• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.116-121
• /
• 2003

In this study, the thermal degradation process has been investigated at various reaction temperature$(350{\sim}400^{\circ}C)$ and times$(30{\sim}120\;min)$ in order to recycle waste plastic films as solid state wax. Waste plastic films were easily melted by adding a small amount of waxes. The effects of wax addition and nitrogen flow rate on their thermal degradation properties were investigated. FT-IR, GPC and viscometer were used to analyze properties of the solid wax including the structure, molicular weight distribution and melt viscosity. The average molecular weight of solid wax was decreased with increasing the reaction time, temperature and amount of wax added, Also, the viscosity of solid wax decreased with increasing the stirring speed at a constant reaction temperature and time, and its viscosity got close to zero above $390^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.70-76
• /
• 1995

Research was conducted at the Wood Materials and Engineering Laboratory, Washington State University, Pullman, WA to evaluate the effects of the sequence of wax addition, wax level, and wax type on mechanical properties and water resistance performance of isocyanate-bonded particleboard. Mechanical properties and water resistance performance were not influenced significantly by the sequence of wax addition. Internal bond and wet modulus of rupture in bending strength were decreased significantly by increasing the wax emulsion level, but dry modulus of rupture and modulus of elasticity in bending strength were not decreased significantly by increasing the wax emulsion level. Dry internal bond, dry and wet moduli of rupture, and modulus of elasticity were not decreased by increasing the solid wax level except for wet internal bond. The addition of 1.0 and 1.5% wax level did not produce any significant additional water resistance effect when compared to the addition of 0.5% wax level. Internal bond values of boards with solid wax addition showed significantly better results than boards with just a wax emulsion added. Modulus of rupture, modulus of elasticity, and water resistance performance did not show significant difference between solid wax and wax emulsion.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.147-151
• /
• 1997

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.258-259
• /
• 2006

New powder compaction process, in which a Bingham semi-solid/fluid mold is utilized, is developed to fabricate micro parts. In the present process, a powder material is filled as slurry in a solid wax mold, dried and compressed. The wax is heated during compaction and becomes semi-solid state, which can acts as a pressurized medium for isostatic compaction. Since the compacted micro parts are very fragile, the mold's temperature is controlled to higher than its melting point during unloading, to avoid breakage of the compacts. To demonstrate effectiveness of this process, some micro compacts of alumina are shown as examples.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.469-479
• /
• 2003

A novel branched wax has been developed for the control of the hardness of oil-wax gels. Using this wax, glossier application and smoother texture but tough lipstick can be obtained. Oil-wax gels are oily solids composed of liquid and crystalline solid oils (waxes). They are widely used in various cosmetic products, especially lipsticks. The control of gel hardness is one of the most important techniques in improvement of the lipstick quality. Addition of small amounts of commercial branched paraffin wax (e.g. microcrystalline wax, b-PW) to n-paraffin wax (n-PW) has been commonly used to increase gel hardness. However, gel hardness is very sensitive to the quantity of b-PW and the gel obtained is not always hard enough for practical use. In this study we examined the relationship between the gel hardness and the properties of the wax crystal in the gel. We have found that, when b-PW is added to n-PW, the wax crystal size becomes smaller (hardening the gels) and its crystallinity is decreased (softening the gels) simultaneously. Considering this result, we have developed a novel branched wax, Bis(polyethylenyl)- tetramethyldisiloxane (named ESE). ESE molecules are composed of a central tetramethyldisiloxane unit (branch unit) with polyethylene units at both ends. The central unit may suppress crystal growth while the ends are expected to prevent a decrease in wax crystallinity during crystallization. When ESE is added to n-PW, the wax crystal obtained becomes smaller without decreasing in crystallinity; consequently, the gel hardness is dramatically increased. By using ESE, the total amount of wax in a lipstick can be decreased by 30％ without spoiling the stick toughness, thereby achieving glossy application and smooth texture.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.376-381
• /
• 2013

High molecular weight paraffinic waxes dissolved in oil phases can be precipitated when the surrounding temperature becomes lower than the wax appearance temperature (WAT). While the various methods of WAT determination have been developed, the determination of precipitated wax amount has not been comparably popular at temperatures below the WAT. It is important to predict how much solid wax content precipitates in temperature variance. The study develops the previous method which uses integrated areas determined at a wavenumber range of 735~715 $cm^{-1}$. This method uses two different wavenumber ranges, 735~715 $cm^{-1}$ and 1,402~1,324 $cm^{-1}$. The study shows how the method provides reliable data in the variety of applications regardless of FTIR spectral instability often occurred, such as volume reduction during cooling procedure and existence of emulsified water in oil phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.114.2-114.2
• /
• 2010

