• Journal of the Korean Home Economics Association
• /
• v.35 no.5
• /
• pp.239-248
• /
• 1997

to design nature-affinitive, reasonable and effcient thermal environment plannings and facilities, the holding patterns of heating-cooling facilities·accessory devices and residents' evaluation in Cheju Province were surveyed as well as residents' understanding for them. Major findings of this study are summarized as follows: 1) In the cooling system, the percentage of air-conditioner possessor was 19.4%, which was lower possessive rate than mainland's. The location of air-conditioner was mainly public area. That is, 55.3% of the location is livingroom, and the rest was Anbang. the general cooling accessory device was a fan. It was frequently used at the children's room and the dining room. The possessive patterns of air-conditioner depend on the characteristics of residents, such as the academic carrier and the average monthly income. Characteristics of house for air-conditioner possess depend on the location, house type, the size of floor space. 2) In the heating system, individual heating system reached to 57.3%. Heating accessory devices were oil stove and electric heating blanket. Only 32.2% of survey population were holders. 3) Residents preferred better ventilated room arrangement, which was characteristic of subtropical areas. 4) The preferred condition for heating-cooling facilities and accessory devices were strong solidity, less air pollution, and less noise.

• Bulletin of the Korean Mathematical Society
• /
• v.47 no.5
• /
• pp.997-1000
• /
• 2010

We prove that the reduced free product of $k\;{\times}\;k$ matrix algebras over abelian $C^*$-algebras is not the minimal tensor product of reduced free products of $k\;{\times}\;k$ matrix algebras over abelian $C^*$-algebras. It is shown that the reduced group $C^*$-algebra associated with a group having the property T of Kazhdan is not isomorphic to a reduced free product of abelian $C^*$-algebras or the minimal tensor product of such reduced free products. The infinite tensor product of reduced free products of abelian $C^*$-algebras is not isomorphic to the tensor product of a nuclear $C^*$-algebra and a reduced free product of abelian $C^*$-algebra. We discuss the freeness of free product $II_1$-factors and solidity of free product $II_1$-factors weaker than that of Ozawa. We show that the freeness in a free product is related to the existence of Cartan subalgebras in free product $II_1$-factors. Finally, we give a free product factor which is not solid in the weak sense.

• Analytical Science and Technology
• /
• v.23 no.5
• /
• pp.505-510
• /
• 2010

When polybutadiene dissolved in toluene was a binder of carbon powder, the volatility of solvent just after electrode fabrication assured the mechanical solidity of the carbon paste electrode. This characteristic met the qualifications for practical use of carbon paste electrodes. A new enzyme electrode bound with butadiene rubber was constructed. In order to confirm whether it shows quantitative electrochemical behaviors or not, its electrochemical kinetic parameters, e.g. the symmetry factor, the exchange current density, the capacitance of double layer, the time constant, the maximum current, the Michaelis constant and other factors were investigated. These experimental facts showed that butadiene rubber is a recommendable binder for practical use of a carbon paste electrode.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.2
• /
• pp.151-156
• /
• 2011

This study examined the casting analysis of fuel pressure regulator of LPI vehicles. We aims to predict all the phenomenon accompanied by flow and solidification in die casting, and maximize productivity and quality through optimal casting design. As a result of comparing Types A and B of casting design, it was found that the number of overflow affected flow, flowspeed and solidification temperature. And there was a minute difference between solidification temperatures at thick section of the spare parts. Solidification began at temperatures of $624^{\circ}C{\sim}630^{\circ}C$ but after the casting was completed, temperatures at the center of the parts were $600^{\circ}C{\sim}614^{\circ}C$ Temperature of molten metal showed optimal flow at temperature of $680^{\circ}C$. It began to solidity around at $650^{\circ}C$ and to be cooled between $580^{\circ}C{\sim}550^{\circ}C$ in high speed. When the process was analysed through a computer simulation, it was found that hardness of regulators manufactured through Type B of overflow was above $H_R60$.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.427-433
• /
• 2020

Based on the natural colors and techniques of Korean traditional Dancheong, the image from splendor and magnificence is used as a jewel in making ornaments by subjective interpretation of the researcher. The purpose of this paper is to propose the possibility of using as a jewelry design by combining the possibilities of various color expressions, the combination of solidity and luster synthetic resin by utilizing natural pigments and mono images used in Korean traditional monophonic. In this study, this study presented the possibility of accessing in the life of a modern person pursuing a lifestyle by introducing a mono image into jewelry design, and at the same time, approaching ornaments by using traditional materials of the past, modern materials, and digital production methods. We are looking for a wide variety of jewelry designs to be utilized.

