• 대한의용생체공학회:의공학회지
• /
• 제12권1호
• /
• pp.57-62
• /
• 1991

ABA type block copolymers composed of poly($\gamma-benzyl$ L-glutamate) (PBLG) as the A component and poly (ethylene glycol) as the B component were obtained by polymerization of $\gamma-benzyl$ L-gletamate N -carboxyanhydride, initiated by amino groups at both ends of poly(ethylene glycol) . From circular dichroism measurements in ethylene dichloride solution as well as from infrared spectTa measurements in solid state, it was found that the polypep- tide block exists in the a-helical conformation, as in PBLG homopolymer. $Poly-N^5$ (3-hydroxypropyl glutamine) (PHPG)/poly(ethylene glycol)block copolymer hydrogel was obtained by the treatment of PBLG/PBG block copolymer with the mixture of 3-ammine-1-propanol and diamlnooctane. The water content of PHPG/PEG block copolymer hydrogel was about 80wt% when the concentration of crosslinking agent was below 5 mole % per polymer.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.47-50
• /
• 2003

Carbon-silica membranes were Prepared by Pyrolyzing polyimide/silica composite obtained from ill-situ polymerization of alkoxy silanes via sol-gel reaction. In this study, effects of silica content and silica network in polyimide matrix were focused on the gas permeation and separation properties of the final carbon-silica membrane. The membranes prepared were characterized with a field emission scanning electron microscopy (FE-SEM), a solid state $^{29}$ Si nuclear magnetic resonance spectroscopy ($^{29}$ Si-NMR), an electron spectroscopy for chemical analysis (ESCA), a thermogravimetric analysis (TGA) and gas permeation tests.

• 폴리머
• /
• 제26권1호
• /
• pp.28-36
• /
• 2002

본 연구에서는 바이오칩 등에 응용 가능한 전도성 고분자 필름을 제조하기 위해 3-triophene acetic acid을 선택하여, 쉽게 전기적으로 산화되어 전기적 활성을 나타내는 고분자들을 형성하였다. 3-Thiophene acetic acid에 있는 카르복실기의 보호기들은 solid state에서 쉽게 제거되어질 수 있고, 그 결과 반응성 카르복실기가 전기적 활성을 나타내는 고분자 표면 위에 재생되어질 수 있었다. 즉, 카르복실기의 보호를 통한 전기중합과 뒤이은 보호기의 제거로 반응성인 카르복실기를 갖는 새로운 고분자 담체를 제조할 수 있었고, 기존의 방법으로 합성한 macromonomer를 필름 표면에 도입하여 전기적 활성을 나타내며 동시에 고분자 전해질이 도입된 전도성 고분자 필름을 얻었다. 합성한 전도성 단량체들과 macromonomer의 도입여부는 FT-IR과 $^1H-NMR$ 및 ESCA측정으로 확인하였고, 전극표면에 형성된 필름들의 형태는 SEM을 통해서 관찰하였다. 전기적 활성은 cyclic voltammogram(CV)을 통하여 확인하였으며, 얻어진 고분자 필름들은 0.7~0.9 V의 영역에서 전형적인 poly(3-alkylthiophene)의 전기 화학적 거동을 나타내었다.

• 한국재료학회지
• /
• 제19권4호
• /
• pp.220-223
• /
• 2009

Lithium dihydrogen phosphate ($LiH_2PO_4$) powder was purchased from Aldrich Chemical Co. From the scanning electron microscope (SEM) observation, these polycrystals have dimensions in the range of $25-250{\mu}m$. The electrical conductivity was measured at a measuring frequency of 1 kHz on heating polycrystalline lithium dihydrogen phosphate ($LiH_2PO_4$) from room temperature to 493 K. Two anomalies appeared at 451 K ($T_{p1}$) and 469 K ($T_{p2}$). The electrical conductivity reached the magnitude of the superprotonic phases: $3{\times}10^{-2}{\Omega}^{-1}cm^{-1}$ at 451 K ($T_{p1}$) and $1.2{\times}10{\Omega}^{-1}cm^{-1}$ at 469 K ($T_{p2}$). It is uncertain whether the superprotonic phase transformations are due to polymorphic transitions in the bulk, surface transitions, or chemical reactions (thermal decomposition) at the surface. Considering several previous thermal studies (differential scanning calorimetry and thermogravimetry), our experimental results seem to be related to the last case: chemical reactions (thermal decomposition) at the surface with the progressive solid-state polymerization.

• 멤브레인
• /
• 제20권1호
• /
• pp.55-61
• /
• 2010

원자전달 라디칼 중합을 이용하여 polystyrene-b-poly(oxyethylene methacrylate) (PS-b-POEM) 블록 공중합체를 합성하고, FT-IR을 통해 중합이 성공적으로 이루어졌음을 확인하였다. 또한 자기 조립된 블록 공중합체 막을 제조한 후, 전구체 $AgCF_3SO_3$ 도입과 UV 조사를 통해 고체상에서 은 나노입자를 성장시켰다. TEM 전자현미경과 UV-visible 분광학 분석을 통해 블록 공중합체 막의 내부에 은 나노입자가 형성된 것을 확인하였고, 또한 친수성 POEM 영역의 함량을 조절함으로써 나노입자의 크기를 조절할 수 있었다. 금속 나노입자를 제조하는 데 있어서 POEM 함량이 적은 블록 공중합체가 더 효과적임을 확인하였다.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1348-1353
• /
• 2010

