• Journal of the Korean Ceramic Society
• /
• v.30 no.8
• /
• pp.643-650
• /
• 1993

NdAl3(BO3)4 have been developed for miniature solid state laser material. Single crystals of NdAl3(BO3)4 were grown by TSSG technique using BaB4O7 flux. The effects of growth conditions such as cooling rate, seed orientation and rotation speed on crystal quality and the morphology were studied. At the cooling rate of 2.4$^{\circ}C$/day and the crystal rotation speed of 30~40rpm with the seed orientation in <201> or <100> directions, transparent and light violet colored crystals in size of 10$\times$15$\times$20㎣ with well developed {010}, {111}, {111}, {021}, {001}, {102}, {112}, {021} faces were obtained. By X-ray diffraction analysis, the space group was determined as C2/c, and the X-ray powder data was obtained.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.72-78
• /
• 1993

The application of time-resolved laser induced fluorescence spectroscopy (TRLIF) to the complexation studies of Eu(III) and Cm(III) with humic substances is described. Using this method, three different spectroscopic characteristics(excitation spectra, emission spectra, and lifetimes) of these aquo ions and their complexes can be directly measured. By observing shifts in the wavelength and changes in the lifetime and intensities of the fluorescence emission, the information on the complexation behavior of humic substances with these trivalent metal cations in an aqueous solution, as well as energy transfer mechanisms, can be obtained. In addition, this method allows precise spectroscopic quantification of the complexation processes at very low concentrations of both components.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.172-176
• /
• 1991

4d 전이원소인 rhodium을 phosphate 유리에 첨가하여 광흡수 및 photoluminescence 스펙트럼을 측정하였다. 이로써 rhodium 이온의 tunable solid state laser용의 광활성 이온으로서의 가능성을 조사하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.92-93
• /
• 2001

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.158-159
• /
• 2004

• Journal of Welding and Joining
• /
• v.27 no.4
• /
• pp.18-25
• /
• 2009

See Full Text

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.275-276
• /
• 2011

We have investigated the holographic grating formation on Ag-doped amorphous chalcogenide As2Se3 thin films with Ag layer. The basic optical parameter which is a refractive index and extinction coefficent was taken by n&k analyzer. The source of laser was selected based on these parameter. Holographic gratings have been formed using He-Ne laser (wavelength: 632.8 nm) Diode Pumped Solid State laser (DPSS, wavelength: 532.0 nm) under [P:P] polarized the intensity polarization holography. The diffraction efficiency was obtained by +1st order intensity.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.208-211
• /
• 1995

Five cast gamma titanium aluminides, Ti-45~48%Al-2%Nb-2%Cr (nominal composition in at. %), were laser welded and their weld cracking susceptibilities were evaluated. Laser power, traversing rate and preheat temperature were systematically varied to generate a series of welds exhibiting a wide range of cooling rate ($100^{\circ}C/s-10,000^{\circ}C/s$). As Al content increased and the weld cooling rate decreased, solidification cracking susceptibility increased while solid-state cracking susceptibility decreased. Through laser beam energy input control and preheat, it was determined possible to produce high quality laser welds.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.1991-1995
• /
• 2005

Sensitivity factors of elements by a glow discharge mass spectrometry (GD-MS) were intensively investigated and compared with a laser ablation inductively coupled plasma-mass spectrometry (ICP-MS). In case of copper matrix, the sensitivity factor by GD-MS generally decreases with the increase of the mass number of element. The details are a little different between each data measured by Faraday and multiplier detectors. The factor by a multiplier detector drastically decreases with the mass increase in the region of low mass as in Faraday detector’s case, but slowly in the high mass region. On the contrast, the sensitivity factor of solution standard by a conventional ICP-MS slowly increases with the increase of elemental mass number even though there are some exceptions such as gold and also the sensitivity factor by a laser ablation ICP MS generally increases with mass number of element in the specimen of glass type. In case of steel matrix, any definite trends could not be shown in the relationship between the GD-MS’s sensitivity factor and elemental mass.

• Transactions of the KSME C: Technology and Education
• /
• v.5 no.1
• /
• pp.53-61
• /
• 2017

In this review paper, the trend for optical technology is described as the development of mechanical industries in the $21^{st}$ century. Optical technology has been essential in various industries such as mechanical, electronic industries as the convergence technology. Based on the roadmap of optical science and technology, 12 working groups are categorized as the technical point of view and most of them are closely related to mechanical industries. Especially, solid-state lighting, optical metrology and industrial laser processing are important technologies in precision engineering and manufacturing. This paper introduces these optical technologies and their technological issues to look into the development trends and expectation.