• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.115-119
• /
• 2001

Contaminant retardation factor is derived from the colloidal and contaminant transport equations for a four-phase porous medium: an aqueous phase, two mobile colloidal phases, and a solid matrix. It is assumed that the contaminant sorption to solid matrix and colloidal particles and the colloidal deposition on solid matrix follow the linear isotherms. The behavior of the contaminant retardation factor in response to the change of model parameters is examined employing the experimental data of Magee et al. (1991) and Jenkins and Lion (1993). In the four-phase system, the contaminant retardation factor is determined by both the contaminant association with solid matrix and colloidal particles and the colloidal deposition on solid matrix. The contaminant mobility is enhanced when the affinity of contaminants to mobile colloids increases. In addition, as the affinity of colloids to solid matrix decreases, the contaminant mobility increases.

• Journal of Korea Foundry Society
• /
• v.10 no.4
• /
• pp.309-315
• /
• 1990

Aluminum alloy matrix composites reinforced by SiC particles were prepared by rheocompocasting, a process which consists of the incoporation and distribution of reinforcement by stirring within a semi-solid alloy. When the volume fraction of SiCp and stirring speed were fixed, the dispersion of SiCp in Al-matrix alloy depended on stirring time and solid volume fraction in slurry. The results were as follows : 1) As a dispersed SiCp during stirring at $647^{\circ}C$ in 6063-Al alloy, SiC was better dispersed than that other temperature, where solid volume fraction was 43% in slurry. 2) When increased solid fraction in slurry, rate of dispersing SiC increased during stirring and porosities decreased in matrix alloy after casting. 3) Inspite of stirring with 800rpm, since solid particles of matrix alloy in slurry joined each other and occured joining growth, so that SiC was not dispersed into solid particle.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.135-142
• /
• 2004

The objective of this study was carried out to determine which method is effective for improving seed germination in carrot and onion among osmotic or solid matrix priming. Seeds were osmotic primed with -0.5 MPa polyethylene glycol 8000 (PEG) solution and solid matrix primed with Micro Cel E (seed, Micro Cel E, and water mixed with the ratio of 4.0：2.0：8.0 by weight for carrot, and the ratio of 4.0：1.2：5.0 for onion at $20^{\circ}C$ for 4 days). Seeds were rapidly absorbed water after osmotic priming and solid matrix priming treatment. The moisture content of solid matrix primed seeds was lower than that of osmotic primed seeds in carrot and onion. Osmotic priming and solid matrix priming did not influenced on increasing of percent germination, but $T_{50}$ of treated seeds was shorter than those of untreated seeds at four temperature regimes. The effects of osmotic or solid matrix priming in reducing the $T_{50}$ was greater when the seeds were germinated at $15^{\circ}C$ than at $25^{\circ}C$ and $30^{\circ}C$ temperature. Solid matrix primed seeds germinated faster than osmotic primed seeds at all temperature in both carrot and onion. After priming, surface-dried seeds germinated faster than dried-back seeds in carrot and onion. Emergence speed of carrot and onion seeds was faster than untreated seeds by osmotic priming or SMP treatment although the final emergence percentage was not significantly influenced. On the other hand, early growth was not significantly influenced by osmotic priming or SMP treatment of carrot and onion seeds.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.358-364
• /
• 2006

This study was conducted to develop optimal solid culture medium for Tricholoma matsutake. As the solid matrix, granitic soil, perlite, vermiculate, pine sawdust and peat moss were compared regarding their effected on mycelial growth. Ergosterol content which is a fungal wall component was used as the growth index of the mycelia. Among the various solid matrixes, the granitic soil, perlite and mixture of the two supported the growth most. Barely flour appeared to be very effective on the stimulating of the mycelial growth when added to the solid matrix. An mixture of the matrix contained an even (1:1:1:1, v/v/v/v) mixture of granitic soil, perlite, vermiculate and pine sawdust. T. matsutake started growth 2 weeks after inoculation and reached stationary growth phase after 8th weeks in the solid matrix mixture. The mycelial density in the solid matrix was 7 times higher than that in fairy-ring soil. In addition, 30~70% water content and 10% humus soil in the solid matrix also supported good growth suggesting that T. matsutake needs humus soil for a nutrient sources. The solid matrix developed in the present study could be used to study physiological characteristics of T. matsutake as well.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.581-593
• /
• 1990

A semi-solid alloy in which solid and liquid phase are co-existing is obtained by strirring of Al7075 molten metal. A semi-solid alloy is dependent on the corresponding temperature within the solid-liquid range, and the process parameters should be controlled accurately to obtain the homogeneous semi-solid alloy. The possibility o homogeneous fiber-reinforce aluminum alloy by addition of $Al_{2}$O$_{3}$ short fibers with vigorous agitation was investigated. The billet of composite materials was fabricated by squeeze casting, and homogeneous dipersion state of fibers in billet of fabricated metal matrix composites was observed. A slurry of semi-solid short fiber metal matrix composites is used in the direct rolling process, and this process showed the fabrication possibility of metal matrix composite sheets. The fabricated sheet was tested regarding vickers hardness, elongation and micro-structure. It has become clear that mashy state processing and working are very useful to obtain parts of composites material closed to near net shape.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.1
• /
• pp.13-18
• /
• 1990

