• Clinical Endoscopy
• /
• v.57 no.2
• /
• pp.237-245
• /
• 2024

Background/Aims: Endoscopic ultrasound-guided tissue acquisition (EUS-TA) using Franseen needles is reportedly useful for its high diagnostic yield. This study compared the diagnostic yield and puncturing ability of EUS-TA using 22-gauge cobalt-chromium (CO-Cr) needles with those of stainless-steel Franseen needles in patients with solid pancreatic lesions. Methods: Outcomes were compared between the 22-gauge Co-Cr Franseen needle (December 2019 to November 2020; group C) and stainless-steel needle (November 2020 to May 2022; group S). Results: A total of 155 patients (group C, 75; group S, 80) were eligible. The diagnostic accuracy was 92.0% in group C and 96.3% in group S with no significant intergroup differences (p=0.32). The rate of change in the operator (from training fellows to experts) was 20.0% (15/75) in group C and 7.5% (6/80) in group S. Stainless-steel Franseen needles showed less inter-operator difference than Co-Cr needles (p=0.03). Conclusions: Both Co-Cr and stainless-steel Franseen needles showed high diagnostic ability. Stainless-steel Franseen needles are soft and flexible; therefore, the range of puncture angles can be widely adjusted, making them suitable for training fellows to complete the procedure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.899-904
• /
• 2004

The objectives of the experiment were to examine the effects of extrusion process variables on the yield of extruded ginseng extract and to determine the effect of ratio of extruded ginseng extract and microcrystalline cellulose on characteristics of spheronized granules by cold extrusion-spheronization process. Extrusion process variables observed were feed moisture (15, 22, 29%), die temperature (90 110 13$0^{\circ}C$) and screw speed (150 200, 250 rpm). The results showed that moisture content of dried ginseng significantly affected extraction yield (P<0.05). The less moisture content of the feed resulted in the higher yield of the extract. Moisture content of 15%, screw speed of 250 rpm and die temperature of 13$0^{\circ}C$ gave the highest yield of ginseng extract. Mean extraction yield of extruded ginseng using hot water extraction was greatly improved by extrusion process The extract yield of extruded ginseng was 43.5% which was higher than that of red ginseng (38.3%) and white ginseng (29.0%) produced by traditional process. It was possible to make from the mixture of microcrystalline cellulose (200 g) mixed with different concentration of 200 mL solution (0, 5, 20, 30 40 50 60% of ginseng extract with 59.2% dry solid) by using cold extrusion spheronization. When the concentration of ginseng extract Increased, the granulation yield was improved but friability and compression index were reduced. Ginseng extract such as saponin was completely released from spheronized granules in distilled water within 10 min. It can be concluded that spheroniged granule with ginseng extract could be packed in gelatin capsule since granules Possessed proper physical properties and quick release of saponin.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.76-85
• /
• 2004

Anaerobic decomposition of municipal solid waste (MSW) had potential adverse impacts such as the production of methane and long-term post closure on human health and the environment. It was demonstrated that aerobic degradation of MSW resulted in the reduction of a methane yield and the enhancement of stabilization of MSW. Excavated solid wastes were both aerobically and anaerobically treated in order to evaluate the effects of air injection on the stabilization of landfill site. The municipal solid waste (MSW) samples were excavated from a 10-year old landfill (operation period: 1991. 11~1994. 11), Jeonju, Korea. Excavated municipal solid wastes are primarily composed of soils and vinyl/plastics. For the two aerobic simulated lysimeters, the levels of $O_2$ ranged 1.6~23.1% and the levels of $CO_2$ ranged 1.5~15.1%, which confirmed the aerobic decomposition. Aeration did prevent methane formation. For the anaerobic simulated lysimeter, the $CO_2$ rose as $O_2$ was consumed and low levels of CH4 were produced. The pH levels ranged from 7.7 to 8.9 for anaerobic lysimeter and from 7.3 to 8.5 for aerobic lysimeters. As expected, aerobic treatment proved to enhance the removal of biodegradable materials in the excavated solid wastes when monitoring the concentration of BOD, COD, $NH_4-N$, and $NO_3-N$ in the leachate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1093-1097
• /
• 2004