신디오탁틱 폴리스타이렌의 벌크 중합 시, 반응의 초기단계에서 균일하던 반응혼합물은 반응이 진행됨에 따라 점차 침전된 고형 sPS와 액체 반응생성물로 형성된 슬러리 상태로 변해간다. 반응이 더 진행되면 고형 침전물의 양이 많아지고 반응물이 엉겨 붙는 현상을 적절한 방법으로 해소하면 슬러리 상태에서 젖은 분말 형태 더 나가서는 마른 분말 형태의 반응 생성물을 얻게 된다. 전화율을 높이기 위해 촉매와 조촉매의 양을 늘리는 경우 반응성생물은 어느 순간 한 덩어리가 되어 더 이상의 반응 제어가 불가능해진다. 이 연구에서는 이렇게 덩어리로 응집되는 현상을 막고 고 전화율의 반응이 가능하도록 특별한 방법을 사용하였다. 촉매와 조촉매를 한 번에 투입하지 않고 여러 단계로 나누어 투입하는 경우 반응물의 응집을 막고 전화율을 높게 유지할 수 있었다. 또한 이 방법은 sPS의 분자량을 높이는데도 도움이 되는 것을 알 수 있었다.

• 분석과학
• /
• 제17권2호
• /
• pp.173-179
• /
• 2004

Ethylene glycol의 polymerization-complex route를 통한 졸-겔 합성법으로 안정하고 균일한 barium titanate 분말 및 박막을 제조하였다. 출발 용액으로 킬레이팅 리간드인 acetylacetone을 barium과 titanium 용액에 치환시켜 합성한 복합 산화물 졸 용액을 사용했을 때 박막을 만들 수 있었다. 졸 용액의 입자 분포도는 안정한 gaussian 분포를 보였으며, $1100^{\circ}C$에서 열처리한 겔 분말의 입자 크기는 40~77 nm이었다. 열분석 및 FT-IR, $^{13}C$ CP/MAS NMR 스펙트라와 XRD 결과로부터 (Ba-Ti)-oxycarbonate 중간상을 거쳐 $BaTiO_3$ 분말이 형성됨을 알 수 있었다. Quartz에 스핀 코팅으로 제조한 박막은 치밀하고 균열 없는 미세 조직을 보였다. $1100^{\circ}C$에서 열처리한 박막 표면의 입자 크기는 220 nm였으며 치밀한 입자 성장을 관찰할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.251.2-251.2
• /
• 2010

Plant biomass has been proposed to be an alternative source for petroleum-based chemical compounds. Especially, phenolic chemical compounds can be obtained from lignin by chemical depolymerization processes because lignin consists of complex aromatic polymer such as trans-p-coumaryl, coniferyl and sinapyl alcohols, etc. Phenolic chemical compounds from lignin were usually produced in super critical water. However, we applied Near-critical water (NCW) system because NCW is known as a good solvent for lignin depolymerization. Organic matter like lignin can be solved in NCW system and the system has a unique acid-base property without conventional non-eco-friendly chemicals such as sulfuric acid and sodium hydroxide. In this work, we tried to optimize the NCW depolymerization system by adjusting the processing variables such as reaction time, temperature and pressure. Moreover, the amount of additional phenol was optimized by changing the molar ratio between water and phenol. Phenol was used as capping agent to prevent re-polymerization of active fragment such as formaldehyde. Alkali-lignin was used as a starting material and characterized by a Solid State 13C-NMR, FT-IR and EA (Elemental Analysis). GC-MS analysis confirmed that o-cresol, p-cresol, anisole and 4-hydroxyphathalic acid were the main product and they were quantitatively analyzed by HPLC.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.301-306
• /
• 2009

This work has demonstrated that a novel amphiphilic poly(epichlorohydrine)-graft-polystyrene (PECH-g-PS) copolymer at 34:66 wt% was synthesized via atom transfer radical polymerization (ATRP) of styrene using PECH as a macroinitiator. The structure of the graft copolymer was characterized by nuclear magnetic resonance ($^1H$ NMR) and FTIR spectroscopy, demonstrating that the "grafting from" method using ATRP was successful. The self-assembled graft copolymer was used as a template film for the in-situ growth of silver nanoparticles from $AgCF_3SO_3$ precursor under UV irradiation. The in situ formation of silver nanoparticles with 6-8 nm in average size in the solid state template film was confirmed by transmission electron microscopy (TEM), UV-visible spectroscopy and wide angle X-ray scattering (WAXS). Differential scanning calorimetry (DSC) also displayed the selective incorporation and the in situ formation of silver nanoparticles within the hydrophilic PECH domains, probably due to stronger interaction of the silvers with the ether oxygens of PECH backbone than that with hydrophobic PS side chains.

• 전기화학회지
• /
• 제14권2호
• /
• pp.83-91
• /
• 2011

Mesoporous titanium dioxide ($TiO_2$) thin films were prepared using poly(vinyl chloride)-graft-poly(N-vinyl pyrrolidone) (PVC-g-PVP) as a templating agent via sol-gel process. Grafting of PVC chains from PVC backbone was done by atom transfer radical polymerization (ATRP) technique. The successful grafting of PVP to synthesize PVC-g-PVP was checked by fourier-transform infrared spectroscopy (FT-IR) and gel permeation chromatography (GPC). The carbonyl group interaction of PVC-g-PVP graft copolymer with $TiO_2$ was confirmed by FT-IR. The porous morphologies of the $TiO_2$ films genereated after calcination at $450^{\circ}C$ was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The mesoporous $TiO_2$ films with 580 nm in thickness were used as a photoelectrode for solid state dye sensitized solar cell (DSSC) and showed an energy conversion efficiency of 1.05% at 100 $mW/cm^2$.