Hydrocortisone (HC) sustained-release suppositories were prepared by using a solid matrix of methacrylic acid-methacrylic acid methyl ester copolymer $(Eudragit\;L_{100}^{R}:\;EL)$ as a poorly water soluble carrier and polyethylene glycole 1540 (PEG) as an water soluble carrier. HC release rate was controlled by complexation with ${\beta}-cyclodextrin$ $({\beta}-CyD)$ which was confirmed by X-ray diffractometry, IR-spectroscopy and differential scanning calorimetry. Release rate of HC from the EL-PEG matrix suppositories decreased with increase of EL contents. The release rale from $HC-{\beta}-CyD$ complex decreased in the following order: $HC-{\beta}-CyD/PEG$ > HC/PEG > $HC-{\beta}-CyD/EL_{10%}-PEG$ > $HC/EL_{10%}-PEG$ > $HC-{\beta}-CyD/EL_{15%}-PEG$ > $HC/EL_{15%}-PEG$ > $HC-{\beta}-CyD/EL_{20%}-PEG$ > $HC/EL_{20%}-PEG$. The crystallinity of HC in polymer matrix was identified using X-ray diffractometer and the surface of matrix suppositories after release test was examined by scanning electron microscopy. The sustained release of HC from these matrix suppositories was attributed to the network structure of EL.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.433-440
• /
• 2003

Osmotic and solid matrix priming treatments enhanced germination performance. We compared osmotic with solid matrix priming to determine the more effective treatment for improving seed germination in pepper and tomato. Seed hydration was immediately observed after osmotic priming and solid matrix priming treatment. The moisture content of solid matrix primed seeds was lower than that of osmotic primed seeds in the two vegetable crops. Osmotic priming and solid matrix priming did not increased percent germination, but showed shorter number of days to 50% of the final germination percentage ($T_{50}$) compared with untreated seeds, regardless of germination temperature. $T_{50}$ value was reduced in osmotic or solid matrix primed pepper seeds about 6.0, 5.0, 4.6 and 4.0 days compared with untreated seeds at 15, 20, 25, and $30^{\circ}C$, respectively. While, that in tomato seeds was reduced about 3.3, 5.0, 4.6 and 4.0 days compared with untreated seeds at 15, 20, 25, and $30^{\circ}C$, respectively. The effectiveness of osmotic priming or solid matrix priming in reducing the $T_{50}$ was greater when the seeds were germinated at $15^{\circ}C$ than at temperature of higher than $20^{\circ}C$. Solid matrix primed seeds germinated faster than osmotic primed seeds at all temperature in pepper. However, there was no significant difference on the percentage germination between solid matrix and osmotic primed seeds in tomato. After priming, dried-bark seeds showed faster germination than surface-dried seeds in pepper. On the other hand, there was no significant difference in tomato. Emergence of pepper and tomato seeds was markedly enhanced by osmotic priming or SMP treatment although the final emergence percentage was not significantly influenced. On the other hand, early growth was not significantly influenced by osmotic priming or SMP treatment of pepper and tomato seeds.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.700-705
• /
• 2013

This study was initiated to evaluate hydrophilic polymers (hydrogels) as a new solid matrix medium for seed-priming of Heteropappus arenarius Kitam. Solid matrix priming (SMP)-media were prepared with the combination of Na- and K-based hydrogels and hydrogels with three different dry levels (DC; 70%, 80%, and 90%). Priming was performed in the dark at 15 or $20^{\circ}C$ for 24 hours, and all primed seeds were incubated at $20^{\circ}C$ in the dark for the germination test. Non-primed seeds and seeds primed with distilled water (DW) were also included. To reach the germination rate of 50% ($T_{50}$), it took 4.0 days for non-primed seeds, and 3.6 and 3.9 days for DW-primed seeds at 15 and $20^{\circ}C$, respectively. Na-based hydrogel-primed seeds with 70% DC (Na 70%) showed the fastest germination, which respectively took and 1.9 and 1.8 days at 15 and $20^{\circ}C$ to $T_{50}$. K-based hydrogel-primed seeds with 70% DC showed the fastest germination among K-based hydrogels with various DC levels, but it took 0.6 days more to $T_{50}$ compared to Na 70%. The hydration rate (HR) of DW-primed seeds was 37% lower than that of Na 70%-primed seeds at $15^{\circ}C$ priming temperature, which indicates that Na 70% priming is the best solid matrix priming condition for promoting the germination of H. arenarius seeds.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.8
• /
• pp.409-417
• /
• 2015

A simplified rotary heat-exchanger model was developed with an assumption of a linear temperature distribution along the flow direction. Based on the model, the exact fluid solution and solid temperature variations were obtained and verified from a comparison with previous numerical studies. The heat transfer in the rotary heat exchanger was investigated using the theoretical solutions. The heat exchanger's effectiveness was shown to be saturated, with a rotational-speed increase that is higher than a critical value that is solely dependent on the thermal capacity of the solid matrix but independent of the fluid flow rate; the saturated value of the effectiveness was determined only by the NTU of the heat exchanger. Where the thermal diffusivity of the solid matrix is so slight that the thermal penetration depth becomes smaller than the matrix thickness, the effective thermal capacity of the solid matrix decreased according to the penetration depth.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.175-178
• /
• 2006

Solid-state dye-sensitized solar cells were fabricated using a polymer matrix in electrolyte in the purpose of the improvement of the durability in the dye-sensitized solar cell. In these dye-sensitized solar cells, the polymer electrolyte consisting of $I_2$, LiI, ionic liquid, ethylene carbonate/propylene carbonate and polymer matrix was casted onto $TiO_2$ electrode impregnated Ruthenium complex dye as a photosensitizer. Photovoltaic properties of solid-state dye-sensitized solar cells using polymer matrix (PMMA, PEG, or PAN) were investigated. Comparing photovoltaic effects of cells using hole conducting polymers (BE or 6P) instead of polymer matrix, we investigated the availability of the solid-state polymer electrolyte in dye-sensitized solar cells.