This study was aimed to establish the amount of enzose (corn dextrose) for optimum N fixation in urea treated corncobs (UTC) and their dietary effect on nutrient intake, digestibility and milk yield in crossbred cows. Corncobs were treated with 5% urea and ensiled in laboratory silos with 0, 2, 4 and 6% enzose for 15 days. Total nitrogen (N), neutral detergent fiber (NDF) and neutral detergent insoluble N contents were increased in UTC with the level of enzose. Five early lactating crossbred cows (Sahiwal$\times$Holstein Frisian) were used in a 5$\times$5 Latin Square Design to see the influence of UTC ensiled with 6% enzose on nutrient intake, digestibility, milk yield and its composition. Five iso-nitrogenous and iso-caloric diets were formulated. The UTC30 (control), UTC40, UTC50, UTC60 and UTC70 diets contained 30% UTC ensiled without enzose and 40, 50, 60, 70% UTC ensiled with 6% enzose, respectively. Dry matter, NDF and ADF intakes were increased with the increasing level of UTC ensiled with enzose in the diets of cows. Dry matter, NDF and ADF digestibilities were significantly higher with diets containing UTC ensiled with enzose. Milk yield was significantly higher in cows fed UTC70 compared to those fed on other diets. The milk crude protein percentage was significantly different across treatments. However, milk fat, total solids, solid not fat, true protein and non-protein nitrogen contents of milk remained similar across all diets. Ensilation of UTC with 6% enzose improved the nitrogen retention and thus enhanced the feeding value of UTC for lactating cows.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.659-664
• /
• 2012

The present experiment aimed to evaluate the effect of HMBi on the production performance and metabolism in dairy cows. Thirty multiparous Holstein dairy cows under similar conditions were randomly assigned to three dietary treatments; i) Control, a basal diet; ii) T1, a basal diet plus HMBi (0 g prepartum and 18 g postpartum); and iii) T2, a basal diet plus HMBi (10 g prepartum and 18 g postpartum). Treatments were initiated 21 d before expected calving and continued through 91 d postpartum. HMBi was top-dressed onto the total mixed ration of each cow. Treatments did not affect dry matter intake, plasma urea nitrogen, peak milk yield, days to peak milk yield, nonesterified fatty acid, glutamate pyruvate transaminase, glutamic oxalaetic transaminase, milk fat content, milk protein content, milk lactose content, and milk solid non-fat content. The milk composition yields were increased by the HMBi-supplemented treatment. The T1 and T2 treatments increased the yields of 4% fat-corrected milk yield, milk fat, milk protein, and milk lactose compared with the control. Although there was no difference in the milk composition of the control and T2-treated cows, the T2-treated cows exhibited higher milk fat yield (increased by 74 g/d), lower milk urea nitrogen (reduced by 3.41%), and plasma ${\beta}$-hydroxy butyrate than the control cows. The results indicate that HMBi supplementation to diet has beneficial effects, and that there is no difference between supplementation at prepartum and starting only at parturition.

• Journal of Environmental Health Sciences
• /
• v.19 no.2
• /
• pp.23-33
• /
• 1993

The anaerobic digestion of organic synthetic wastewater in anaerobic fluidized bed bioreactor (AFBBR) and anaerobic fluidized packed bed bioreactor (AFPBBR) was studied. This study was conducted to evaluate efficiency and reliability of two reactor. Experiment was performed to find the effect of upflow rate with AFBBR and the height of packed bed with AFPBBR. As a result, this program obtained several conclusion. These are given as follows: As applied the upflow rate increased in AFBBR the produced volume of biogas increased, while the gas production and COD removal decreased at above 0.3 m$^3$/h. When a upflow rate is 0.4 m$^3$/h in AFBBR the volatile suspended solid (VSS) became significantly increased. At an organic loading rate from 0.1 to 0.4 of upflow rate in AFBBR, the methane yield was 1.5584 m$^3$CH$_4$/kgCOD removed, and the observed cell yield coefficient was 0.0933 gVSS/gCOD. In case of AFPBBR, the results showed also that 20 cm of height of packed bed was superior to other in the aspect ot biogas production, the content of methane and COD removal. At 20 cm of height, the profile of microorganisms was stable, while at 30 cm the VSS of effluent became higher than AFBBR. Though COD removal of AFPBBR increased with packed bed, COD removal deteriorate with over packing because the loss of pressure became higher in the reactor. At an organic loading rate from 20 to 40 cm of packed bed in-AFPBBR, the methane yield was 2.5649 m$^3$CH$_4$/kgCOD removed, and the observed cell yield coefficient was 0.0506 gVSS/gCOD. Based upon the results obtained, it is suggested that AFBBR and AFPBBR is the most effective conditions at 0.3 m3/h of upflow rate, the 20cm of packed bed, respectively. The rate constant are summarized as follow:

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.391-398
• /
• 1999

Enzymatic hydrolysis of crushed ginger was carried out to increase the yield of ginger extract, and the quality of the extract was investigated. The first extract was obtained by pressing crushed ginger, and the second extract by pressing ginger pomace hydrolyzed with $\alpha$-amylase at $90^{\circ}C$ for 1 hr. Oleoresin was extracted from the residue of enzymatic hydrolysis with 90% ethyl alcohol. The first extract, second extract and oleoresin were mixed to obtain the final ginger extract. The yield of final extract was increased by 276% on the solid base of the fresh ginger extract. The final ginger extract contained less crude fiber, starch and free amino acids (62, 48 and 40%, respectively), but contained more free sugar (270%) compared to fresh ginger extract.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.38-47
• /
• 1997

Using a concentric cylinder type, rheometer. the steady shear flow properties of vaseline were measured over the temperature range of 20~70${\circ}$C. In this paper, the shea rate and temperature dependencies of its flow behavior were investigated and the validity of some flow models was examined. In addition, the flow characteristics over a wide temperature range were quantitatively evaluated by calculating the various material parameters. Main findings obtained from this study can be summarized as follows: (1) At relatively lower temperature range, vaseline is a plastic fluid with a yield stress and its flow behavior shows shear-thinning characteristics. (2) As the temperature increases, the value of a yield stress and the degree of shear-thinning become smaller, consequently, the Newtonian flow behavior occurs at a lower shear rate range. (3) At temperature range lower than 45${\circ}$C, the flow behavior shows much stronger temperature dependence, and a larger activation energy is needed for flow. (4) The Herschel-Bulkley model is the most effective one g$^3$ to predict the flow behavior of vaseline having a yield stress. The validity of the Bingham and Casson models becomes more available with increasing temperature. The flow behavior of vaseline at temperature range higher than 45${\circ}$C can be perfectly described by the Newton model.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.203-208
• /
• 2011

Effects of particle size and high pressure processing on the extraction rate of oil compounds from soybean powder were evaluated by Soxhlet method using hexane and supercritical fluid extraction (SFE) using $CO_{2}$. SFE was carried out at 4,000 psi and $50^{\circ}C$ for 4 hr. The mean particle sizes were varied from 26.7 to 862.0 ${\mu}m$ by controlling milling time. Saturation solubility increased as the particle size decreased. At large particle size, high pressure processing (HPP) showed higher extraction yield in both hexane extraction and SFE, but, as the particle size decreased, the HPP was irrelevant to the extraction yield in SFE. The higher extraction rate obtained from the smaller particle size. The scanning electronic microscopy of soybean powder treated by HPP showed pores on the surface of the particle. The higher extraction rate and yield from HPP treatment might be due to the less internal resistance of transferring the solvent and miscellar in the solid matrix by collapsing of tissues.

• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.27-33
• /
• 2015

High temperature stress in summer season at plastic house is a limiting factor for tomato fruit set and yield. This study was performed to assess the effects of gibberellic acid ($GA_3$) and 2,4-Dichlophenoxy acetic acid (2,4-D) spray on fruit set, yield, and quality of tomato cv. 'Adoration'(Enza Zaden Co., Ltd.) under the plastic house in Hwacheon, 2011. Four concentrations (0-, 5-, 10- and $15mg{\cdot}L^{-1}$) of $GA_3$, and three concentrations (0-, 5- and $10mg{\cdot}L^{-1}$) 2,4-D were sprayed in early flowering of tomato in the plastic house, and fruit set, yield and quality characters were observed. The results showed that spray of $10mg{\cdot}L^{-1}$ $GA_3$ significantly increased the fruit set by 14.2% than unsprayed. The spray of $GA_3$ significantly increased the marketable fruit number, fruit weight, and yield. The spray of 2,4-D on blossoms significantly affected the fruit set percentage, fruit weight, marketable fruit weight and yield, and the highest fruit set observed as 62.5% in combined spray of $GA_3$ and 2,4-D at each $5mg{\cdot}L^{-1}$. Fruit size and total soluble solids significantly varied with the concentrations of $GA_3$ sprayed. The result indicates that the spray of $10mg{\cdot}L^{-1}$ $GA_3$ and $5mg{\cdot}L^{-1}$ 2,4-D can be more economic and effective to increase the fruit set, and yield in tomato under high temperature condition in plastic house.