• Wind and Structures
• /
• v.25 no.3
• /
• pp.215-232
• /
• 2017

Wind tunnel tests and numerical aerodynamic analyses were conducted for an integrated catwalk structure under strong winds. From the wind tunnel tests, it is found that the aerodynamic coefficients were different from those of the typical type. The drag coefficient was larger than typical and was sensitive to number of vertical meshes installed rather than the solidity ratio. Comparing with typical catwalk, the integrated one showed larger deformation under strong wind, and the large torsional deformation are mainly caused by drag force. It did not show aerodynamic divergence even the torsional deformation reaching $20^{\circ}$. The reason could be that the stiffness is smaller and thus the catwalk is able to deform to the shape compactable with higher loading. Considering safety for construction, storm rope system is introduced to the catwalk to reduce the deformation to acceptable level.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.10.1-10.5
• /
• 2017

Background: Because of changing surgical procedures in the fields of oral and maxillofacial surgery, new methods for surgical education are needed and could include recent advances in digital technology. Many doctors have attempted to use digital technology as educational tools for surgical training, and movies have played an important role in these attempts. We have been using a 3D full high-definition (full-HD) camcorder to record movies of intraoral surgeries. Method: The subjects were medical students and doctors receiving surgical training who did not have actual surgical experience (n = 67). Participants watched an 8-min, 2D movie of orthognathic surgery and subsequently watched the 3D version. After watching the 3D movie, participants were asked to complete a questionnaire. Result: A lot of participants (84%) felt a 3D movie excellent or good and answered that the advantages of a 3D movie were their appearance of solidity or realism. Almost all participants (99%) answered that 3D movies were quite useful or useful for medical practice. Conclusions: Three-dimensional full-HD movies have the potential to improve the quality of medical education and clinical practice in oral and maxillofacial surgery.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.635-638
• /
• 2008

Online games' environments have recently changed with developments of computer technique. Various factors such as respective for realistic expression, solidity, the quality of the material, shadow, should be considered. In these factors, shadow expression plays a important role for realistic one. A lot of repeated operation should be executed to provide shadow. In other words, realm division against a lot of dots to estimate objections and the degree of brightness should be divided. This paper provides effective methods to perform realistic shadow through mapping LOD of objections as shadow without drawing data to judge the realm of shadow for shadow creation.

• Journal of Magnetics
• /
• v.16 no.1
• /
• pp.71-73
• /
• 2011

Hybrid electric vehicles have attracted much attention of late, emphasizing the necessity of developing traction motors with a high input current and a wide speed range. Among such traction motors, various researches have been conducted on interior permanent-magnet synchronous motors (IPMSMs) with high power density and mechanical solidity. Due to the complexity of its parameters, however, with nonlinear motor characteristics and current vector control, it is actually difficult to accurately estimate the base speed within an actual operating speed range or a voltage limit. Moreover, it is impossible to construct an efficiency map as the efficiency differs according to the control mode. In this study, a simulation method for operation performance considering the nonlinearity of IPMSM was proposed. For this, datasets of various nonlinear parameters were made via the finite-element method and interpolation. Maximum torque-per-ampere and flux-weakening control were accurately simulated using the datasets, and an IPMSM efficiency map was accurately constructed based on the simulation. Lastly, the validity of the simulation was verified through tests.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.93-100
• /
• 2019

The cavitation of a turbopump inducer develops from the inception to a critical point, and encounters breakdown finally. In this study, we evaluated the characteristics and predictions of cavitation inception for the turbopump inducer using empirical equations. The empirical equation for the elliptical plate predicted the generation of cavitation inception of the turbopump inducer relatively well. However, in case of the marine propeller, it showed a considerable difference owing to the Reynolds number of the operating point. The cavitation inception occurred earlier as the number of blades increased. However, the solidity had no major impact on the cavitation inception because the cavitation occurred locally at the tip of the leading edge.