Fisher-Tropsch 반응을 통하여 생성되는 왁스는 황 또는 질소 성분을 포함하지 않으며 또한 방향족 및 중금속 성분이 없기 때문에 청정 수송유로써 사용이 가능하다는 장점이 있다. 그러나 Fisher-Tropsch 왁스는 그 분자량이 매우 큰 사슬형 탄화수소이기 때문에 수소첨가 분해반응을 통하여 중질유 range의 탄소수를 갖는 탄화수소로의 전환 기술이 반드시 필요하다. 이러한 수소첨가 분해반응에 사용되는 촉매는 강한 산점을 지니고 있는 양이온 교환 지르코니아가 대표적이라 할 수 있는데 최근 들어 강한 산점과 높은 산밀도, 그리고 기공의 모양과 크기에 따라 특정 반응이 제어되거나 활성화되는 형상선택성을 가지고 있기 때문에 다양한 반응에 촉매로 사용되는 제올라이트에 Pt 등의 귀금속을 담지한 촉매를 사용하여 Fisher-Tropsch 왁스의 전환율 및 중질유분의 선택도를 높이는 기술에 대한 연구가 활발히 진행되고 있다. 따라서 본 연구에서는 다양한 제올라이트 촉매에 귀금속을 담지하여 촉매를 제조하고 1L 급 고압 배치형 반응기를 이용하여 Fisher-Tropsch 왁스의 수소첨가 분해반응에 의한 중질유 제조 실험을 수행하고 그 결과를 고찰하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.1
• /
• pp.31-37
• /
• 2012

Purpose: This study evaluated the usefulness of Helmet bolus device using Bolx-II, paraffin wax, solid thermoplastic material in total scalp irradiation. Materials and Methods: Using Rando phantom, we applied Bolx-II (Action Products, USA), paraffin wax (Densply, USA), solid thermoplastic material (Med-Tec, USA) on the whole scalp to make helmet bolus device. Computed tomography (GE, Ultra Light Speed16) images were acquired at 5 mm thickness. Then, we set up the optimum treatment plan and analyzed the variation in density of each bolus (Philips, Pinnacle). To evaluate the dose distribution, Dose-homogeneity index (DHI, $D_{90}/D_{10}$) and Conformity index (CI, $V_{95}/TV$) of Clinical Target Volume (CTV) using Dose-Volume Histogram (DVH) and $V_{20}$, $V_{30}$ of normal brain tissues. we assessed the efficiency of production process by measuring total time taken to produce. Thermoluminescent dosimeters (TLD) were used to verify the accuracy. Results: Density variation value of Bolx-II, paraffin wax, solid thermoplastic material turned out to be $0.952{\pm}0.13g/cm^3$, $0.842{\pm}0.17g/cm^3$, $0.908{\pm}0.24g/cm^3$, respectively. The DHI and CI of each helmet bolus device which used Bolx-II, paraffin wax, solid thermoplastic material were 0.89, 0.85, 0.77 and 0.86, 0.78, 0.74, respectively. The result of Bolx-II was the best. $V_{20}$ and $V_{30}$ of brain tissues were 11.50%, 10.80%, 10.07% and 7.62%, 7.40%, 7.31%, respectively. It took 30, 120, 90 minutes to produce. The measured TLD results were within ${\pm}7%$ of the planned values. Conclusion: The application of helmet bolus which used Bolx-II during total scalp irradiation not only improves homogeneity and conformity of Clinical Target Volume but also takes short time and the production method is simple. Thus, the helmet bolus which used Bolx-II is considered to be useful for the clinical trials.

• Journal of the KSME
• /
• v.16 no.2
• /
• pp.116-121
• /
• 1976

Non-steady hot wire method was adopted to measure thermal coductivity of paraffin wax in the phases of liquid and solid for the utilization of thermal energy storage. The instrument was tested with the measurement of thermal conductivity of water at various temperatures. The reproducibility of the instrumetn was found to be ${\pm}2%$, in which the results for water agree with the literature values. The thermal conductivity of paraffin wax varies from 0.177 W/m C to 0.236 W/m C when the phase changes from liquid to solid near the melting temperature.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.144-147
• /
• 2013

Sweating, which is the excretion of oil on the surface of a solid product containing several kinds of pigments in oil and is also solidified with wax, is a unique phenomenon often observed on the surface of cover make-up or lipstick. The cause of sweating is an imbalanced formula. Many studies have been conducted to decrease the symptoms of sweating in the field of cosmetics. Differential scanning calorimetry (DSC) is a thermo-analytical technique that measures the amount of heat required to increase the temperature of a sample as a function of temperature or time under certain conditions. DSC has been used to determine the thermal properties of oil/wax structures. This study investigates how the thermal characteristics correlate with the sweating symptoms. An oil/wax formulation with an optimal melting point was studied in an attempt to make a stable product by considering the thermal properties that represent minimal structural changes with temperature variation. In addition, the sweating of the oil/wax formulation was observed over a various temperature range. As a result, it was found that sweating was minimized when the structure remained static or little bit changed over a variety of temperatures.