droplet is released both at 1,000m in depth with the initial droplet diameter of 0.011m or less and at 1,500m in depth with the diameter of 0.016 or less. Also, the surface concentration of carbon dioxide droplet with the hydrate film is about 50% of carbon dioxide solubility at 1,500 m in depth and about 60% of carbon dioxide solubility at 1,000 m in depth.

• 한국재료학회지
• /
• 제13권9호
• /
• pp.619-624
• /
• 2003

This paper describes a method to control Mn and Fe contents in recycled AZ91D ingots, based on the mutual solubility of Mn and Fe in AZ91 alloy melts. For this purpose, Fe solubility with the change of Mn content and temperature was investigated in the homogenized and re-precipitated liquid AZ91 alloy. The increase of the amount of Mn added to the melt resulted in the decrease of Fe content. The data obtained in this study was adopted to the pilot plant for recycling of the scrap. As a result, Mn and Fe contents measured in the recycled ingot were in good agreement with ASTM B93 standard.

• 반도체디스플레이기술학회지
• /
• 제4권4호
• /
• pp.13-17
• /
• 2005

The behavior of ozone in $NH_4OH$ was investigated to evaluate the solution as a cleaning chemical of the silicon wafer. The solubility of ozone in DI(Deionized) water increased as the oxygen flow-rate decreased and ozone generator power increased. Ozone in DI water showed solubility of 100 ppm or higher at room temperature. Ozone concentration was stabilized at the range of ${\pm}2ppm$ by controlling oxygen flow rate and ozone generator power. On the contrary, the solubility of ozone in $NH_4OH$ was very low and strongly depended on the concentration of $NH_4OH$ and pH. The redox potential of ozone was saturated within 10 minutes in DI water and decreased rapidly with the addition of $NH_4OH$. The behavior of ozone in $NH_4OH$ is well explained by redox potential calculation.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.105-110
• /
• 1998

In the make-up product, Eye-shadow products have several purposes of enhancing product quality such as providing the beauty (variation of shape, clean appearance), feeling, continuity and adhesion. In this paper, newly developed wet type back injection press process is introduced so as to increase higher value products which providing various the beauty. The solvent takes an essential role to provide the fluidity of the powder bulk during the pressed-process of wet type pressed product. In this study, the effect of solvent in the oil binder was investigated, And the higher quality condition of the wet type pressed product was built to apply cosmetic preparation. Firstly, the system was designed powder phase as non treated pigment. The oil binder phase is categorized as hydrocarbons(Mineral oil, Squalane), Silicones(Methicone, Dimethicone ), esters (Octyldodecanol, Octyl Dodecyl Myristate). The solvent phase used was C 7-8 isoparaffin and Isopropyl Alcohol. The interaction of oil binder and solvent is investigated by measuring mass of final oil binder and the each solubility parameter. It was found that the higher the solubility the higher the degree of change in the final composition of the oil binder. In order to maintain the quality of the final product, the solvent used in pressed-process should be hydrophobic with oil binder.

• Archives of Pharmacal Research
• /
• 제26권2호
• /
• pp.173-181
• /
• 2003

A polymeric micelle drug delivery system was developed to enhance the solubility of poorly-water soluble drug, biphenyl dimethyl dicarboxylate, DDB. The block copolymers consisting of poly(D,L-lactide) (PLA) as the hydrophobic segment and methoxy poly(ethylene glycol) (mPEG) as the hydrophilic segment were synthesized and characterized by NMR, DSC and MALDI-TOF mass spectroscopy. The size of the polymeric micelles measured by dynamic light scattering showed a narrow monodisperse size distribution with the average diameter less than 50 nm. The MW of mPEG-PLA, 3000 (MW of mPEG, 2 K; MW of PLA, 1K), and the presence of hydrophilic and hydrophobic segments on the polymeric micelles were confirmed by MALDI-TOF mass spectroscopy and NMR, respectively. Polymeric micelle solutions of DDB were prepared by three different methods, i.e. the matrix method, emulsion method and dialysis method. In the matrix method, DDB solubility was reached to 13.29 mg/mL. The mPEG-PLA 2K-1K micelle system was compared with the poloxamer 407 micelle system for their critical micelle concentration, micelle size, solubilizing capacity, stability in dilution and physical state. DDB loaded-polymeric micelles prepared by the matrix method showed a significantly increased aqueous solubility (＞5000 fold over intrinsic solubility) and were found to be superior to the poloxamer 407 micelles as a drug carrier.

• Fisheries and Aquatic Sciences
• /
• 제17권1호
• /
• pp.59-65
• /
• 2014

We measured the reductions in size and solubility of mackerel muscle that was freeze-dried, deoiled by supercritical carbon dioxide (SC-$CO_2$), or roasted. The percent size reduction and solubility were high in SC-$CO_2$-treated muscle compared with freeze-dried and roasted muscle. We used oil-free residues to test for heavy metals and determine microbial safety. The SC-$CO_2$, hexane, and ethanol were used to separate oil from muscle. The concentrations of cadmium (Cd) in all treated muscles were less than the values reported in the literature, as were the concentrations of lead in SC-$CO_2$- and hexane- treated muscle. In contrast, concentrations of arsenic and mercury in muscles were greater than the reported values regardless of treatment. Zinc and iron, which are beneficial for health, were found in high levels after all treatments of muscle tissue. After 6 months of storage at different temperatures, SC-$CO_2$-and ethanol-treated muscle showed few bacterial colonies, and none were found after 4 months of storage at $-20^{\circ}C$. These results will be useful to food-processing industries for maintaining high-quality, safe mackerel muscle.

• 한국환경과학회지
• /
• 제12권5호
• /
• pp.551-557
• /
• 2003

An experimental study of the absorption of CS$_{2}$ in the secondary amine diethanolamine(DEA) was performed in this work. The primary objectives were to investigate an analogy between N2O and CS$_{2}$ permitting estimation of the physical solubility and diffusivity of the sulfur gases in the reacting amino solutions. The solubilities of CS$_{2}$ in water at 25, 40 and 6$0^{\circ}C$ has been measured. The data show fair agreement with previous literature values. The solubility of CS$_{2}$ in 5-25 weight % polyethylene glycol has been measured in order to investigate a possible analogy between CS$_{2}$ and N$_{2}$O The diffusivities of CS$_{2}$ in water and the reaction rate between CS$_{2}$ and DEA has been measured at 25 and 4$0^{\circ}C$, using a wetted sphere apparatus operated at approximately 1/3 atmospheres pressure, which is a previously untried method.

• 설비공학논문집
• /
• 제12권2호
• /
• pp.209-217
• /
• 2000

The solubility and miscibility measurement apparatus was developed and used to obtain data for refrigerant/oil mixture. The solubility and miscibility data for R-410A/68 ISO VG polyol ester (POE) oil mixture are obtained over the temperature range from -20 to $60^{circ}C\;with\;10^{\circ}C$ intervals and the oil concentration range from 0 to 90 wt%. Using the experimental data, an empirical model was developed to predict the solubility relations for R-410A/POE oil mixture at equilibrium. In the R-410A/Solest 68 oil mixture, the average root-mean-square deviation between measured data and calculated results from the empirical model is 3.4% and in the R-4104/EMKARATE RL 68H oil mixture, that is 2.86%. For R-410A/68 ISO VG POE oil mixture immiscibility was usually observed at the low oil concentrations(5~30 wt%) over the all experimental temperature range($-20~60^{circ}C$) and at the high oil concentrations(50~90 wt%) over the low experimental temperature range($-2O~0^{circ}C$).

• International Journal of Industrial Entomology and Biomaterials
• /
• 제25권1호
• /
• pp.133-137
• /
• 2012

To increase the solubility of lyophilized sericin, we added three types of lyoprotectant: sucrose, trehalose and dextran. The addition of lyoprotectant increased the solubility of lyophilized sericin especially when 1.0% of sucrose, 1.0% and 1.5% trehalose are added. The secondary structure of lyophilized sericin showed that the content of ${\beta}$-sheet or aggregated structure reduced in the presence of lyoprotectant. The morphology of lyophilized was also affected by the addition of lyoprotectant. Whereas flake structure was obtained in the case of pure sericin, a scattered and relatively small flake structure was formed in the presence of lyoprotectant. These finding shows that the presence of lyoprotectant prevents aggregation of sericin molecules and increases the solubility of lyophilized sericin.

• 청정기술
• /
• 제14권3호
• /
• pp.153-159
• /
• 2008

여드름 치료제인 트리클로산의 초임계이산화탄소에 대한 용해도를 가변부피셀(Variable volume cell)을 이용하여 온도 313.15, 323.15와 333.15 K에 대해서 10 - 40 MPa 압력범위에서 측정되었다. QLF (Quasi-chemical nonrandom lattice fluid) 상태방정식을 이용하여 측정된 용해도를 잘 계산할 수 있었고, 이 자료를 미세입자공정에 활용하였고. 입자크기에 미치는 온도와 압력의 효과를 해석하였다.